Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Airtel Remote Configure

    Uploaded by

    Soumen
    The document provides instructions for programming an Airtel digital TV remote to control a TV. It describes pressing specific buttons on the Airtel remote and the TV remote in sequence to teach the Airtel remote the codes for power, mute, AV input, and volume controls.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Airtel Remote Configure

    Uploaded by

    Soumen
    1K views3 pages
    The document provides instructions for programming an Airtel digital TV remote to control a TV. It describes pressing specific buttons on the Airtel remote and the TV remote in sequence to teach the Airtel remote the codes for power, mute, AV input, and volume controls.

    Original Description:

    How To Configure Airtel Dth Universal Remote

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for programming an Airtel digital TV remote to control a TV. It describes pressing specific buttons on the Airtel remote and the TV remote in sequence to teach the Airtel remote the codes for power, mute, AV input, and volume controls.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    1K views3 pages

    Airtel Remote Configure

    Uploaded by

    Soumen
    The document provides instructions for programming an Airtel digital TV remote to control a TV. It describes pressing specific buttons on the Airtel remote and the TV remote in sequence to teach the Airtel remote the codes for power, mute, AV input, and volume controls.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    You are on page 1of 3

    First Align your TV remote and airtel remote parallel to each other and

    make sure both infrared heads are aligned parallel to each other . Here
    is the setup apparatus :

    Press OK + 2 buttons on the Airtel Remote until the LED Blinks For Two
    Times

    Now the Airtel Remote is in Learning Mode


    Now press the Tv button on the Airtel Remote First

    Then Power Button on the TV Remote

    The Airtel Remote LED will blink 2 times to indicate successful


    Learning
    Now Press The Mute Button on the Airtel Remote

    Now do the Same on the TV Remote

    The Airtel Remote LED will again blink 2 times to indicate successful
    Learning
    Now press the AV Button on the Airtel Remote
    (Note you can select the default input in yout TV so this is an optional
    programming option)
    Press A/V Button on your TV Remote

    Now press Volume Up(+) Key on your Airtel Remote


    Then Volume (+) on the TV Remote
    The Airtel Remote LED will again blink 2 times to indicate successful
    Learning
    Now press Volume Down(-) Key on your Airtel Remote
    Then the volume (-) key on the TV Remote
    The Airtel Remote LED will again blink 2 times to indicate successful
    Learning
    Now again press OK it is programmed
    +2 and it is programmed
    NOTE : Not all TV Remotes may be programmed
    Hope the method works your comments are welcome !

    Press OK + Red Button for 2 seconds and when the LED to flash 2
    times , then press 9 , 8 ,0 one after another . Your remote is reset now
    follow the above steps except for the TV Volume

    There are 5 basic functions which your new Airtel remote needs to learn
    about your TV
    1. TV Power code
    2. TV Mute code
    3. AV code
    4. TV VOL + code
    5. TV VOL code
    Step 1: Bring Airtel digital TV remote in learning mode. Press and hold
    OK + Numeric 2 key for 3 seconds. The LED blinks twice to
    indicate that your Airtel remote is ready to learn.
    Step 2 : Hold the source remote and Airtel remote in front of each other
    ( 3cm-6m apart).
    Step 3: Press & release the key (First on Airtel remote and then on
    Source remote) which needs to be programmed in Airtel remote.
    Example: Press and release the TV Power key on both remotes and
    release. The Airtel remote blinks twice to indicate a successful learning
    of TV power code.
    Step 4: Now Press & release other keys ( on both remotes
    simultaneously) : Mute , AV, Vol +/-.
    Step 5: Press OK on Airtel remote to store the new information about
    your TV. The LED will blink twice to indicate successful transfer to
    knowledge from your current TV remote to the new Airtel remote.
    If the Airtel remote blinks four times, it means the learning failed. Go to
    Step 1 again

    You might also like