Scribd Logo
Upload

Welcome to Scribd!

  • 110 views

    Hydroulik Roll Crusher

    Uploaded by

    TIRIANTO
    The document provides information on process evaluation and calculations for a clinker grinding mill and hydraulic roll press. Key parameters listed for the roll press include a throughput of 318.7 t/h, press force of 6485.9 kN, specific press force of 4409.3 kN/m2, absorbed motor power of 293.9 kW, and specific energy consumption of 1.8 kWh/ton. Formulas are provided to calculate the press force, specific press force, specific surface load, and absorbed motor power based on the throughput and other parameter values.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Hydroulik Roll Crusher

    Uploaded by

    TIRIANTO
    110 views15 pages
    The document provides information on process evaluation and calculations for a clinker grinding mill and hydraulic roll press. Key parameters listed for the roll press include a throughput of 318.7 t/h, press force of 6485.9 kN, specific press force of 4409.3 kN/m2, absorbed motor power of 293.9 kW, and specific energy consumption of 1.8 kWh/ton. Formulas are provided to calculate the press force, specific press force, specific surface load, and absorbed motor power based on the throughput and other parameter values.

    Original Description:

    Calculation

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information on process evaluation and calculations for a clinker grinding mill and hydraulic roll press. Key parameters listed for the roll press include a throughput of 318.7 t/h, press force of 6485.9 kN, specific press force of 4409.3 kN/m2, absorbed motor power of 293.9 kW, and specific energy consumption of 1.8 kWh/ton. Formulas are provided to calculate the press force, specific press force, specific surface load, and absorbed motor power based on the throughput and other parameter values.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    110 views15 pages

    Hydroulik Roll Crusher

    Uploaded by

    TIRIANTO
    The document provides information on process evaluation and calculations for a clinker grinding mill and hydraulic roll press. Key parameters listed for the roll press include a throughput of 318.7 t/h, press force of 6485.9 kN, specific press force of 4409.3 kN/m2, absorbed motor power of 293.9 kW, and specific energy consumption of 1.8 kWh/ton. Formulas are provided to calculate the press force, specific press force, specific surface load, and absorbed motor power based on the throughput and other parameter values.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 15

    EVALUASI PROSES

    HRC
    D
    w
    rpm
    s

    PERHITU

    1524 mm
    965.2 mm
    20 rpm
    23.94 mm

    Hydrolic
    d
    z
    p

    Feed Clinker dari HRC ke Mill


    Fresh Feed
    Clinker Factor
    Feed BC3
    Efficiency gear & motor

    200 Ton/jam
    80 %
    160 Ton/jam

    0.9

    PARAMETER
    Press Throughput (t/h)
    Roller Speed (Vu)
    u (Circulating Load)
    Press Force (kN)
    Specific Press Force (kN/m2)
    Specific Surface Load
    Absorbed Motor Power (KW)
    Specific Energy Consumption (kwh/ton)
    Density (ton/m3)
    Relatife Flake Thickeness (%)

    Press Throughput (t/h)

    M =

    Press Force (kN)

    Clinker Properties

    G
    0

    318.7 t/h

    NILAI
    318.7
    1.60
    1.99
    6485.9
    4409.3
    172.5
    293.91631
    1.8
    1.57

    6485.9 kN

    Specific Press Force (kN/m2)

    ---->

    4409.3 (kN/m2)

    Specific Surface Load

    ---->

    172.53598 N/mm2

    Absorbed Motor Power (KW)

    293.9 KW

    Specific Energy Consumption (kwh/ton)

    Spesific Press Force (kN/m2)


    Relative flake tickness (% of D)
    Density of Pressed material (t/m3)
    Roller Press Velocity

    6000 kN/m2

    <250 N/mm2

    Spesific PreSpesific Press Force ( Spesific PreSpesific Press Force (kN/m2)


    Relative fla Relative flake tickness Relative fla Relative flake tickness (% of D)
    Density of PDensity of Pressed mate
    Density of PDensity of Pressed material (t/m3)
    Roller PressRoller Press Velocity Roller PressRoller Press Velocity

    283576257

    PERHITUNGAN HRC

    508 mm
    4
    80 bar

    inker Properties
    9.2 (6.9-9.2)
    2.3 (2.3-2.85)
    2.4 t/m3
    3.2 mm

    STANDART
    HOLDERBANK

    FLS

    1 - 1.55
    Lihat Grafik

    1.3 - 1.6

    6000
    < 250

    6000

    2.5 - 3
    2.4 - 2.5

    2.2 - 2.7
    1.8 - 2.3

    6
    14

    35.650707
    14.035712
    355.6

    d
    z
    p
    D
    W

    in
    in

    Diameter Hydraulic Cylinder (mm)


    Jumlah hydraulic Cylinder (-)
    Hydraulic Pressure (bar)
    Diameter Roll (mm)
    Lebar Roll (mm)

    508 mm
    4
    bar
    1524 mm
    965.2 mm

    Parameter
    Degree ()
    Tinggi (mm)

    2.3
    61.2

    2.85
    75.9

    6.9
    9.2
    184.4 - 246.8

    You might also like