Scribd
Upload
980 views

Snagging List: ISSUE: 02 DATE: 01.11.2012 REV.: 01 Form No.

The document is a snagging list for Villa Z1-TH-20, identifying 22 issues needing correction, such as paint on external surfaces, gaps around panels, non-aligned switches and sockets, missing labels and covers, and gaps around AC units and detectors requiring sealant. It provides the inspection date, villa and room details, issues noted by number and description, and spaces to note dates of re-inspection and sign-off.

Uploaded by

sujan1980
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
980 views

Snagging List: ISSUE: 02 DATE: 01.11.2012 REV.: 01 Form No.

The document is a snagging list for Villa Z1-TH-20, identifying 22 issues needing correction, such as paint on external surfaces, gaps around panels, non-aligned switches and sockets, missing labels and covers, and gaps around AC units and detectors requiring sealant. It provides the inspection date, villa and room details, issues noted by number and description, and spaces to note dates of re-inspection and sign-off.

Uploaded by

sujan1980
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Description:

Snagging List
ISSUE: 02

DATE: 01.11.2012

REV.: 01

FORM NO.:

PROJECT :--

Snag Item Listing


Sub Contractor :
Work Designation: Villa Z1-TH-20
Zone

ZONE-01

Level

GROUND FLOOR

Inspection Date

Villa No

Z1-TH-20

Room

ALL

Inspected By

No.

3-JAN-2016

Description

Paint found on the external surface of the manual pull station .

Sealant not provided around the DB,12 U cabinet and fire alarm control panel hence small Gap
found on the edge of the panels.

Courtyard light switch not aligned in entrance area.

Sealant not provided around the manual pull station in the entrance area.

Dummy circular covers not provided for the light points.

Identification labels not provided for the power socket and lighting.

Catv and power socket are not align in dining room.

AC unit not flush with the wall in dining room.

Installed Water heater dummy cover was not approved by the consultant .

10

Light switch inside the bedroom 4 was not aligned.

With / Without RE:


Page :

Re-inspected

Closed Out

Closed Out
Consultant

Date

11

Sealant not provided on the bottom of the AC unit in bedroom-04

12

Small gaps found near the edge of all smoke detector.so sealant to be provided around the
detector

13

Ac unit not flush with the wall. sealant to be provided around the units in bedroom-03.

14

Catv & power socket not aligned in bedroom-03.

15

3 gang and water heater dummy cover not in straight line.

16

Sealant not provided around the junction box inside bedroom toilet-02

17

Single power socket not in aligned inside the master bedroom.

18

Angle valve cover not fixed inside the kitchen.

19

Washing machine outlet not in align and protected.

20

Cooker outlet not covered and protected.

21

power socket and Telephone outlet dummy cover are not in aligned.

22

Sealant not provided around the power socket inside the driver room

Anticipated Re-inspection Date:

You might also like