Denyo Generator

SOUNDPROOF DIESEL GENERATING SETS
DENYO POWER GENERATORS are

partners of our civil life
Denyo power generators are capable of generat-
ing power in various situations where public power

supply is not available.
They contribute to build
infrastructure of society and are highly appreciated

by customers all over the world.In a variety of situations like civil engineering works and construction
works to build infrastructure of our society.
Denyo engine power generators are capable of providing power at various sites where power is
required like civil work and construction sites as
well as are also employed in various facilities as
emergency power source for critical equipment like medical equipment in
hospital, bank online system and traffic signals etc.
As the power source in the areawhere electricity is

unavaiable.
As the power source in the construction site.
GENERAL CONSTRUCTION
The DCA Series generators are complete, stand alone generating

sets. All models consist of a Denyo alternator which is directly
coupled to a diesel engine. The alternator and engine are set on a
common skid base. Special vibration isolators are used to
minimise vibrations during operation.
The generator and electrical
components are fully enclosed
in a solid-steel,weatherproof
bonnet.
Noisesuppression is achieved
using highly effective sound

insulating materials.
1
As the Emergency power source in the hospital.
PERFORMANCE
FEATURES
HIGH-PERFORMANCE
The Denyo generating system

guarantees the following levels
of performance:
TEMPERATURE RISE : 100 temperature rise at 40 ambientJEC2130.
INSULATION : ClassFJEC2130.
VOLTAGE REGULATION : Within0.5%
except DCA-400SP, 400ES
FREQUENCY REGULATION: Within 5.0%

through noload to full-load.
VOLTAGE WAVEFORM : Deviation Factor
of open-circuit terminal voltage does not
exceed 0.06.
Telephone Influence FactorTIFis less
than 50.
ELECTROMAGNETIC INTERFERENCE
LEVEL : Attenuated to meet most commercial requirements.
INSULATION RESISTANCE : Higher than
3 Mega-ohms, measured between
a r m a t u r e w i n d i n g s a n d e a r t h, f i e l d
windings and earth, field control circuit
and earth.
The innovative excitation system* fitted
on all models, in conjunction with the AVR
and advance d br ushle s s ge ne rator,
p r ov i d e s f a s t vo l t a g e r e g u l a t i o n i n
response to load variations, enabling use
soon after start up. This system provides
output stability during load variations.
*U.S.Patent No.4268788
Synchronous brushless alternator for

minimal wear.
Designed to function in all climatic
conditions.
Will safely power the most sensitive

loads, such as thyristors, invertors and
computer systems, without the risk of
damage to these loads, thanks to the high
level electrical characteristics of the
generator's output.
ECONOMICAL
PERFORMANCE
Easy starting and quick response.

Utilising highly reliable diesel engines
with low fuel consumption, manufactured
by Japan's leading engine manufacturers.
Uninterrupted generator operation for up
to 12 hours under 75% load.
UNSURPASSED
FLEXIBILITY
To meet today's varying needs

successfully, your equipment
must be as flexible as you are.
The Denyo DCA Series generator range provides you with
the flexibilit y to get the job
done simply and economically,
without any delays.
TRUE HEAVY-DUTY PERFORMANCE
For a particular job, you may need that
extra power from your generator. With
the DCA Series, the standby power
rating110% or 105% load except DCA610SPMcan be used continuously for 1
hou r in eve r y 8 hou r s of c o ntinu ou s
operation.This ex tra power per formance of Denyo generators means you
can get the job done, without the
inconvenience of using another generator.
PARALLEL OPERATION FEATURE

( except for DCA-100 below )
From time to time, at a construction site,

mine site or in other situations, a large
temporary power supply is required for a
particular job. To meet this requirement
Denyo's DCA Series generators incorporate a built-in parallel operation drive
system, allowing you to create a largecapacity generating plant on-site, without
the need to procure any other equipment.
DUAL VOLTAGE SYSTEM
optional for DCA-25USI2, 45ESH, 45USI2, 60ESH,
60USH
F o r c o m p a n i e s t h a t o p e r a t e i n t e rnationally or have motors that require

power at different voltages, a different
generator is usually required for each
voltage setting. However, the DCA Series
ge ne r ator s a re e quipp e d with a dual
voltage system, so one generator can be
u s e d to p owe r m oto r s w i th di f fe re n t
voltage settings. An extremely convenient
feature.
ALL MODELS CAN RUN AT 50Hz/60Hz
Simply adjust the engine speed on the
control panel to use a DCA Series generator at either 50 Hz or 60 Hz.
EXTREMELY QUIET OPERATION
In urban areas and at the worksite, there is
an ever increasing demand for reduced
noise pollution. In response to these
concerns, Denyo has pioneered a
soundproof and super soundproof range of
generators. The DCA Series generators are
extremely quiet when operating at full load,
even though all soundproof models are
compactly designed. Check the
specifications for the sound level of each
model.
DENYO GENERATORS:
DESIGNED TO BE
TOTALLY
USER-FRIENDLY
MAINTENANCE MADE SIMPLER
A ll da ily m a inte na nc e re quire me nts c a n b e
performed from one side of the machine. The large
doors gives you full acces to the engine.
External drain plugs for oil, fuel and water are fitted
for convenience in performing routine maintenance.
Large fuel gauge is fitted for simple viewing.
For major engine overhauls, the bonnet can be
simply unbolted, which allows full access to the
engine.
FULLY APPOINTED CONTROL PANELS

FOR EASE OF USE AND MONITORING GENERATOR PERFORMANCE.
Tachometer
AC Ammeter
AC Volt meter
Pilot Lamp
Voltmeter Change-Over Switch
Panel Light
Synchroniziang Lamp
Single Parallel Change-Over Switch
Cir- cuit Breaker
Panel Light Switch
Ammeter Change-Over Switch
Voltage Regulator
Fre- quency Meter
Throttle Handle
Preheat Lamp
Battery Switch
Emergency Stop Button
Starter Switcr
Warning Lamp Unit
Charging Ammeter
Oil
Pressure Gauge
Water
temperature Gauge
TRANSPORTABILITY
The new designs of the DCA Series range have
achieved significant size and weight reductions over
previously producted models, through improvements in coupling techniques and alternator design.
T he s tu rd y we athe r p ro of s te e l b onnet o n a
heavy-duty steel skid base allows easy handling by a
forklift.
Provision of Various Protective Devices and

Warning Lamps
A circuit breaker is provided to protect the generator from
shorting of the load circuit or an overload.
The balance point lifting hook (lug) fitted on the

roof of each machine facilitates easy transportation
using a crane.
An emergency stop device is provided to automatically

detect an engine malfunction and shut down the unit, as well
as a warning lamp.
A l l m o d e l s a r e m o d u l a r d e s i g n e d , s o t h a t
generators can be stacked, thereby making the best
use of your valuable storage area.
Operation
Display
Engine Stop
Load Interrupt
Malfunction Display
Low oil pressure
High water temperature
Over-current
Electric leakage
Insufficient charging
Low fuel level
Plugging of air cleaner
Rise in fuel filter level
Over-speed
Item
O: Operates :Does not operate
1 Only for 13 to 35.Engine stopped/malfunction display not provided

for 25ESI,45 150ESH, US series.
2 Excluding 13 20LS,25ESK.
3 Only for 25ESI,45ESI,25USI2,45USI2.
4 Only for 60ESI2,600SPK,800SPK,800SPM,1100SPM,1100SPC.
5 Only for 60ESI2
SPECIFICATION TABLE13kVA45kVA CLASS SOUNDPROOF TYPE

DCA-13LSK DCA-13LSY DCA-15LSK DCA-20LSK DCA-25ESK DCA-25ESI DCA-35SPK DCA-45ESI DCA-45ESH
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
10.5
13
10.5
13
12.5
15
17
20
20
25
20
25
30
35
37
45
37
45
11
13.7
11.5
14
13.8
16.5
18.7
22
22
27.5
22
27.5
31.5
36.75
38.9
47.3
38.9
47.3
60
3-Phase,4-Wire
or Single Voltage
or
Single Voltage
Single Voltage Dual VoltageDual Voltage is an option
Dual Voltage
0.8Lagging
Within 0.5
Brushless,Rotating Exciter
With A.V.R.
Class F
Yanmar
Kubota
3TNV84-G
D1403-K3A
Inlined,
Inlined,
Swirl Chambered Direct Injected
Class H
Class F
Isuzu
Isuzu
Kubota
Hino
BB-4JG1T
AA-4LE2
V3300-EB
W04D-K
Inlined,
Inlined,
Inlined,Direct Injected,
Inlined,
Inlined,Swirl Chambered
Direct Injected Swirl Chambered
Turbocharged
Direct Injected
13.7/1500 16.9/1800 15.3/1500 18.3/1800 16.9/1500 20/1800 21.5/1500 25.6/1800 25/1500 32.2/1800 26/1500 32/1800 38.5/1500 44.1/1800 46.5/1500 56/1800 46.5/1500 57/1800
Kubota
D1703-K3A
Kubota
V2203-K3A
Kubota
V2203-KB
10.2/1500 12.4/1800 11.3/1500 13.5/1800 12.4/1500 14.7/1800 15.8/1500 18.8/1800 18.4/1500 23.71800 19.1/1500 23.5/1800 28.3/1500 32.4/1800 34.2/1500 41.2/1800 34.2/1500 41.9/1800
3-8092.4
3-8490
4-8792.4
4-8596
3-8792.4
4-98110
4-8792.4
4-104118
4-95.4107
1.393
1.496
1.647
2.197
2.197
2.179
3.318
4.009
3.059
ASTM No. 2 Diesel Fuel or Equivalent

2.4
2.9
2.1
2.6
2.8
3.4
5.6
6.7
5.6
6.4
3.9
6.4
3.6
4.3
3.9
4.9
3.3
4.2
5.8
6.9
7.6
7.6
8.5
13.2
7.9
7.9
6.6
10.5
62
70
82
8.0
16.5
12.2
10.9
80D26R2
100
1390
1390
1390
1540
1540
1540
1900
1900
650
650
650
650
650
680
860
880
880
900
900
900
900
900
900
990
1250
1250
503
490
516
580
591
564
890
960
1180
58
6.5
7.8
10
95D31R1
80D26R1
1 Rated Voltage Classification
6.3
50Hz
60Hz
190220V
200240V
190220V
190240V
380440V
380480V
380440V
380480V
190220V
200240V
380440V380480V
61
61
62
60
63
64
61
62
64
60
64
60
63
60
62
2 Fuel consumption is based on operation at 75% load.

3 Sound level reflects high-speed no-load operation and is calculated by averaging the measurements at four points, each 7 meters from the source.
4 Depending on location and area,output voltage may differ from values listed in catalog.
indicates options.
DCA-13LSK
DCA-20LSK
DCA-15LSK
DCA-25ESI
DCA-45ESH
2000
59
61

DCA-60ESH DCA-60ESI2 DCA-75SPI DCA-100ESI DCA-125ESM DCA-125SPK3 DCA-150ESH DCA-150ESK DCA-150ESM
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
65
75
80
100
100
125
100
125
125
150
125
150
125
150
55
66
55
66
68.3
78.8
88
110
138
110
110
3-Phase,4-Wire
138
138
165
138
165
138
165
Single Voltage
Dual Voltage is an option
Dual Voltage
0.8Lagging
Within 0.5
With A.V.R.
Class F
Class H
Class F
Hino
Komatsu
Mitsubishi
Isuzu
Mitsubishi
Komatsu
DD-6BG1T 6D16-TLE2D SA6D102E-1-A JO8C-UD SAA6D102E-2-D 6D16-TLE2D
Inlined,Direct Injected, Turbocharged, Aftercooled
Turbocharged
66/1500 78/1800 65/1500 77/1800 80/1500 93/1800 100/1500 124/1800 145/1500 166/1800 133/1500 157/1800 153/1500 183/1800 153/1500 183/1800 153/1500 183/1800
Hino
Isuzu
BB-4BG1T
W04D-TG
Turbocharged
Isuzu
A-6BG1
Inlined,Direct
Injected
48.5/1500 57.4/1800 47.9/1500 57.1/1800 58.8/1500 68.4/1800 73.6/1500 91.3/1800 107/1500 122/1800 97.8/1500 115.5/1800 113/1500 135/1800 113/1500 135/1800 113/1500 135/1800
6-114130
6-102120
6-118115
6-118115
6-102120
6-105125
4-104118
6-105125
4-105125
7.961
5.880
7.540
7.540
5.880
6.494
4.009
6.494
4.329
8.8
10.6
8.7
16.5
10.8
12.5
13.5
19.3
13.2
17.4
20.7
16.5
20.1
15.5
22.4
16
22
26.3
23.9
19.3
23.9
20.6
25.0
24.0
19.8
24.5
22
16
22.9
28.4
26
12.2
15.4
22.9
22.0
80D26R2
120E41R1
95E41R2
95D31R2
95E41R2
125
125
155
225
250
2050
2200
2630
2750
3280
3000
3200
3250
3350
880
880
1000
1050
1080
1080
1180
1080
1080
1250
1250
1300
1350
1500
1500
1500
1500
1500
1240
1120
1590
1730
2290
2120
2360
2390
2450
61
11.0
50Hz
60Hz
190220V
190240V
380440V
380480V
190220V
200240V
380440V380480V
64
61
64
61
63
59
61
61
66
63
66
61
64
62
65
62

indicates options.
DCA-100ESI
DCA-60ESI2
DCA-150ESK
DCA-125SPK3
67
DCA-220ESM DCA-220SPK3 DCA-300SPK3 DCA-400ESM DCA-400SPK II DCA-500SPK DCA-500ESM
DCA-60ESH DCA-60ESI2 DCA-75SPI DCA-100ESI DCA-125ESM DCA-125SPK3 DCA-150ESH DCA-150ESK DCA-150ESM

50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
50
60
65
75
80
100
100
125
100
125
125
150
125
150
125
150
200
220
200
220
270
300
350
400
350
400
450
500
450
500
55
66
55
66
68.3
78.8
88
110
138
110
110
3-Phase,4-Wire
138
138
165
138
165
138
165
220
242
220
242
297
330
385
440
385
440
495
550
495
550
Single Voltage
Dual Voltage is an option
3-Phase,4-Wire
Dual Voltage
0.8Lagging
Dual Voltage
0.8Lagging
Within 0.5
Within 0.5
Within 1.0
With A.V.R.
Class F
Class H
Class F
Class F
Hino
Komatsu
Mitsubishi
Isuzu
Mitsubishi
Komatsu
DD-6BG1T 6D16-TLE2D SA6D102E-1-A JO8C-UD SAA6D102E-2-D 6D16-TLE2D
Inlined,Direct Injected, Turbocharged, Aftercooled
Turbocharged
66/1500 78/1800 65/1500 77/1800 80/1500 93/1800 100/1500 124/1800 145/1500 166/1800 133/1500 157/1800 153/1500 183/1800 153/1500 183/1800 153/1500 183/1800
Komatsu
Mitsubishi
S6D125E-2-A
6D24-TLE2B
Inlined,Direct Injected, Inlined,Direct Injected,
Turbocharged
Turbocharged,Aftercooled
48.5/1500 57.4/1800 47.9/1500 57.1/1800 58.8/1500 68.4/1800 73.6/1500 91.3/1800 107/1500 122/1800 97.8/1500 115.5/1800 113/1500 135/1800 113/1500 135/1800 113/1500 135/1800
6-114130
6-102120
6-118115
6-118115
6-102120
6-105125
4-104118
6-105125
4-105125
7.961
5.880
7.540
7.540
5.880
6.494
4.009
6.494
4.329
181/1500 199/1800 178/1500 204/1800 232/1500 257/1800 309/1500 346/1800 310/1500 357/1800 382/1500 427/1800 382/1500 427/1800
6-130150
6-140165
6-135170
6-150175
6-170170
6-125150
11.940
15.240
14.600
18.560
23.150
11.040
Hino
Isuzu
BB-4BG1T
W04D-TG
Turbocharged
Isuzu
A-6BG1
Inlined,Direct
Injected
Komatsu
SA6D125E-2-A
10.6
8.7
16.5
10.8
12.5
13.5
19.3
13.2
17.4
20.7
16.5
20.1
15.5
22.4
16
22
26.3
23.9
Komatsu
SA6D140-A
Komatsu
SA6D170-B
Mitsubishi
S6A3-E2PTAA-1
246/1500 270/1800 242/1500 277/1800 316/1500 350/1800 420/1500 470/1800 421/1500 485/1800 520/1500 580/1800 519/1500 581/1800
19.3
23.9
20.6
25.0
38.1
33.7
24.0
19.8
24.5
22
16
37
22.9
28.4
26
42
12.2
15.4
22.9
22.0
80D26R2
120E41R1
95E41R2
95D31R2
95E41R2
125
125
155
225
250
2050
2200
2630
2750
3280
3000
35.7
31.5
43.6
50.0
67.4
54.8
60.8
52.1
42
62
85
74
36
37
69.4
64
69.5
83.1
67.6
78.3
119
100
92.5
114.5
3
5480
5000
3
5280
4800
190H522
145G512
490
380
3200
3250
3350
3700
3650
3750
4500
4200
880
880
1000
1050
1080
1080
1180
1080
1080
1300
1300
1400
1400
1400
1650
1650
1250
1250
1300
1350
1500
1500
1500
1500
1500
1750
1750
1800
2100
2100
2400
2400
1240
1120
1590
1730
2290
2120
2360
2390
2450
3630
3670
4160
5610
5420
8540
7920
61
11.0
Mitsubishi
S6B3-E2PTAA-3
Inlined,Direct Injected,Turbocharged,Aftercooled

8.8
Within 0.5
With A.V.R.
50Hz
60Hz
190220V
190240V
380440V
380480V
190220V
200240V
380440V380480V
64
61
64
61
63
59
61
61
66
63
66
61
64
62
65
62
67
61

50Hz
190220V
380440V
60Hz
190240V
380480V
63
63
65
68
71
65
69
67
68
68
71
65

3 Shown unit lengths are with visor.without visor
indicates options.
indicates options.
DCA-220ESM
DCA-400ESM
DCA-100ESI
DCA-60ESI2
DCA-150ESK
DCA-125SPK3
DCA-400SPK II
5
DCA-500SPK
6
69

DCA-600SPV DCA-600SPK DCA-610SPM DCA-800SPK DCA-800SPM DCA-1100SPM DCA-1100SPC
50
60
50
60
50
60
50
60
50
60
50
60
50
60
550
600
550
600
554
610
700
800
700
800
1000
1100
1000
1100
605
660
605
660
554
610
770
880
770
880
1100
1210
1100
1210
3-Phase,4-Wire
Dual Voltage
Single Voltage
0.8Lagging
Within 0.5
With A.V.R.
Class F
Class H
Komatsu
SA12V140
Komatsu
Mitsubishi
VOLVO
SA6D170A
S6R-PTA
TAD1642GE
Inlined Direct InjectedTurbocharged,Aftercooled
Mitsubish
S12H-PTA
Mitsubishi
S12A2-PTA
Cummins
QST30-G4
V12 Direct InjectedTurbocharged,Aftercooled
659/1500 723/1800 639/1500 698/1800 762/1500 768/1800 834/1500 1000/1800 830/1500 920/1800 1209.2/1500 1292.5/1800 1196/1500 1369/1800
485/1500 532/1800 470/1500 513/1800 517/1500 565/1800 613/1500 736/1800 610/1500 677/1800 890/1500 950/1800 880/1500 1007/1800
12-150175
12-140165
12-150160
6-170170
6-170180
6-144165
12-140165
37.110
30.480
33.93
23.150
24.500
16.120
30.48
81.2
91.7
93.7
81.8
93
48
82.0
96.4
102
120
103
125
119
92
151
120
112
118
170
205
190H522
154
180
154
244
234
190H524
800
490
3
51804700
3
5580
5100
3
5280
4800
3
6110
5500
3
6210
5600
3
6610
6000
3
6610
6000
1650
1650
1650
1950
1950
2350
2200
2400
2400
2400
2500
2500
2950
2790
7535
8860
8700
11200
11350
14500
12700
72
50Hz
190220V
380440V
380440V
1[PS]=735.5[w]
=735.5[kw]
60Hz
190240V
380480V
380480V
75
67
71
69
72
70
72
67
69
72
74

3 Shown unit lengths are with visor.without visor
indicates options.
DCA-800SPM
DCA-600SPV
167
144
200
DCA-1100SPC
71
75
SPECIFICATION TABLE25kVA150kV CLASS SUPER SOUNDPROOF TYPE

DCA-25USI2 DCA-45USI2 DCA-60USH2 DCA-100USI DCA-125USH DCA-150USK
50
60
50
60
50
60
50
60
50
60
50
60
20
25
37
45
50
60
80
100
100
125
125
150
22
27.5
38.9
47.3
55
66
88
110
110
138
138
165
3-Phase,4-Wire
Single VoltageDual Voltage is an option.
0.8Lagging
Dual Voltage
Within 0.5
With A.V.R.
Class F
Isuzu
AA-4LE2
Isuzu
BB-4JG1T
Inlined,
Direct Injected
Hino
W04D-TG
Isuzu
DD-6BG1T
Hino
J08C-UP
Komatsu
SAA6D102E-2-D
Turbocharged,Aftercooled
26/1500 32/1800 46.5/1500 56/1800 66/1500 78/1800 101/1500 126/1800 133/1500 156/1800 154/1500 184/1800
Inlined,Direct Injected,Turbocharged
19.1/1500 23.5/1800 34.2/1500 41.2/1800 48.5/1500 57.4/1800 74.5/1500 92.8/1800 97.8/1500 115/1800 113/1500 135/1800
4-8596
4-95.4107
2.179
3.059
3.9
3.2
6.7
2
4
60Hz
50Hz
190240V
190220V
380480V
380440V
200240V
190220V
380440V380480V
6-114130
6-102120
7.961
5.880
8.4
8.3
10.2
17.1
13.4
20.5
21.9
16.7
25.1
25.5
22
6.4
16.5
11.9
80D26R1
92
95D31R1
170
80D26R2
170
225
1400
1580
2050
2650
2950
3100
790
950
950
1100
1240
1240
1350
1550
1450
1500
1600
1600
773
1100
1330
1940
2400
2600
52
4
6-105125
4.009
6.494
10
10
8.5
4-104118
52
51
53
22.4
19.6
20
55
52
22.4
95E41R2
95D31R2
55
250
57
53
56
55

indicates options.
DCA-45USI2
DCA-60USH2
NOTE 1 OUTPUT RATING
Continuous output rating applies to operation under standard conditions as per JIS D0006.
Standby output rating applies to intermittant or emergency operation for approximately 1 hour as per JIS D0006.
KilowattskWis calculated by multiplying output kVA by 0.8.
JIS D0006:Standard air conditions Tenperature 25 Atmospheric pressure 100kPa Relative humidity 319%RH
NOTE 2 RATED VOLTAGE
Line to neutral voltage is calculated by dividing line to line voltage by 3.

Besides the voltages shown on the specification table, other voltages are available upon request.
NOTE 3
Colours of products would be different from printed ones of catalogues.
DCA-100USI
58
Options
Three-Phase/Single-Phase Output
Changeover Device
Remote Control Devices
The engine generator can be remotely changed from low speed to

high speed operation, started and stopped, and otherwise
controlled. The ability to perform these procedures automatically
or manually at the location where work is being performed when
the engine generator is separated by a considerable distance
p r ov i d e s h i g h f u e l a n d o i l s av i n g s , ex te n d s e n g i n e l i f e
substantially, and leads to a surprising level of reduction in
manpower and energy requirements. In addition, this also
minimizes noise and exhaust gas discharge levels, and in turn
helps improve the worksite environment.
For DCA-13LSK,13LSY,25ESK,25ESI,45ESH,45USI2,60ESH,60USH2
This device facilitates easy changeover between the three-phase

and single-phase output modes with the three-phase/singlephase changeover switch in the control panel. The control panel
has an output mode confirmation window and indicator lamp so
that the output mode can be confirmed at any time.
DCA-45USI2 and 60USH2 only provided with indicator lamp.
Parallel Operation Device
A variety of optional devices are available to change from manual

parallel operation to the desired type of automatic operation.
Select the desired option from the table below according to the
power supply application, site conditions and other factors.
Automatic Idling Device or Slowdown Device

Automatic Idling Device
For DCA-45 to 150, provided as standard feature for DCA-220 and above
Cannot be used with 45ESI, 45USI2
This device automates warm-up operation when the engine is

started. The addition of a remote-control box allows remote
changeover between low-speed and high-speed operation.
Please note that the engine cannot be started and stopped with
the remote-control box.
Slowdown Device
Operation
Engine
Starting /
Stopping
Synchronization
Verification/
Activation
Load
Sharing
Manual Parallel
Operation Device
Manual
Manual
Manual
Automatic Load
Sharing Device
Manual
Manual
Automatic
For DCA-150 and above
Automatic Parallel
Operation Device
Manual
Auto operation
with pushbutton
Automatic
For DCA-220 and above.

Standard feature for
DCA-1100SPM,1100SPC
Automatic
Automatic
Refer to 4 below for

applicable units.
Method
For DCA-45 to 150

Cannot be used with 45ESI,45USI2,60ESI2
In addition to a slowdown function that automatically

changes to high-speed operation when a load is applied,
and to low-speed operation when there is no load, this
device has an automatic idling function that performs
warm-up operation when the engine is startedbetween 5
and 180 seconds depending upon the room temperature
where the unit is located. Furthermore, the addition of a
remote-control box allows the engine starting/stopping and
automatic idling function as well as the slowdown function
to be operated from a remote location.
Remote ControllerFor DCA-220 to 1100
This device allows the engine starting/stopping
and automatic idling functionidling when
engine is startedto be operated from a remote
location. In addition to a switch for changeover
between high-speed and low-speed operation,
the remote-control box has a high-speed/low-speed operation
indicator lamp, a star tup warming lamp ( comes on when
generator set is not started up using normal remote controller
operation ) , and a malfunction indicator lampilluminated when
the emergency stop device is triggered.
Fully Automatic
Parallel Operation Semi-automatic
Device
Automatic
with GCP generator
controller
Remarks
Standard feature for
DCA-125 to 1100
1Manual Parallel Operation Device: Parallel operation system with unique

Denyo AVR equipped with a cross-current compensation circuitCCR system.
This is the most inexpensive system, where no addition equipment is required for
the DCA-125 and above.
2Automatic Load Sharing Device: This device operates a governor motor to
share the load uniformly among the respective generators when parallel
operation is being performed. It facilitates stable parallel operation, and
dramatically reduces the workload of monitoring during parallel operation.
3Automatic Parallel Operation Device: The troublesome synchronization
verification and synchronization activation process can be automatically
performed by simply pressing a pushbutton. After synchronization is activated,
the Automatic Load Sharing Device is capable of performing stable parallel
operation.
4Fully Automatic Parallel Operation Device: High-speed digital control enables
all operations from starting and stopping to synchronization verification,
synchronization activation and load sharing to be performed at the touch of one
button. This device has multiple functions that enable parallel operation of
generators with differing capacities, the number of units being operated to be
controlled and other operations.
Applicable models : DCA-220ESM, 400ESM, 500ESM, 610SPM, 800SPK,
provided as standard feature for DCA-800SPM.
5The generator may be classified as a normal use generator according to the
Electricity Enterprises Law depending upon the installation and operation
procedure. Consult with a sales person for details.
Note: The remote-control box for the DCA-800SPM differs from the picture.
Automatic Oil Lubrication Device
For DCA-25 to 800, provided as standard feature for DCA-500ESM, 610SPM,

800SPM and 1100SPM,1100SPC
Cannot be used with 25USI2,25ESK
Trailer
This system automatically maintains engine oil

at the proper level, making it possible to reduce
costs for oil-related maintenance, and eliminates the need to check the engine oil level.
Trailers can be fitted to generators to facilitate on-site movement.

trail-ers for DCA- 60 and below are two-wheel ;those for
DCA-75SP through 400 are four-wheel
Bolt connectors make mounting and dismounting simple.
Automatic Fuel Replenishment Device
For DCA-25ESI, 45 to 60
When the level in the unit tank drops after an extended period of
operation, a level sensor detects this and an electric pump is
operated to automatically replenish fuel in the unit tank from a
separate tank. Cannot be used with three-way valve.
Salt Corrosion Specifications
For DCA-13 to DCA-220, provided as standard feature for DCA-300 and above
These specifications are designed for when the unit will be used
on the coast or on the ocean, and include treatment to prevent
insulation resistance from dropping, and corrosion resistant
treatment of the parts.
Two-wheel type
Four-wheel type
9
Other Options
Lubricant temperature gauge

Provided as standard feature for DCA-220 and above
The following options are also available:
Overspeed protection device

Provided as standard feature for DCA-800SPK, 800SPM, 1100SPM,1100SPC
Reverse power relay

For DCA-125 and above.Provided as standard feature for DCA-800SPK,
800SPM,DCA-1100SPM,1100SPC
Keyed fuel tank cap

For DCA-13 to 1100
AC power meter
For DCA-125 and above.Provided as standard feature for DCA-800SPK,
800SPM,DCA-1100SPM,1100SPC
Mounting of muffler flange

Other options for different ranges and operating capabilities are available. Please feel
free to consult with Denyo.
* Some options may not be available depending upon the model. Confirm the details
with a Denyo sales person.
Dual-voltage specifications
For DCA-25USI2,45ESH,45USI2,60ESH,60USH2.Provided as standard feature
for DCA-25ESK,25ESI,45ESI,60ESI2,75SPI,DCA-100 to 800.Not available for
DCA-13LSK,13LSY,15LSK,20LSK,35SPK,DCA-1100SPM,1100SPC
HOW TO SELECT
A GENERATOR
Range of motor capacities that can be used with Denyo generators.

Choosing generator output according to motors and other loads is made simple by
referring to the motor capacity range and generator output in this table.
Item
Model
FrequencyHz
EG capacitykVA
Direct startup
DCA-15
DCA-13
DCA-20
DCA-25
DCA-35
DCA-45
DCA-60
50
60
50
60
50
60
50
60
50
60
50
60
50
10.5
13
12.5
15
17
20
20
25
30
35
37
45
50
60
3.4
4.1
5.4
6.3
6.3
7.6
9.4
11.6
12.3
14.9
16
20.5
60
Motor capacitykW Y- startup1
5.2
6.4
7.5
8.2
9.5
9.5
11.4
14.3
17.5
18.5
22.4
24
30.8
Y- startup2
8.3
10.2
9.6
11.9
13.1
15.7
15.7
19.5
23.1
27.7
28.2
34.3
38.4
46
Item
Model
DCA-75
DCA-100
DCA-125
DCA-150
DCA-220
DCA-300
DCA-400
FrequencyHz
50
60
50
60
50
60
50
60
50
60
50
60
50
60
EG capacitykVA
65
75
80
100
100
125
125
150
200
220
270
300
340
400
21.5
25
27.2
34.5
34.5
42.5
42.5
51
68
76
91
102
115
136
32.3
37.5
40.8
51.8
51.8
63.8
63.8
76.5
102
114
136
153
173
204
Y- startup2
48.8
58
62
68
68
97
97
115
151
172
208
231
262
308
Direct startup
Item
Model
DCA-500
FrequencyHz
50
60
EG capacitykVA
450
500
Direct startup
DCA-600/610
50
60
550/554 600/610
DCA-800
50
60
700
800
155
175
185
205
210
243
233
263
278
308
315
365
Y- startup2
351
390
432
460
508
575
Motor usage examples in the above table are benchmark values :

generator capacity will differ according to the required momentary
voltage drop, motor load factor, and size of startup capacity, as
well as motor age and efficiency.
Notes
Momentary voltage drop when a motor starts up is assumed to be within 30% of noload voltage.
Motor startup kVA is assumed to be 7kVA per 1kW.
Motor efficiency is assumed to be 85%, and load factor about 90%.
Values shown for Y- startup1and Y- startup2are open and closed, respectively; needed generator capacity differs depending on startup state.
Not appropriate for determining the capacity of emergency generating equipmentespecially disaster-prevention generating equipment.
10
SOUNDPROOF DIESEL GENERATING SETS
MGMT. SYS.
RvA C 086
No.0263-ISO 9001
ISO 9001 Certified
The Denyo trademark is widely recognized as a brand , and is a registered trademark in 90 countries
aroud the world.
Direct inquiries to the nearest Denyo distributor or to Denyo co.,Ltd.
CAT.No.FG04-14-20110704-05
Printed in japan (T)
Head office:2-8-5,Nihonbashi-horidomecho,Chuo-ku,Tokyo
103-8566,Japan
Tel:+81-3-6861-1111 Fax:+81-3-6861-1181
http://www.denyo.co.jp

Denyo Generator

Uploaded by

Copyright:

Available Formats

Denyo Generator

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Denyo Generator

Uploaded by

Copyright:

Available Formats

SOUNDPROOF DIESEL GENERATING SETS

DENYO POWER GENERATORS are

ing power in various situations where public power

They contribute to build

infrastructure of society and are highly appreciated

As the power source in the areawhere electricity is

As the power source in the construction site.

The DCA Series generators are complete, stand alone generating

using highly effective sound

As the Emergency power source in the hospital.

The Denyo generating system

FREQUENCY REGULATION: Within 5.0%

Synchronous brushless alternator for

Will safely power the most sensitive

Easy starting and quick response.

To meet today's varying needs

PARALLEL OPERATION FEATURE

From time to time, at a construction site,

F o r c o m p a n i e s t h a t o p e r a t e i n t e rnationally or have motors that require

FULLY APPOINTED CONTROL PANELS

Provision of Various Protective Devices and

The balance point lifting hook (lug) fitted on the

An emergency stop device is provided to automatically

Low oil pressure

High water temperature

Low fuel level

Plugging of air cleaner

Rise in fuel filter level

O: Operates :Does not operate

1 Only for 13 to 35.Engine stopped/malfunction display not provided

SPECIFICATION TABLE13kVA45kVA CLASS SOUNDPROOF TYPE

ASTM No. 2 Diesel Fuel or Equivalent

1 Rated Voltage Classification

2 Fuel consumption is based on operation at 75% load.

SPECIFICATION TABLE60kVA150kVA CLASS SOUNDPROOF TYPE

2 Fuel consumption is based on operation at 75% load.

SPECIFICATION TABLE200kVA500kVA CLASS SOUNDPROOF TYPE

SPECIFICATION TABLE60kVA150kVA CLASS SOUNDPROOF TYPE

DCA-220ESM DCA-220SPK3 DCA-300SPK3 DCA-400ESM DCA-400SPK II DCA-500SPK DCA-500ESM

DCA-60ESH DCA-60ESI2 DCA-75SPI DCA-100ESI DCA-125ESM DCA-125SPK3 DCA-150ESH DCA-150ESK DCA-150ESM

ASTM No. 2 Diesel Fuel or Equivalent

ASTM No. 2 Diesel Fuel or Equivalent

1 Rated Voltage Classification

2 Fuel consumption is based on operation at 75% load.

2 Fuel consumption is based on operation at 75% load.

SPECIFICATION TABLE600kVA1100kVA CLASS SOUNDPROOF TYPE

V12 Direct InjectedTurbocharged,Aftercooled

2 Fuel consumption is based on operation at 75% load.

SPECIFICATION TABLE25kVA150kV CLASS SUPER SOUNDPROOF TYPE

1 Rated Voltage Classification

2 Fuel consumption is based on operation at 75% load.

NOTE 1 OUTPUT RATING

NOTE 2 RATED VOLTAGE

Line to neutral voltage is calcu- lated by dividing line to line voltage by 3.

Remote Control Devices

The engine generator can be remotely changed from low speed to

This device facilitates easy changeover between the three-phase

Parallel Operation Device

A variety of optional devices are available to change from manual