Scribd
Upload
47 views2 pages

Iav Design Brief

Team must design a vehicle that can switch from two modes: Human controlled and Computer controlled which will help it get through the obstacles that will be set as the playfield. Must integrate a method to manually operate and control that utilizes a non-physical interface. Must submit a complete bill of materials and electronics using the attached spreadsheet. Common items or salvaged recycled goods such as cardboard popsucle sticks, soda cans, and scrap wood should be included in the bill of materials but should be listed at a cost of

Uploaded by

api-308243323
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
47 views2 pages

Iav Design Brief

Team must design a vehicle that can switch from two modes: Human controlled and Computer controlled which will help it get through the obstacles that will be set as the playfield. Must integrate a method to manually operate and control that utilizes a non-physical interface. Must submit a complete bill of materials and electronics using the attached spreadsheet. Common items or salvaged recycled goods such as cardboard popsucle sticks, soda cans, and scrap wood should be included in the bill of materials but should be listed at a cost of

Uploaded by

api-308243323
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Bollman

Technical

Design Brief
Client Company:
Designers:

Arturo sabas

Problem Statement:

Design Statement:

Design Criteria:

Design Constraints:

Must design a vehicle that can switch from two modes: Human
controlled and Computer controlled which will help it get through
the obstacles that will be set as the playfield.
A. May use any commercially available robiotics control systems
including but not limited to: lego, RCX/NXT/EV3, VEX, parallax,
Arduino, Raspberry pi, Beagle Black, or PCDuino
B. Must integrate a method to manually operate and control that
utilizes a non-physical interface. This system includes any
publicy available radio moduls in the ISM Band (WiFi, Bluetooth,
Xbee) or by Infrared (IR) remote.
C. Must submit a complete bill of materials and electronics using
the attached spreadsheet. This includes all robot controllers, kits,
sensors, batteries, and wires Common items or salvaged
recycled goods such as cardboard popsucle sticks, soda cans,
and scrap wood should be included in the bill of materials but
should be listed at a cost of $0.00 (Teams will be rewarded for
being resourceful and cost effective.
D. Sensors are encouraged. All eletectrical wiring, including sensors,
must be clearly documented in the design notebook.
E. If we choose to do the payload challenge the payload will be on a
pedestal and must be picked up, and moved to the end
A.
B.
C.
D.

The vehicle cannot exceed a rectanlgular foot print of 10in x 10in


Weight of the vehicle with battery shall not exceed 20lbs.
MUST BE SAFE
Payload must be move autonomously

2012 Project Lead The Way, Inc.


IED Design Brief Template Page 1

2012 Project Lead The Way, Inc.


IED Design Brief Template Page 2

You might also like