Scribd
Upload
58 views2 pages

Pressure Relief Valves: Dimensions (MM) Hydraulic Diagram

The document describes a direct acting, poppet type pressure relief valve. It has a maximum flow of 100 l/min and maximum pressure of 400 bar. It works across various pressure ranges depending on the installed spring. Oil is allowed to flow from port P to port T when the pressure in P reaches the spring setting. The valve has a hysteresis of 85% of the setting value at 1 l/min flow. Installation and operating recommendations are provided regarding fluid type, filtration, lubrication, and cavities/tools.

Uploaded by

Libin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views2 pages

Pressure Relief Valves: Dimensions (MM) Hydraulic Diagram

The document describes a direct acting, poppet type pressure relief valve. It has a maximum flow of 100 l/min and maximum pressure of 400 bar. It works across various pressure ranges depending on the installed spring. Oil is allowed to flow from port P to port T when the pressure in P reaches the spring setting. The valve has a hysteresis of 85% of the setting value at 1 l/min flow. Installation and operating recommendations are provided regarding fluid type, filtration, lubrication, and cavities/tools.

Uploaded by

Libin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRESSURE RELIEF VALVES

VMP 20
DIMENSIONS (mm)

HYDRAULIC DIAGRAM

ASSEMBLY DIAGRAM

DESCRIPTION

CROSS SECTION

Direct acting, poppet type.

OPERATION
Allows oil flow from P to T when pressure in P reaches the setting of the spring.

PERFORMANCE
Maximum flow: 100 l/min.
Maximum Pressure: 400 bar.
Application range with standard springs:
- 5 40 bar
- 20 80 bar
- 50 220 bar
- 180 350 bar
To perform setting of the valve see the pressure drop/ flow diagram.
Hysteresis: 85% of the setting value for flow capacity 1 l/min.
Oil leaks from P to T: disregardable.
Working temperature:
- min. -25C max. 90C with standard BUNA N gaskets
- min. -20C max. 200C with optional VITON gaskets

RECOMMENDATIONS
Fluid: best use mineral oil with viscosity ranging between 10 and 200 cSt.
Filter: see page Z.9000.000.
Installation: make sure to provide suitable gasket lubrication with clean oil before screwing the
cartridge on the valve body . Also make sure to screw the cartridge manually in to reach against the
gaskets in the valve body.
OLEOSTAR S.p.A. Reggio Emilia ITALY

1.1000.300

10/11/2004

Cavities and tools: see page Z.1100.030.


Weight: 0,45 kg
Material: internal components made out of high grade steel duly treated and fabricated.
For more information please ask our technical office .
Variations and modifications of technical features and dimensions are reserved. OLEOSTAR S.p.A. also reserves the right to stop production of
each and any model listed in the catalogue with no notice.
Copy rights on the text contained herein belong to OLEOSTAR S.p.A. . Partial and full reproductions or copies of this catalogue are forbidden.

RATING DIAGRAMS

ADJUSTMENTS

CODE NUMBER

VMP p / p . p

20
20Y

Pressure settings (bar)


TB)
TV)
TS)
TR)

1.1000.300

540
2080
50220
180350

Adjustment
S
V
W
P
PV

You might also like