Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    Supplementary Questions - Transmission 1. (2007/2008/3 Main Q3)

    Uploaded by

    Ong Teck Chong
    The planetary gear train has a sun gear with 16 teeth that is fixed, a carrier serving as the input rotating at 1800 rpm clockwise, a planet gear meshing with the sun and carrier having 32 teeth, and an output ring gear with 80 teeth. When the carrier rotates at 1800 rpm clockwise, the planet gear rotates at 2700 rpm clockwise and the ring gear rotates at 2160 rpm clockwise, while the sun gear does not rotate.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Supplementary Questions - Transmission 1. (2007/2008/3 Main Q3)

    Uploaded by

    Ong Teck Chong
    17 views1 page
    The planetary gear train has a sun gear with 16 teeth that is fixed, a carrier serving as the input rotating at 1800 rpm clockwise, a planet gear meshing with the sun and carrier having 32 teeth, and an output ring gear with 80 teeth. When the carrier rotates at 1800 rpm clockwise, the planet gear rotates at 2700 rpm clockwise and the ring gear rotates at 2160 rpm clockwise, while the sun gear does not rotate.

    Original Description:

    free

    Original Title

    Transmission 2 P1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The planetary gear train has a sun gear with 16 teeth that is fixed, a carrier serving as the input rotating at 1800 rpm clockwise, a planet gear meshing with the sun and carrier having 32 teeth, and an output ring gear with 80 teeth. When the carrier rotates at 1800 rpm clockwise, the planet gear rotates at 2700 rpm clockwise and the ring gear rotates at 2160 rpm clockwise, while the sun gear does not rotate.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    17 views1 page

    Supplementary Questions - Transmission 1. (2007/2008/3 Main Q3)

    Uploaded by

    Ong Teck Chong
    The planetary gear train has a sun gear with 16 teeth that is fixed, a carrier serving as the input rotating at 1800 rpm clockwise, a planet gear meshing with the sun and carrier having 32 teeth, and an output ring gear with 80 teeth. When the carrier rotates at 1800 rpm clockwise, the planet gear rotates at 2700 rpm clockwise and the ring gear rotates at 2160 rpm clockwise, while the sun gear does not rotate.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    SUPPLEMENTARY QUESTIONS - TRANSMISSION

    1. (2007/2008/3 Main Q3)


    A planetary gear train is shown in figure. The carrier (link 2) serves as the input to
    the train. The sun (gear 1) is fixed and has 16 teeth and the planet gear (gear 3) has
    32 teeth. The ring (gear 4) serves as the output from the train and has 80 teeth.
    Determine the rotational velocity of all members of this gear train when the input
    shaft rotates at 1800 rpm clockwise.
    (Ans: sun = 0 rpm, planet = 2700 rpm CW, ring = 2160 rpm CW)

    3
    2
    1

    You might also like