Scribd
Upload
337 views2 pages

Tutorial Atoll

The document provides steps to set up a network simulation project in Tutorial Atoll software: 1) Import necessary files like clutter classes, height data, and vector maps. 2) Set the projection and display settings. 3) Draw filtering zones for the desired area. 4) Create a new transmitter network setting with example parameters like 2600 MHz frequency band and 5 MHz bandwidth. 5) Add a propagation model and settings to each transmitter template.

Uploaded by

Jennie Smith
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
337 views2 pages

Tutorial Atoll

The document provides steps to set up a network simulation project in Tutorial Atoll software: 1) Import necessary files like clutter classes, height data, and vector maps. 2) Set the projection and display settings. 3) Draw filtering zones for the desired area. 4) Create a new transmitter network setting with example parameters like 2600 MHz frequency band and 5 MHz bandwidth. 5) Add a propagation model and settings to each transmitter template.

Uploaded by

Jennie Smith
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Tutorial Atoll

File -> New -> From a Document Template -> Project templates
-> Ok.
File -> Import -> Clutter -> Open -> Index -> Open Clutter
Classes -> Ok.
File -> Import -> Height -> DTM -> Index -> Open -> Altitudes
-> Ok.
File -> Import -> Vectors -> Index -> Open -> Vectors -> Ok.
Tools -> Options -> Projection -> Favorite (Asia-Pacific) ->
Batavia (Jakarta)/NE -> Ok -> Display Batavia (Jakarta)
Ok.

->

Geo -> Zones -> Filtering Zone -> Draw -> Tentukan
daerahnya.
Data -> Transmitter -> Klik kanan -> Networksetting ->
Frequency -> Bands -> Buat project baru.
Misal F = 2600 Mhz, Bandwidth = 5 MHz, (example name
2600 MHz).
10 MHz -> Dense Urban -> Manage template -> Add
Name : example 2600 MHz, Hexagon = 630 M model
(Bebas), Propagation model (Cost-Hata) -> Radius =
4000 M.
Tab LTE -> Power : 47 dBm -> Freq band (example 2600 MHz)
-> Channel number : 8 -> User = 291296 -> Ok.
Apply example -> Ok.
Dense urban diganti menjadi -> example 2600
Klik yang ada warna (merah, biru, kuning) -> tarik garis.
Transmiter -> klik kanan -> properties -> display type ->
Automatic -> Ok.

Prediction -> klik kanan -> new -> pilih overlaping zones -> ok
-> ok.
Prediction -> klik kanan -> coverage signal level -> ok.
Prediction -> coverage by transmitter -> ok.
Prediction -> klik anan -> calculate -> yes -> save
#Dari daerah itu terdapat 21 BTS, 1 BTS = 291296 User.

You might also like