0% found this document useful (0 votes)
40 views1 page

PIC Micro Project Board

This document contains a circuit diagram and parts list for a project board with an 8-pin or 18-pin microcontroller. The circuit includes a voltage regulator, LED, switch, and crystal oscillator. Power is supplied via a 2.1mm jack and regulated to 5V by the LM7805 voltage regulator. The microcontroller is connected to the crystal oscillator and other components including an LED for output. Capacitors are included for power filtering and the reset circuit. Resistors are used for the LED and voltage divider.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
40 views1 page

PIC Micro Project Board

This document contains a circuit diagram and parts list for a project board with an 8-pin or 18-pin microcontroller. The circuit includes a voltage regulator, LED, switch, and crystal oscillator. Power is supplied via a 2.1mm jack and regulated to 5V by the LM7805 voltage regulator. The microcontroller is connected to the crystal oscillator and other components including an LED for output. Capacitors are included for power filtering and the reset circuit. Resistors are used for the LED and voltage divider.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1

J3

LM7805
18
17

Q1
8 to 15 VDC

16
VCC

1
2
3

2.1mm

15
VCC

R2

J1

220

C6

C1

10uF

10

11
12

J4

14

15

16

17

18

RB3

RB5
RB6

RB2

U1

RB7

RB1
RB0

Vdd

Vss

OSC2

MCLR

OSC1

RA4

RA0

RA3

RA1

RA2

GND

(8)
ALTERNATE USE
(7)

(8-Pin PIC device)

(6)
(5)

Y1
1

3
3

JP1

S1

PINOUT VIEW
Looking into 9-Pin
female D-Sub

5
9
4
8
3
7
2
6
1

13
9

RB4

J2

(1)

11

D1
10

(2)

12

LED

(3)

.1uF

C2

.1uF

(4)

13

DB9F

VCC

C5

C4

22pF

22pF

R1
4.7K

VCC

2
3
4

C3

Vdd

Vss

OSC1

GP0

OSC2

GP1

GP3

GP2

8
7
6
5

.1uF
RESET

[ ] C1

Data Sync Engineering

STANDARD PARTS LIST

P.O. Box 539, Footbridge Lane, Building 3


Blairstown, NJ 07825 (908) 362-6299

Capacitor, 0.1uF, Mono Ceramic (2.5mm)

[ ] J1

Jack, 2.1mm (Mouser 163-5004)

[ ] C2

Capacitor, 10uF, 6.3V, Alum Elect (2.5mm)

[ ] Q1

Regulator, LM7805, +5V, 1A, TO-220 Case

[ ] C3

Capacitor, 0.1uF, Mono Ceramic (2.5mm)

[ ] R1

Resistor, 4.7K Ohm, 5%, 1/8W

[ ] C4

Capacitor, 22pF Ceramic Disc (2.5mm)

[ ] R2

Resistor, 220 Ohm, 5%, 1/8W

[ ] C5

Capacitor, 22pF Ceramic Disc (2.5mm)

[ ] S1

PB Switch, 6mm, (Mouser 101-TS6111T1601)

[ ] C6

Capacitor, 0.1uF, Mono Ceramic (2.5mm)

[ ] U1

IC Socket, 8-pin or 18-pin

Date

[ ] D1

LED, T1

[ ] Y1

Crystal or 3-pin resonator

12/14/2005

Project Board 18P


Sheet

Engineer

of 1

Doc. File

proj18p.sch

Rev.

You might also like