17-4 PH Data Sheet

P
17-4 PH STEEL
STAINLESS
UNS S17400
AK Steel 17-4 PH is a martensitic

precipitation-hardening stainless steel that
provides an outstanding combination of
high strength, good corrosion resistance,
good mechanical properties at temperatures up to 600F (316C), good toughness
in both base metal and welds, and shorttime, low-temperature heat treatments
that minimize warpage and scaling. This
versatile material is widely used in the
aerospace, chemical, petrochemical, food
processing, paper and general metalworking industries.
COMPOSITION
%
Carbon
Manganese
Phosphorus
Sulfur
Silicon
Chromium
Nickel
Copper
Columbium plus Tantalum
0.07 max.
1.00 max.
0.040 max.
0.030 max.
1.00 max.
15.00 - 17.50
3.00 - 5.00
3.00 - 5.00
0.15 - 0.45
AVAILABLE FORMS
STANDARD HEAT TREATMENTS
AK Steel produces 17-4 PH Stainless

Steel sheet and strip in thicknesses from
0.015" to 0.125" (0.38 to 3.18 mm) in
Condition A.
As supplied from the mill in Condition

A, AK Steel 17-4 PH Stainless Steel
can be heat treated at a variety of
temperatures to develop a wide range
of properties. Eight standard heat
treatments have been developed.
Heat To
15F
(8.4C)
Time at
Temperature,
hour
Type of
Cooling
H 900
H 925
H 1025
H 1075
H 1100
H 1150
H 1150+1150
900F (482C)
925F (496C)
1025F (551C)
1075F (580C)
1100F (593C)
1150F (621C)
1150F (621C)
1
4
4
4
4
4
4
Air
Air
Air
Air
Air
Air
Air
H 1150-M
1150F (621C)
1400F (760C)
Condition
Condition A
Solution Treated
1900F 25F
(1038C 14C)
Air cool below
90F (32C)
followed by
4
2
Air
Air
followed by
1150F (621C)
Air
FORMABILITY
CORROSION RESISTANCE
Because this alloy in Condition A is hard,

forming normally should be limited to
mild operations. However, formability
can be greatly improved by heat treating before cold working or by use of
hot-forming methods.
AK Steel 17-4 PH Stainless Steel withstands corrosive attack better than any
of the standard hardenable stainless
steels and is comparable to Type 304 in
most media.
17-4 PH-S-8-01-07
AK STEEL 17-4 PH STAINLESS STEEL DATA SHEET

MECHANICAL PROPERTIES
Typical Mechanical Properties*

Property
H 900
H 925
Condition
H 1025
H 1075
H 1150
H 1150-M
UTS, ksi
(MPa)
160
(1103)
210
(1448)
200
(1379)
185
(1276)
175
(1207)
160
(1103)
150
(1034)
0.2% YS, ksi 145

(MPa)
(1000)
200
(1379)
195
(1345)
170
(1172)
165
(1148)
150
(1034)
130
(896)
Elongation,
% in 2"
(50.8 mm)
5.0
7.0
8.0
8.0
8.0
11.0
12.0
Hardness,
Rockwell
C35
C45
C43
C38
C37
C35
C33
*Cold-flattened sheets and strip.
PHYSICAL PROPERTIES
Density, lbs/in (g/cm )

3
SPECIFICATIONS
Specifications are listed without revision

indications. Contact ASTM Headquarters
for latest ASTM revision. For AMS revision, contact AMS Division of SAE.
AMS 5604 Sheet, Strip and Plate
Condition
A
(Magnetic)
Condition
H 900
(Magnetic)
Condition
H 1075
(Magnetic)
Condition
H 1150
(Magnetic)
0.28 (7.78)
0.282 (7.80)
0.283 (7.81)
0.284 (7.82)
98
77
0.11 (0.46)
0.11 (0.46)
Electrical Resistivity,
microhm-cm
Specific Heat
BTU/lb/ F (32 - 212F)
kJ/kgK (0 - 100oC)
common member of the class and is generally considered to have the best
weldability. When a weld filler is needed,
AWS E/ER 630 is most often specified.
AK Steel 17-4 PH Stainless Steel is well
known in reference literature and more
information can be obtained in this way.
WELDABILITY
METRIC CONVERSION
Data in this publication are presented in

U.S. customary units. Approximate
metric equivalents may be obtained by
performing the following calculations:
Length (inches to millimeters)
Multiply by 25.4
Thermal Conductivity
BTU/hr/ft2/in/F (W/mK)
300F (149C)
500F (260C)
900F (482C)
Mean Coefficient of Thermal Expansion
in/in/F (m/mK)
100 - 70F (-73 - 021C)
70 - 200F (21 - 093C) 6.0 x 10-6 (10.8)

70 - 600F (21 - 316C) 6.2 x 10-6 (11.2)
70 - 800F (21 - 427C) 6.3 x 10-6 (11.3)
ASTM A 693 Plate, Sheet and Strip

(Listed as Grade 630-UNS S17400)
Strength (ksi to megapascals or

meganewtons per square meter)
Multiply by 6.8948
124 (17.9)
135 (19.5)
157 (22.6)
5.8
6.0
6.3
6.5
The precipitation hardening class of stainless steels is generally considered to be

weldable by the common fusion and resistance techniques. Special consideration is
x 10-6 (10.4)
x 10-6 (10.8) 6.3 x 10-6 (11.3)

x 10-6 (11.3) 6.6 x 10-6 (11.9)
x 10-6 (11.7) 6.8 x 10-6 (12.2)
Temperature (Fahrenheit to Celsius)

(Fahrenheit - 32) Multiply by 0.5556
6.1 x 10-6 (11.0)
6.6 x 10-6 (11.9)
7.1 x 10-6 (12.8)
7.2 x 10-6 (13.0)
required to achieve optimum mechanical

properties by considering the best heattreated conditions in which to weld and
which heat treatments should follow
welding. This particular alloy is the most
Density (pounds per cubic inch to

kilograms per cubic meter) Multiply
by 27,670
The information and data in this product data sheet are
accurate to the best of our knowledge and belief, but are
intended for general information only. Applications suggested for the materials are described only to help readers
make their own evaluations and decisions, and are neither
guarantees nor to be construed as express or implied
warranties of suitability for these or other applications.
Data referring to mechanical properties and chemical
analyses are the result of tests performed on specimens
obtained from specific locations with prescribed sampling
procedures; any warranty thereof is limited to the values
obtained at such locations and by such procedures. There
is no warranty with respect to values of the materials at
other locations.
Customer Service 800-331-5050
AK Steel and the AK Steel logo, 17-4 PH, 17-7 PH and

PH 15-7 Mo are registered trademarks of AK Steel
Corporation.
AK Steel Corporation
9227 Centre Pointe Drive
West Chester, OH 45069
www.aksteel.com
2007 AK Steel Corporation
7100-0096 7/07

17-4 PH Data Sheet

Uploaded by

Copyright:

Available Formats

17-4 PH Data Sheet

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

17-4 PH Data Sheet

Uploaded by

Copyright:

Available Formats

P

AK Steel 17-4 PH is a martensitic

STANDARD HEAT TREATMENTS

AK Steel produces 17-4 PH Stainless

As supplied from the mill in Condition

Because this alloy in Condition A is hard,

AK STEEL 17-4 PH STAINLESS STEEL DATA SHEET

Typical Mechanical Properties*

0.2% YS, ksi 145

*Cold-flattened sheets and strip.

Density, lbs/in (g/cm )

Specifications are listed without revision

Data in this publication are presented in

70 - 200F (21 - 093C) 6.0 x 10-6 (10.8)

ASTM A 693 Plate, Sheet and Strip

Strength (ksi to megapascals or

The precipitation hardening class of stainless steels is generally considered to be

x 10-6 (10.8) 6.3 x 10-6 (11.3)

Temperature (Fahrenheit to Celsius)

required to achieve optimum mechanical

Density (pounds per cubic inch to

Customer Service 800-331-5050

AK Steel and the AK Steel logo, 17-4 PH, 17-7 PH and

You might also like