Introduction to

Engineering Drawing

TOPICS
Graphics language
Engineering drawing
Projection methods
Orthographic projection
Drawing standards

TOPICS
Traditional Drawing Tools
Lettering
Freehand Sketching

GRAPHICS
LANGUAGE

Effectiveness of Graphics Language

1. Try to write a description of
this object.
2. Test your written description
by having someone attempt
to make a sketch from your
description.
You can easily understand that

The word languages are inadequate for describing the

size, shape and features completely as well as
concisely.

Composition of Graphic Language

Graphic language in engineering application use
lines to represent the surfaces, edges and contours
of objects.
The language is known as drawing or drafting .
A drawing can be done using freehand, instruments
or computer methods.

Freehand drawing
The lines are sketched without using instruments other
than pencils and erasers.

Example

Instrument drawing
Instruments are used to draw straight lines, circles, and
curves concisely and accurately. Thus, the drawings are
usually made to scale.

Example

Computer drawing
The drawings are usually made by commercial software
such as AutoCAD, solid works etc.

Example

Engineering
Drawing

Elements of Engineering Drawing

Engineering drawing are made up of graphics language
and word language.
Graphics
language
Describe a shape
(mainly).

Word
language
Describe size, location and
specification of the object.

Basic Knowledge for Drafting

Word
language

Graphics
language
Line
types

Projection
method

Geometric
construction

Lettering

PROJECTION
METHOD

PROJECTION METHOD

Perspective

Parallel

Oblique

Axonometric

Orthographic

Multiview

PROJECTION THEORY
The projection theory is used to graphically represent
3-D objects on 2-D media (paper, computer screen).

The projection theory is based on two variables:

1) Line of sight
2) Plane of projection (image plane or picture plane)

Line of sight

is an imaginary ray of light between an

observers eye and an object.

There are 2 types of LOS : parallel and converge

Parallel projection

Perspective projection

Line of sight
Line of sight

Plane of projection is an imaginary flat plane which

the image is created.
The image is produced by connecting the points where
the LOS pierce the projection plane.
Parallel projection

Perspective projection

Plane of projection

Plane of projection

Disadvantage of
Perspective Projection
Perspective projection is not
used by engineer for manufacturing of parts, because
1) It is difficult to create.
2) It does not reveal exact
shape and size.
Width is distorted

Orthographic
Projection

MEANING
Orthographic projection is a parallel projection technique
in which the parallel lines of sight are perpendicular to the
projection plane
Object views from top

1 5

5
3
4
Projection plane

3 4

ORTHOGRAPHIC VIEW
Orthographic view depends on relative position of the object
to the line of sight.
Rotate

Two dimensions of an
object is shown.
More than one view is needed
to represent the object.

Multiview drawing
Three dimensions of an object is shown.
Axonometric drawing

Tilt

ORTHOGRAPHIC VIEW
NOTES
Orthographic projection technique can produce either
1. Multiview drawing
that each view show an object in two dimensions.
2. Axonometric drawing
that show all three dimensions of an object in one view.
Both drawing types are used in technical drawing for
communication.

Axonometric (Isometric) Drawing

Advantage

Easy to understand

Disadvantage

Shape and angle distortion

Example

Distortions of shape and size in isometric drawing

Circular hole
becomes ellipse.

Right angle becomes obtuse angle.

Multiview Drawing
Advantage

It represents accurate shape and size.

Disadvantage Require practice in writing and reading.

Example

Multiviews drawing (2-view drawing)

Drawing Standard

Introduction
Standards are set of rules that govern how technical
drawings are represented.

Drawing standards are used so that drawings convey

the same meaning to everyone who reads them.

Standard Code
Country
Thailand

Code

Full name

USA

ANSI

American National Standard Institute

Japan

JIS

Japanese Industrial Standard

UK

BS

British Standard

Australia

AS

Australian Standard

Germany

DIN

Deutsches Institut fr Normung

ISO

International Standards Organization

Partial List of Drawing Standards

Code number

Contents

. 210 2520 :
. 440 .1 2541 1
. 446 .4 2532

. 1473 2540

: http://library.tisi.go.th/data/lib_resources/pdf/catalog-online49/tis/02_ICS.pdf

Partial List of Drawing Standards

Code number

Contents

JIS Z 8311

Sizes and Format of Drawings

JIS Z 8312

Line Conventions

JIS Z 8313

Lettering

JIS Z 8314

Scales

JIS Z 8315

Projection methods

JIS Z 8316

Presentation of Views and Sections

JIS Z 8317

Dimensioning

Drawing Sheet
Trimmed paper of
a size A0 ~ A4.
Standard sheet size
(JIS)
A4
A3
A2
A1
A0

210 x 297
297 x 420
420 x 594
594 x 841
841 x 1189

(Dimensions in millimeters)

A4
A3
A2

A1

A0

Orientation of drawing sheet

1. Type X (A0~A4)
c

2. Type Y (A4 only)

d

Drawing space

c
Title block

Drawing
space

Border
lines

Sheet size
A4
A3
A2
A1
A0

c (min) d (min)
10
25
10
25
10
25
20
25
20
25

Title block

Drawing Scales
Length, size

Scale is the ratio of the linear dimension of an element

of an object shown in the drawing to the real linear
dimension of the same element of the object.
Size in drawing

Actual size

Drawing Scales
Designation of a scale consists of the word SCALE
followed by the indication of its ratio, as follow
SCALE 1:1

for full size

SCALE X:1 for enlargement scales (X > 1)

SCALE 1:X for reduction scales (X > 1)
Dimension numbers shown in the drawing are correspond
to true size of the object and they are independent of
the scale used in creating that drawing.

Basic Line Types

Types of Lines

Appearance

Name according
to application

Continuous thick line

Visible line

Continuous thin line

Dimension line
Extension line
Leader line

Dash thick line

Hidden line

Chain thin line

Center line

NOTE : We will learn other types of line in later chapters.

Meaning of Lines
Visible lines represent features that can be seen in the
current view
Hidden lines represent features that can not be seen in
the current view
Center line

represents symmetry, path of motion, centers

of circles, axis of axisymmetrical parts

Dimension and Extension lines indicate the sizes and

location of features on a drawing

Example : Line conventions in engineering drawing

Traditional
Drawing Tools

DRAWING TOOLS

DRAWING TOOLS

1. T-Square

2. Triangles

DRAWING TOOLS

2H or HB for thick line

4H for thin line

3. Adhesive Tape

4. Pencils

DRAWING TOOLS

5. Sandpaper

6. Compass

DRAWING TOOLS

7. Pencil Eraser

8. Erasing Shield

DRAWING TOOLS

9. Circle Template

10. Tissue paper

DRAWING TOOLS

11. Sharpener

12. Clean paper

ABCDEFGHIJKLMNOPQRST
UVWXYZABCDEFGHIJKLM
NOPQRSTUVWXYZABCDEF

Lettering
ABCDEFGHIJKLMNOPQRST
UVWXYZABCDEFGHIJKLM
NOPQRSTUVWXYZABCDEF

Text on Drawings
Text on engineering drawing is used :
To communicate nongraphic information.
As a substitute for graphic information, in those instance
where text can communicate the needed information
more clearly and quickly.
Thus, it must be written with
Legibility

- shape
- space between letters and words

Uniformity

- size
- line thickness

Example

Placement of the text on drawing

Dimension & Notes

Notes

Title Block

Lettering Standard
ANSI Standard

This course

Use a Gothic text style,

Use only a vertical Gothic

either inclined or vertical.

text style.

Use all capital letters.

Use both capital and

lower-case letters.

Use 3 mm for most

Same. For letters in title

text height.

block it is recommend to use

5~8 mm text height

Space between lines

N/A.

of text is at least 1/3

Follows ANSI rule.

of text height.

Basic Strokes
Straight

Slanted

Horizontal

Curved

Examples : Application of basic stroke

I letter

A letter 1

B letter 1

3
3
2

Upper-caseStrokes
letters & Sequence
Numerals
Suggested
Straight line
letters

Curved line
letters
Curved line
letters &
Numerals

Lower-case
letters
Suggested
Strokes
Sequence

The text s body height is about 2/3 the height of a capital

letter.

Stroke Sequence
I

Stroke Sequence
V

Stroke Sequence
M
K
N

Stroke Sequence
O

Stroke Sequence
U
P
D

Stroke Sequence
5

Stroke Sequence
S

Stroke Sequence
l

Stroke Sequence
w
x
k

Stroke Sequence
y
f
t

Stroke Sequence
o
a
b

Stroke Sequence
n
m
h

Word Composition
Look at the same word having different spacing between letters.
A) Non-uniform spacing

JIRAPONG
B) Uniform spacing

J IR A P O N G
Which one is easier to read ?

Word Composition

Spacing
Contour

JIRAPONG
|||| \

\ | )(

)|

|(

General conclusions are:

Space between the letters depends on the contour of
the letters at an adjacent side.
Good spacing creates approximately equal background
area between letters.

Space between Letters

1. Straight - Straight

3. Straight - Slant

2. Straight - Curve

4. Curve - Curve

Space between Letters

5. Curve - Slant

6. Slant - Slant

7. The letter L and T

slant

slant
slant

straight

Example : Good and Poor Lettering

GOOD
Not uniform in style.
Not uniform in height.
Not uniformly vertical or inclined.
Not uniform in thickness of stroke.
Area between letters not uniform.
Area between words not uniform.

Sentence Composition
Leave the space between words equal to the space
requires for writing a letter O.

Example

ALL O DIMENSIONS O ARE OIN

MILLIMETERS O UNLESS
OTHERWISE O SPECIFIED.

Freehand
Sketching

Straight Line
1. Hold the pencil naturally.
2. Spot the beginning and end points.
3. Swing the pencil back and forth between the points, barely
touching the paper until the direction is clearly established.
4. Draw the line firmly with a free and easy wrist-and-arm
motion

Horizontal line

Vertical line

Nearly vertical
inclined line

Nearly horizontal
inclined line

Small Circle
Method 1 : Starting with a square
1. Lightly sketching the square and marking the mid-points.
2. Draw light diagonals and mark the estimated radius.
3. Draw the circle through the eight points.
Step 1

Step 2

Step 3

Small Circle
Method 2 : Starting with center line
1. Lightly draw a center line.
2. Add light radial lines and mark the estimated radius.
3. Sketch the full circle.
Step 1

Step 2

Step 3

Large Circle
1. Place the little finger (or pencil s tip) at the center as a
pivot, and set the pencil point at the radius-distance from
the center.
2. Hold the hand in this position and rotate the paper.

Arc
Method 1 : Starting with a square

Method 2 : Starting with a center line

Steps in Sketching
1. Block in main shape.
2. Locate the features.
3. Sketch arcs and circles.
4. Sketch lines.

Example