Scribd
Upload
381 views1 page

SFOL Matrix GD&T

This document compares the geometric attributes of size, form, orientation, location, and runout to Y14.5-2009 dimensioning and tolerancing tools. It shows which tools always, sometimes, or never control each attribute. For example, size always controls size but does not control other attributes like orientation or location. A datum reference is required for some tools like profile dimensions but not for others like when a dimension is applied to a single surface.

Uploaded by

Jesus Gallardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
381 views1 page

SFOL Matrix GD&T

This document compares the geometric attributes of size, form, orientation, location, and runout to Y14.5-2009 dimensioning and tolerancing tools. It shows which tools always, sometimes, or never control each attribute. For example, size always controls size but does not control other attributes like orientation or location. A datum reference is required for some tools like profile dimensions but not for others like when a dimension is applied to a single surface.

Uploaded by

Jesus Gallardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Matrix'of'Geometric'A/ributes'vs.'Y14.

592009'Tools
Geometric)A+ributes)
No)datum)references)required)

Size)

Form)
Rule)#1:))
Any)feature)of)size)
" (ISO)requires)
Envelope)modier))

"

Always))
controls)size)

Orienta:on)

Loca:on)

Rule)#1:)Parallelism)

" of)two)opposed)
parallel)planes)

Size)does)not)
Does)not)control)
Independency)
"
control)any)other)
loca:on)
Modier)
type)of)orienta:on;)
" (ISO)default);)or)
" does)not)control)
parallelism)of)two)
whenever)Rule)#1)
parallel)planes)
does)not)apply)

Runout)

Loca:on)

Orienta:on)

Form)

without)Rule)#1)

"

Does)not))
control)size)

"

Always)controls)
form)

"

Does)not)control)
orienta:on)

"

Does)not)control)
loca:on)

"

Always)controls)
orienta:on)

"

Does)not)control)
loca:on)

"

Always)controls)
orienta:on)

"

Always)controls)
loca:on)

When)applied)to)
" a)at)surface)
!

"

"

Does)not))
control)size)

Does)not))
control)size)

Does)not))
control)size)

(and)no)Tangent)Plane)
Only)Modier)used))

When)applied)to)FOS)
(or)to)a)at)surface)
" with)Tangent)Plane)
Only))Modier))

Does)not)control)
form)(although)
" may)control)
balance))

"

Always)controls)
form))

Always)controls)
orienta:on))
" (or)at)least)
wobble))

Controls)coaxiality)

" when)applied)to)a)

surface)of)revolu:on)
When)applied)to)a)

" surface)that)is)90)to)
the)datum)axis)

"

With)all)around/
over)(or)with)
datum)reference)
AND)basic)distance)
to)datum))

"

Without)all)
around/over)(and)
without)datum)
reference)AND)
basic)distance)to)
datum))

Prole)

ASME)Y14.5C2009)Dimensioning)&)Tolerancing)Tools))

Size)

Datum)references)required)

2014 Stolter, LLC

" Almost)always)

With)datum)
reference)(or)when)
" applied)to)mul:ple)
or)some)complex)
surfaces))

With)datum)
reference))
" AND)basic)
distance)to)datum)

Maybe)not)(If)
Tangent)Plane))
" Only)Modier)is)
used))

Without)datum)
reference)(or)
" when)applied)to)
single)or)simple)
surfaces))

Without)datum)
reference)OR)
" basic)distance)to)
datum)
www.gd-t.com

You might also like