Scribd
Upload
154 views2 pages

Specifition-Sheet For Evaporator 1. Customer Details A. B. C. D. E. 2. Data Required For Evaporator

This document provides specifications for an evaporator. It includes details about the customer, inlet and outlet data requirements, materials of construction needs, design considerations, and utility requirements. The evaporator will be a double effect unit that processes a sodium hydroxide solution at up to 150°C, concentrating it from 78% to 133.75% total solids. Steam and electricity will be needed to power the evaporator.

Uploaded by

Towfiq Hossain Tasku
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
154 views2 pages

Specifition-Sheet For Evaporator 1. Customer Details A. B. C. D. E. 2. Data Required For Evaporator

This document provides specifications for an evaporator. It includes details about the customer, inlet and outlet data requirements, materials of construction needs, design considerations, and utility requirements. The evaporator will be a double effect unit that processes a sodium hydroxide solution at up to 150°C, concentrating it from 78% to 133.75% total solids. Steam and electricity will be needed to power the evaporator.

Uploaded by

Towfiq Hossain Tasku
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

SPECIFITION-SHEET FOR EVAPORATOR

1.
a.
b.
c.
d.
e.

CUSTOMER DETAILS
Customer Name
Official Address
Contact Number
Contact Person
Email

2.

DATA REQUIRED FOR EVAPORATOR

Type of Evaporator based on


Construction

Type based on No. of Stages

INLET FEED DATA

1.
2.
3.
4.
5.
6.
7.

Feed rate in kg/s


Water evaporation capacity kg/hr
Product rate kg/s
Operationg time
Shut down ability
Cooling of Product required
Maximun processing temperature

1.

Type of feed

2.

Feed Composition

3.
4.
5.
6.

Total Solid content in %w/w


Dissolved Solids in Feed %w/w
Suspended Solids in feed %w/w
Density of feed gm/cc
Temperature in 0C

7.

Natural Circulation

Double Effect

1.987
0.26
24 hr
45%
150C

1. Homogeneous Solution
2. Slurry
1. NaOH = 32 %kg/kg
2. H2O = 68 %kgl/kg

78

8.
9.

Viscosity in cP (Centipoise)
pH

11

1.
2.
3.
4.
5.

OUTLET PRODUCT DATA


Desired Total Solid Content %w/w
Density of feed gm/cc
Viscosity in cP (Centipoise)
pH
Required Temperature in 0C

133.75

1.
2.

MOC REQUIREMENTS
Contact/Wetted Parts
Non-Contact/ Non-Wetted Parts

1.
2.
3.
4.
5.
6.

SPECIAL CONSIDERATIONS FOR DESIGN


Foaming Tendency
Yes
Scaling/Fouling tendency
No
Crystallizing Tendency
Yes
Caking tendency
No
Solution type
Saturated
Corrosive nature
No

Specific gravity
7.

Physical properties

Concentration
Specific heat
BPE

150C

SERVICES (UTILITIES)
Steam (kg/s)
Cooling water
Electricity
At what pressure

Yes
0.3126

POWER AVAILABILITY
Specify Supply Voltage in Volts &

3 phase grid power

6 bar max

You might also like