Scribd
Upload
177 views3 pages

Fabrication of Multi Agri Cutter: Synopsis

Low cost, battery powered wireless sensors have recently become commercially available and have the potential to radically alter traditional methods of equipment monitoring in power plants. This paper reports on a research project cosponsored by Southern Company and EPRI to demonstrate wireless sensors in a power plant environment. The designed wireless mesh sensor networks studied in this project operated consistently in the 2.4 GHz wireless frequency band within a coal-fired power plant. Transmission distances of approximately 30 – 50 feet were achieved inside the plant despite concrete and steel obstructions. Communication across multiple levels or floors of the plant was also achieved. The lifetime of the wireless sensor node batteries was adequate for temporary installation (approximately 4-6 months), but can be further increased by reducing data sampling rates, using intelligent local processing techniques, using power harvesting where practical, and taking advantage of advancing battery technologies as they become commercially available. In addition to on-board, embedded sensors that measure light intensity, noise, humidity, temperature and other variables depending on the sensor board, the motes were interfaced to thermocouples for high temperature and accelerometers for rotating machinery vibration measurements.

Uploaded by

Kathir Vel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
177 views3 pages

Fabrication of Multi Agri Cutter: Synopsis

Low cost, battery powered wireless sensors have recently become commercially available and have the potential to radically alter traditional methods of equipment monitoring in power plants. This paper reports on a research project cosponsored by Southern Company and EPRI to demonstrate wireless sensors in a power plant environment. The designed wireless mesh sensor networks studied in this project operated consistently in the 2.4 GHz wireless frequency band within a coal-fired power plant. Transmission distances of approximately 30 – 50 feet were achieved inside the plant despite concrete and steel obstructions. Communication across multiple levels or floors of the plant was also achieved. The lifetime of the wireless sensor node batteries was adequate for temporary installation (approximately 4-6 months), but can be further increased by reducing data sampling rates, using intelligent local processing techniques, using power harvesting where practical, and taking advantage of advancing battery technologies as they become commercially available. In addition to on-board, embedded sensors that measure light intensity, noise, humidity, temperature and other variables depending on the sensor board, the motes were interfaced to thermocouples for high temperature and accelerometers for rotating machinery vibration measurements.

Uploaded by

Kathir Vel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

FABRICATION OF MULTI AGRI CUTTER

SYNOPSIS
This is the new innovative and effective concept mainly used for agricultural
field. It is simple in construction and the working process is also very easy. It is
mostly used in the agricultural field for the cutting of crops, sugarcane, wooden
pieces and etc.., the model consists of a pedal arrangement, cutter, supporting
frame, seat arrangement.
WORKING PRINCIPLE
In our project we use the multi agri cutter for cutting the crops, sugarcane,
wooden materials and etc. The cutter is arranged in a vertical position. A ram is
provided for the sliding movement of the cutter. The cutter is coupled with the cam
arrangement. The cam arrangement is fixed with the pedal as shown the figure.
When the pedal is operated the cutter moves in up and down direction since it is
connected with the cam arrangement. Here the rotary motion is converted in to the
linear motion by using simple mechanisms

ADVANTAGE:
Low cost
Quickly process
Easy to maintain

DISADVANTAGE:
Continuous operation results in fatigue.

APPLICATION
It can be used in agricultural fields for cutting purposes of various crops.

DRAWING FOR FABRICATION OF MULTI AGRI CUTTER

You might also like