Scribd
Upload
302 views

Chapter 7 C F I D: Figure 7-16. Example Basic Neutralizer Control System

This document discusses a piping and instrumentation diagram showing a basic neutralizer control system. It includes a figure of the diagram and then poses three questions about the diagram with short answers. The questions are about the tag number convention, the type of flow measurement technique used by certain field devices, and whether the valves have digital positioners.

Uploaded by

Navneet Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
302 views

Chapter 7 C F I D: Figure 7-16. Example Basic Neutralizer Control System

This document discusses a piping and instrumentation diagram showing a basic neutralizer control system. It includes a figure of the diagram and then poses three questions about the diagram with short answers. The questions are about the tag number convention, the type of flow measurement technique used by certain field devices, and whether the valves have digital positioners.

Uploaded by

Navneet Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

111

CHAPTER 7 CONTROL AND FIELD INSTRUMENTATION DOCUMENTATION

process are shown in this piping and instrumentation diagram illustrated


in Figure 7-16.
After reviewing this diagram, consider the following questions and
answers.

Figure 7-16. Example Basic Neutralizer Control System

Question: What tag number convention is shown in this


example?
Answer: The expanded tag number convention, defined by
the ISA-5.1 standard, is not used in this example since the
tag only contains function letters and a loop number.
Question: Flow measurements are made using FT101,
FT102, and FT105. What type of measurement technique is
used by these field devices?
Answer: The field device is shown as installed inline and
the liquid is conductive. Thus, a magnetic flowmeter is
installed.
Question: Do the valves have digital positioners?
Answer: Yes, an electric signal is shown going directly to a
box located on each valve. The pneumatic line from the

You might also like