Scribd
Upload
296 views8 pages

Cisco & Juniper POS Interoperability - Cisco - NSP PDF

Diego Castro is looking for a tested configuration to connect a Cisco 7200 router to a Juniper M10 router with transport equipment in between. Steinar Haug provides a basic configuration using PPP encapsulation, SDH framing, and addressing on both the Cisco and Juniper interfaces. He adds that the Juniper should also specify SDH framing. Diego later clarifies that this is not a direct back-to-back connection but has fiber links of hundreds of miles between the routers. He is having issues bringing up the POS interfaces after upgrading the Cisco IOS for a new card.

Uploaded by

stevoltgutsy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
296 views8 pages

Cisco & Juniper POS Interoperability - Cisco - NSP PDF

Diego Castro is looking for a tested configuration to connect a Cisco 7200 router to a Juniper M10 router with transport equipment in between. Steinar Haug provides a basic configuration using PPP encapsulation, SDH framing, and addressing on both the Cisco and Juniper interfaces. He adds that the Juniper should also specify SDH framing. Diego later clarifies that this is not a direct back-to-back connection but has fiber links of hundreds of miles between the routers. He is having issues bringing up the POS interfaces after upgrading the Cisco IOS for a new card.

Uploaded by

stevoltgutsy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

12/17/2015

Cisco&JuniperPOSinteroperability|Cisco|NSP

Search

Login|RegisterForFree|Help

thislist

for:

Search (Advanced)

MailingListArchive:Cisco:NSP

Cisco&JuniperPOSinteroperability

Index|Next|Previous|PrintThread|ViewThreaded
dcastro5atyahoo
May26,2006,1:01PM
Post#1of9(4422views)
Permalink

Cisco&JuniperPOSinteroperability
Hi
I'mlookingforatestedconfigurationtobeused
betweena7200CiscoandaM10Juniperrouters.
Inthemiddlethereisatransportequipmentthisis
notalabbacktobackconfiguration.
thanks
DiegoCastro
_______________________________________________
cisconspmailinglistcisconsp[at]puck
https://puck.nether.net/mailman/listinfo/cisconsp
archiveathttp://puck.nether.net/pipermail/cisconsp/

sthaugatnethelp
May26,2006,1:29PM
Post#2of9(4294views)
Permalink

Re:Cisco&JuniperPOSinteroperability[Inreplyto ]
>I'mlookingforatestedconfigurationtobeused
>betweena7200CiscoandaM10Juniperrouters.
>
>Inthemiddlethereisatransportequipmentthisis
>notalabbacktobackconfiguration.
Um,thisisprettyplainvanilla?Weuse:
Cisco:
interfacePOS1/0
ipaddress...
encapsulationppp
crc32
posframingsdh
posscrambleatm
posflagc222
nocdpenable
Juniper:
so0/0/0{
clockingexternal
encapsulationppp
sonetoptions{

http://www.gossamerthreads.com/lists/cisco/nsp/45601

1/8

12/17/2015

Cisco&JuniperPOSinteroperability|Cisco|NSP

rfc2615
}
unit0{
familyinet{
address...
}
}
}
SteinarHaug,Nethelpconsulting,sthaug[at]nethelp
_______________________________________________
cisconspmailinglistcisconsp[at]puck
https://puck.nether.net/mailman/listinfo/cisconsp
archiveathttp://puck.nether.net/pipermail/cisconsp/
sthaugatnethelp
May26,2006,1:43PM
Post#3of9(4344views)
Permalink

Re:Cisco&JuniperPOSinteroperability[Inreplyto ]
>Um,thisisprettyplainvanilla?Weuse:
>
>Cisco:
>interfacePOS1/0
>ipaddress...
>encapsulationppp
>crc32
>posframingsdh
>posscrambleatm
>posflagc222
>nocdpenable
>
>Juniper:
>so0/0/0{
>clockingexternal
>encapsulationppp
>sonetoptions{
>rfc2615
>}
>unit0{
>familyinet{
>address...
>}
>}
>}
Betteraddthistoo,sothatbothsidesuseSDHframingandnotjust
theCisco:
chassis{
fpc0{
pic0{
framingsdh
}
}
}
SteinarHaug,Nethelpconsulting,sthaug[at]nethelp
_______________________________________________
cisconspmailinglistcisconsp[at]puck
https://puck.nether.net/mailman/listinfo/cisconsp
archiveathttp://puck.nether.net/pipermail/cisconsp/

bepatwhack
May26,2006,2:27PM
Post#4of9(4299views)

Re:Cisco&JuniperPOSinteroperability[Inreplyto ]
BEGINPGPSIGNEDMESSAGE
Hash:SHA1

http://www.gossamerthreads.com/lists/cisco/nsp/45601

2/8

12/17/2015

Cisco&JuniperPOSinteroperability|Cisco|NSP
Permalink

DiegoCastrowrote:
>Hi
>
>I'mlookingforatestedconfigurationtobeused
>betweena7200CiscoandaM10Juniperrouters.
>
>Inthemiddlethereisatransportequipmentthisis
>notalabbacktobackconfiguration.
>
Uh,configurationofwhat?Whatkindoftransport?

=========
bep
BEGINPGPSIGNATURE
Version:GnuPGv1.4.2.2(MingW32)
Comment:UsingGnuPGwithMozillahttp://enigmail.mozdev.org
iD8DBQFEd3KxE1XcgMgrtyYRAmwuAKC/6d1tQyEJtzr8FnennUfr026dsgCgm6Bf
WbaJDifAB+sVAVK7aSXtlqI=
=PVvE
ENDPGPSIGNATURE
_______________________________________________
cisconspmailinglistcisconsp[at]puck
https://puck.nether.net/mailman/listinfo/cisconsp
archiveathttp://puck.nether.net/pipermail/cisconsp/
dcastro5atyahoo
May27,2006,8:59AM
Post#5of9(4291views)
Permalink

Re:Cisco&JuniperPOSinteroperability[Inreplyto ]
Bep
Iwastryingtosaythatthisisnotabacktoback
directconnectionbetweentworoutersinthelab.
Thereisafiberlinkwithhundredsofmilesinthe
middle.
I'msorryforthisconfusion.
diego
BrucePinsky<bep[at]whack>wrote:
>BEGINPGPSIGNEDMESSAGE
>Hash:SHA1
>
>DiegoCastrowrote:
>>Hi
>>
>>I'mlookingforatestedconfigurationtobeused
>>betweena7200CiscoandaM10Juniperrouters.
>>
>>Inthemiddlethereisatransportequipmentthis
>is
>>notalabbacktobackconfiguration.
>>
>
>Uh,configurationofwhat?Whatkindoftransport?
>
>
>=========
>bep
>
>BEGINPGPSIGNATURE

http://www.gossamerthreads.com/lists/cisco/nsp/45601

3/8

12/17/2015

Cisco&JuniperPOSinteroperability|Cisco|NSP

>Version:GnuPGv1.4.2.2(MingW32)
>Comment:UsingGnuPGwithMozilla
>http://enigmail.mozdev.org
>
>
iD8DBQFEd3KxE1XcgMgrtyYRAmwuAKC/6d1tQyEJtzr8FnennUfr026dsgCgm6Bf
>WbaJDifAB+sVAVK7aSXtlqI=
>=PVvE
>ENDPGPSIGNATURE
>
_______________________________________________
cisconspmailinglistcisconsp[at]puck
https://puck.nether.net/mailman/listinfo/cisconsp
archiveathttp://puck.nether.net/pipermail/cisconsp/
dcastro5atyahoo
May27,2006,10:36AM
Post#6of9(4301views)
Permalink

Re:Cisco&JuniperPOSinteroperability[Inreplyto ]
Mark
Ihada7206VXRrunning12.1(26)E4serviceprovider
usingPAPOSOC3SMIorPAPOSthatisconnectedtomy
ISPthathasaJuniperM10.
NowwegotanewcardPAPOS2OC3thatrequiereanew
versionandisrecommended12.0(30)S1.
Iinstalledthatversiononmyrouterbutafter
restartedthePOSinterfacesdoesn'tshowup/up,only
theprotocolwasdown.
Thenewcardisnotinstalled,becauseIneedthat
bothcardsbeinthesamerouter.
Thefirststepwastoinstallthenewsoftwarewith
theoldhardwarewithoutluck.
Soiwaswonderingthatmaybeisneededsomechangein
theJuniperorCiscoconfiguration.
I'msorryforthelonghistory.
Diego
MarkKent<mark[at]noc>wrote:
>>>Iwastryingtosaythatthisisnotabackto
>backdirectconnection
>>>betweentworoutersinthelab.Thereisafiber
>linkwithhundreds
>>>ofmilesinthemiddle.I'msorryforthis
>confusion.
>
>Ithinkwhatthepreviousposter(bep)wastryingto
>saywas
>thatthebodyofyouremaildidnotmentiona
>critical
>bitofinformation:POS.
>
>ManypeopledonotreadtheSubject:lineofemail.
>
>SorryIcan'thelpwithyouractualrequest,
>althoughIaminterestedintheanswer.
>
>mark
>
_______________________________________________
cisconspmailinglistcisconsp[at]puck

http://www.gossamerthreads.com/lists/cisco/nsp/45601

4/8

12/17/2015

Cisco&JuniperPOSinteroperability|Cisco|NSP

https://puck.nether.net/mailman/listinfo/cisconsp
archiveathttp://puck.nether.net/pipermail/cisconsp/
dcastro5atyahoo
May29,2006,5:41PM
Post#7of9(4299views)
Permalink

Re:Cisco&JuniperPOSinteroperability[Inreplyto ]
nishal
Yes,wehavethesameconfiguration:
posframingsdh
posscrambleatm
Thisrouterwasworkingverygoodwithversion
12.1(26)E4,butthenewcardrequiereadifferenteIOS
12.0(31)S1.
AfterrebootwiththehardwareandIOS12.0(31)S1,the
oldPOSinterfacedoesn'tliketobringupthe
protocol.
IfarestartedagainwiththeoldIOS,everythingis
fine.
TomorrowIwillimplementalabwithmyCiscoandthe
Juniperboxtofindoutwasismissingorchanged.
Iwillinformallofyou.
diego
nishalgoburdhan<nishal[at]is>wrote:
>OnSat,May27,2006at10:36:18AM0700,Diego
>Castrowrote:
>>Mark
>>
>>Ihada7206VXRrunning12.1(26)E4service
>provider
>>usingPAPOSOC3SMIorPAPOSthatisconnectedto
>my
>>ISPthathasaJuniperM10.
>>NowwegotanewcardPAPOS2OC3thatrequierea
>new
>>versionandisrecommended12.0(30)S1.
>>Iinstalledthatversiononmyrouterbutafter
>>restartedthePOSinterfacesdoesn'tshowup/up,
>only
>>theprotocolwasdown.
>>Thenewcardisnotinstalled,becauseIneedthat
>>bothcardsbeinthesamerouter.
>>Thefirststepwastoinstallthenewsoftware
>with
>>theoldhardwarewithoutluck.
>>Soiwaswonderingthatmaybeisneededsome
>changein
>>theJuniperorCiscoconfiguration.
>
>it'spossiblethatthecodechangechangedsomeof
>thedefaultsettings.
>haveyouconfirmedwithyourISPthatyou'veboth
>gotthesameframingset(sdh/sonet)
>posframingsdh
>
>areyoubothusingscrambing(ornot)
>posscrambleatm
>
>
>'shcontrposx/y'usuallyhassomeusefuldebugging
>info...
>

http://www.gossamerthreads.com/lists/cisco/nsp/45601

5/8

12/17/2015

Cisco&JuniperPOSinteroperability|Cisco|NSP

>
>n.
>
_______________________________________________
cisconspmailinglistcisconsp[at]puck
https://puck.nether.net/mailman/listinfo/cisconsp
archiveathttp://puck.nether.net/pipermail/cisconsp/
dcastro5atyahoo
May30,2006,4:23PM
Post#8of9(4307views)
Permalink

Re:Cisco&JuniperPOSinteroperability[Inreplyto ]
Thankstoeveryone,thisissuehasbeensolved.
TheproblemwastheIOSversion.
Thefirsttrialwaswith12.0(31)S1serviceprovider,
andtheprotocolnevercameup.
Inthelabwetriedwith12.0(31)S5serviceprovider,
andeverythingwasworking.
ThisistheJuniperM10configuration:
interfaces{
}
so1/1/0{
encapsulationciscohdlc
sonetoptions{
fcs32
payloadscrambler
rfc2615
}
unit0{
familyinet{
noredirects
address10.1.0.249/30
}
}
}
chassis{
fpc1{
pic1{
framingsdh
}
}
}
ThisistheCisco7206VXRconfiguration:
interfacePOS1/0
ipaddress10.1.0.250255.255.255.252
crc32
posframingsdh
posscrambleatm
saludos
Diego
DiegoCastro<dcastro5[at]yahoo>wrote:
>
>nishal
>

http://www.gossamerthreads.com/lists/cisco/nsp/45601

6/8

12/17/2015

Cisco&JuniperPOSinteroperability|Cisco|NSP

>Yes,wehavethesameconfiguration:
>posframingsdh
>posscrambleatm
>
>Thisrouterwasworkingverygoodwithversion
>12.1(26)E4,butthenewcardrequiereadifferente
>IOS
>12.0(31)S1.
>AfterrebootwiththehardwareandIOS12.0(31)S1,
>the
>oldPOSinterfacedoesn'tliketobringupthe
>protocol.
>IfarestartedagainwiththeoldIOS,everythingis
>fine.
>
>TomorrowIwillimplementalabwithmyCiscoand
>the
>Juniperboxtofindoutwasismissingorchanged.
>Iwillinformallofyou.
>
>diego
>nishalgoburdhan<nishal[at]is>wrote:
>
>>OnSat,May27,2006at10:36:18AM0700,Diego
>>Castrowrote:
>>>Mark
>>>
>>>Ihada7206VXRrunning12.1(26)E4service
>>provider
>>>usingPAPOSOC3SMIorPAPOSthatisconnected
>to
>>my
>>>ISPthathasaJuniperM10.
>>>NowwegotanewcardPAPOS2OC3thatrequiere
>a
>>new
>>>versionandisrecommended12.0(30)S1.
>>>Iinstalledthatversiononmyrouterbutafter
>>>restartedthePOSinterfacesdoesn'tshowup/up,
>>only
>>>theprotocolwasdown.
>>>Thenewcardisnotinstalled,becauseIneed
>that
>>>bothcardsbeinthesamerouter.
>>>Thefirststepwastoinstallthenewsoftware
>>with
>>>theoldhardwarewithoutluck.
>>>Soiwaswonderingthatmaybeisneededsome
>>changein
>>>theJuniperorCiscoconfiguration.
>>
>>it'spossiblethatthecodechangechangedsomeof
>>thedefaultsettings.
>>haveyouconfirmedwithyourISPthatyou'veboth
>>gotthesameframingset(sdh/sonet)
>>posframingsdh
>>
>>areyoubothusingscrambing(ornot)
>>posscrambleatm
>>
>>
>>'shcontrposx/y'usuallyhassomeuseful
>debugging
>>info...
>>
>>
>>n.
http://www.gossamerthreads.com/lists/cisco/nsp/45601

7/8

12/17/2015

Cisco&JuniperPOSinteroperability|Cisco|NSP

>>
>
>_______________________________________________
>cisconspmailinglistcisconsp[at]puck
>https://puck.nether.net/mailman/listinfo/cisconsp
>archiveat
>http://puck.nether.net/pipermail/cisconsp/
>
_______________________________________________
cisconspmailinglistcisconsp[at]puck
https://puck.nether.net/mailman/listinfo/cisconsp
archiveathttp://puck.nether.net/pipermail/cisconsp/
dratcluenet

Re:Cisco&JuniperPOSinteroperability[Inreplyto ]

Jun2,2006,4:17AM
Post#9of9(4276views)
Permalink

OnTue,May30,2006at04:23:30PM0700,DiegoCastrowrote:
>sonetoptions{
>fcs32
>payloadscrambler
>rfc2615
>}
Youcanremovethefcsandpayloadscramblerdirectivesastheyare
includedintherfc2615option.
JustFYI.
Bestregards,
Daniel

CLUERIPEJabber:dr[at]cluenetdr[at]IRCnePGP:0xA85C8AA0
_______________________________________________
cisconspmailinglistcisconsp[at]puck
https://puck.nether.net/mailman/listinfo/cisconsp
archiveathttp://puck.nether.net/pipermail/cisconsp/
Index|Next|Previous|PrintThread|ViewThreaded

NSP

Jumptolist

Interestedinhavingyourlistarchived?ContactGossamerThreads

http://www.gossamerthreads.com/lists/cisco/nsp/45601

WebApplications&ManagedHostingPoweredbyGossamerThreadsInc.

8/8

You might also like