Scribd
Upload
126 views

Keyboard Basics

A keyboard contains a microprocessor that monitors the key matrix and sends character data to the computer. It analyzes which keys are pressed on the matrix and looks up the corresponding characters in its memory to transmit the appropriate character or symbol through the keyboard cable and connector to the computer's keyboard controller and operating system. The operating system then directs the keyboard input to either system-level commands, current application commands, or character entry based on the context.

Uploaded by

sanjay sharma
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
126 views

Keyboard Basics

A keyboard contains a microprocessor that monitors the key matrix and sends character data to the computer. It analyzes which keys are pressed on the matrix and looks up the corresponding characters in its memory to transmit the appropriate character or symbol through the keyboard cable and connector to the computer's keyboard controller and operating system. The operating system then directs the keyboard input to either system-level commands, current application commands, or character entry based on the context.

Uploaded by

sanjay sharma
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 8

Did you know that the keyboard on a typical computer system

is actually a computer itself?

Your basic Windows keyboard

At its essence, a keyboard is a series of switches connected


to a microprocessor that monitors the state of each switch
and initiates a specific response to a change in that state.

Types of Keyboards
101-key Enhanced keyboard
104-key Windows keyboard
82-key Apple standard keyboard
108-key Apple Extended keyboard

Types of Keys
Typing keys
Numeric keypad
Function keys
Control keys

Control keys provided cursor and screen control.


Four keys arranged in an inverted T formation
between the typing keys and numeric keypad
allow the user to move the cursor on the display
in small increments. The control keys allow the
user to make large jumps in most applications.
Common control keys include:
Home
End
Insert
Delete
Page UP
Page Down
Control(Ctrl)
Alternat(Alt) Escape(ESC)

Inside the Keyboard


The processor in a keyboard has to understand
several things that are important to the utility of the
keyboard, such as:
The amount of bounce and how to filter it.
The speed at which to transmit the typematics.
Position of the key in the key matrix.

The microprocessor and


controller circuitry of a
keyboard.

The key matrix is the grid of circuits underneath the keys. In all keyboards except for
capacitive ones, each circuit is broken at the point below a specific key. Pressing the
key bridges the gap in the circuit, allowing a tiny amount of current to flow through.
The processor monitors the key matrix for signs of continuity at any point on the grid.
When it finds a circuit that is closed, it compares the location of that circuit on the key
matrix to the character map in its ROM. The character map is basically a
comparison chart for the processor that tells it what the key at x,y coordinates in the
key matrix represents. If more than one key is pressed at the same time, the
processor checks to see if that combination of keys has a designation in the
character map. For example, pressing the a key by itself would result in a small letter
"a" being sent to the computer. If you press and hold down the Shift key while
pressing the a key, the processor compares that combination with the character map
and produces a capital letter "A."

A look at the key matrix.

From the Keyboard to the Computer


As you type, the processor in the keyboard is analyzing the key matrix
and determining what characters to send to the computer. It maintains
these characters in a buffer of memory that is usually about 16 bytes
large. It then sends the data in a stream to the computer via some type
of connection.

A PS/2 type keyboard connector.

The most common keyboard connectors are:


5-pin DIN (Deustche Industrie Norm) connector
6-pin IBM PS/2 mini-DIN connector
4-pin USB (Universal Serial Bus) connector
internal connector (for laptops)

Normal DIN connectors are rarely used anymore. Most


computers use the mini-DIN PS/2 connector; but an
increasing number of new systems are dropping the PS/2
connectors in favor of USB. No matter which type of
connector is used, two principal elements are sent through
the connecting cable. The first is power for the keyboard.
Keyboards require a small amount of power, typically about
5 volts, in order to function. The cable also carries the data
from the keyboard to the computer.

The other end of the cable connects to a port that is


monitored by the computer's keyboard controller. This is
an integrated circuit (IC) whose job is to process all of the
data that comes from the keyboard and forward it to the
operating system. When the operating system is notified that
there is data from the keyboard, a number of things can
happen:
It checks to see if the keyboard data is a system level command. A good
example of this is Ctrl-Alt-Delete on a Windows computer, which initiates a
reboot.
The operating system then passes the keyboard data on to the current
application.
The current application understands the keyboard data as an application-level
command. An example of this would be Alt - f, which opens the File menu in a
Windows application.
The current application is able to accept keyboard data as content for the
application (anything from typing a document to entering a URL to performing a
calculation), or
The current application does not accept keyboard data and therefore ignores the
information.

You might also like