Scribd
Upload
188 views1 page

Model: Rb912Uag-5Hpnd-Out Rb912Uag-2Hpnd-Out

The RB912 is available in an outdoor enclosure fitted with SMA connectors for antennas and a cable hood for moisture protection. It has additional places for up to 3 more antenna connectors if the miniPCIe slot is used for another wireless interface, making it dual band. The case can be opened with one hand and is protected against environmental elements, with ports located behind a protective door. It includes a mounting loop for towers/poles and a separate DIN rail mount, along with a PoE injector and power supply unit.

Uploaded by

sederapjps
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
188 views1 page

Model: Rb912Uag-5Hpnd-Out Rb912Uag-2Hpnd-Out

The RB912 is available in an outdoor enclosure fitted with SMA connectors for antennas and a cable hood for moisture protection. It has additional places for up to 3 more antenna connectors if the miniPCIe slot is used for another wireless interface, making it dual band. The case can be opened with one hand and is protected against environmental elements, with ports located behind a protective door. It includes a mounting loop for towers/poles and a separate DIN rail mount, along with a PoE injector and power supply unit.

Uploaded by

sederapjps
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RB912 outdoor

The RB912 is also available in an outdoor enclosure, fit with two SMA
connectors for antennas, and a cable hood for protection against
moisture. Also available are three additional places for antenna
connectors, in case you wish to use the RB912 miniPCIe slot for one
more wireless interface to make a dual band device.
The case can be opened with one hand, and is protected against the
elements. USB, Ethernet and a Grounding wire exits are provided on the
bottom, behind a protective door.
Comes with a mounting loop for tower/pole mounting, and a separate
DIN rail mount is also provided. Package also includes a PoE injector
and power supply unit.
Model
Features
CPU
Memory
Ethernet
Wireless
Extras
Expansion
Power options
Dimensions
Max consumption
OS
Kit includes

RB912UAG-5HPnD-OUT

RB912UAG-2HPnD-OUT

Built in 5GHz 802.11a/n,


2x RP-SMA connectors

Built in 2GHz 802.11b/g/n,


2x RP-SMA connectors

1 Ethernet, 1 miniPCIe, USB, Additional memory,


Gigabit, High power, Dual chain, Outdoor case
Atheros AR9342 600MHz network processor
64MB DDR2 onboard memory
One Gigabit port with Auto-MDI/X

beeper, signal and status LEDs, SIM slot (requires 3g miniPCIe card),
voltage and temperature sensors
miniPCIe slot for 802.11 or 3G (using 3G disables the USB port), USB 2.0 port
PoE: 8-30V DC on Ether1 (Non 802.3af).
246x135x50mm; Weight: 390g
14W at 24V
MikroTik RouterOS, Level4 license (supports wireless AP mode)
RB912 outdoor unit, PSU, PoE injector, mounting loop, DIN rail mount
RB912UAG-5HPnD-OUT

RB912UAG-2HPnD-OUT

TX/RX at MCS0

30dBm / -96dBm

30dBm / -96dBm

TX/RX at MCS7

24dBm / -78dBm

24dBm / -78dBm

TX/RX at 6Mbit

30dBm / -96dBm

30dBm / -96dBm

TX/RX at 54Mbit

27dBm / -80dBm

27dBm / -80dBm

Frequency range

4900-5920MHz

2400MHz-2500MHz

You might also like