Scribd
Upload
47 views

Uploads Notes Btech 1sem ROM PDF

ROM stands for Read Only Memory and cannot be written to after manufacture. It stores permanent instructions to start a computer and is found in devices like washing machines. There are several types of ROM including MROM which is hard-wired, PROM which can be programmed once, EPROM which can be erased with UV light, and EEPROM which can be erased and reprogrammed electrically thousands of times in small sections. ROM has advantages over RAM such as being non-volatile, not accidentally changeable, cheaper, more reliable, and not requiring refreshing.

Uploaded by

Aman Sharma
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
47 views

Uploads Notes Btech 1sem ROM PDF

ROM stands for Read Only Memory and cannot be written to after manufacture. It stores permanent instructions to start a computer and is found in devices like washing machines. There are several types of ROM including MROM which is hard-wired, PROM which can be programmed once, EPROM which can be erased with UV light, and EEPROM which can be erased and reprogrammed electrically thousands of times in small sections. ROM has advantages over RAM such as being non-volatile, not accidentally changeable, cheaper, more reliable, and not requiring refreshing.

Uploaded by

Aman Sharma
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ROM stands for Read Only Memory.

The memory from which we can only read but cannot write on it. This type of
memory is non-volatile. The information is stored permanently in such memories during manufacture.
A ROM, stores such instruction as are required to start computer when electricity is first turned on, this operation is
referred to as bootstrap. ROM chip are not only used in the computer but also in other electronic items like washing
machine and microwave oven.

Following are the varioys types of ROM

MROM (Masked ROM)


The very first ROMs were hard-wired devices that contained a pre-programmed set of data or instructions. These
kind of ROMs are known as masked ROMs. It is inexpensive ROM.

PROM (Programmable Read only Memory)


PROM is read-only memory that can be modified only once by a user. The user buys a blank PROM and enters the
desired contents using a PROM programmer.Inside the PROM chip there are small fuses which are burnt open
during programming. It can be programmed only once and is not erasable.

EPROM(Erasable and Programmable Read Only


Memory)
The EPROM can be erased by exposing it to ultra-violet light for a duration of upto 40 minutes. Usually, a EPROM
eraser achieves this function. During programming an electrical charge is trapped in an insulated gate region. The
charge is retained for more than ten years because the charge has no leakage path. For erasing this charge, ultraviolet light is passed through a quartz crystal window(lid). This exposure to ultra-violet light dissipates the charge.
During normal use the quartz lid is sealed with a sticker.

EEPROM(Electrically Erasable and Programmable


Read Only Memory)

The EEPROM is programmed and erased electrically. It can be erased and reprogrammed about ten thousand times.
Both erasing and programming take about 4 to 10 ms (milli second). In EEPROM, any location can be selectively
erased and programmed. EEPROMs can be erased one byte at a time, rather than erasing the entire chip. Hence,
the process of re-programming is flexible but slow.

Advantages of ROM

Non-volatile in nature

These can not be accidentally changed

Cheaper than RAMs

Easy to test

More Reliable than RAMs

These are static and do not require refreshing

Its contents are always known and can be verified

You might also like