Scribd Logo
Upload

Welcome to Scribd!

  • 268 views

    ASME - VIII Div. 2 2004 Edition - AM-211 PDF

    Uploaded by

    Esapermana Riyan
    The document provides specifications for minimum Charpy V-notch impact test requirements for carbon and low alloy steels. It includes two charts showing the minimum energy values required on the vertical axis according to maximum thickness on the horizontal axis for various minimum specified yield strengths. It also lists general notes about interpolation between yield strengths, minimum individual specimen energies, and exemptions for certain materials.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ASME - VIII Div. 2 2004 Edition - AM-211 PDF

    Uploaded by

    Esapermana Riyan
    268 views2 pages
    The document provides specifications for minimum Charpy V-notch impact test requirements for carbon and low alloy steels. It includes two charts showing the minimum energy values required on the vertical axis according to maximum thickness on the horizontal axis for various minimum specified yield strengths. It also lists general notes about interpolation between yield strengths, minimum individual specimen energies, and exemptions for certain materials.

    Original Title

    ASME_VIII Div. 2 2004 Edition_AM-211.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for minimum Charpy V-notch impact test requirements for carbon and low alloy steels. It includes two charts showing the minimum energy values required on the vertical axis according to maximum thickness on the horizontal axis for various minimum specified yield strengths. It also lists general notes about interpolation between yield strengths, minimum individual specimen energies, and exemptions for certain materials.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    268 views2 pages

    ASME - VIII Div. 2 2004 Edition - AM-211 PDF

    Uploaded by

    Esapermana Riyan
    The document provides specifications for minimum Charpy V-notch impact test requirements for carbon and low alloy steels. It includes two charts showing the minimum energy values required on the vertical axis according to maximum thickness on the horizontal axis for various minimum specified yield strengths. It also lists general notes about interpolation between yield strengths, minimum individual specimen energies, and exemptions for certain materials.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    2004 SECTION VIII DIVISION 2

    50

    Minimum specified
    yield strength

    40

    Cv, ft-lb (average of three specimens)

     65, < 95 ksi

    55 ksi
    30
    50 ksi
    45 ksi

    20
     38 ksi

    10

    0
    0

    0.394 0.5

    1.0

    1.5

    2.0

    2.5

     3.0

    Maximum Nominal Thickness, in.


    GENERAL NOTES:
    (a) Interpolation between yield strengths shown is permitted.
    (b) The minimum impact energy for one specimen shall not be less than two-thirds of the average energy required for three specimens.
    (c) Materials produced and impact tested in accordance with SA-320, SA-333, SA-334, SA-350, SA-352, SA-420, SA-437, SA-508 Grade
    5 Class 2, SA-540 (except for materials produced under Table 2, Note 4 in the specification), and SA-765 do not have to satisfy these
    energy values. They are acceptable for use at minimum design metal temperature not colder than the test temperature when the energy
    values required by the applicable specification are satisfied.
    (d) For materials having a specified minimum tensile strength of 95 ksi or more, see AM-211.2.

    FIG. AM-211 CHARPY V-NOTCH IMPACT TEST REQUIREMENTS FOR FULL-SIZE SPECIMENS FOR CARBON
    AND LOW ALLOY STEELS, HAVING A SPECIFIED MINIMUM TENSILE STRENGTH OF LESS THAN 95 ksi, LISTED
    IN TABLE ACS-1

    18

    Copyright ASME International


    Provided by IHS under license with ASME
    No reproduction or networking permitted without license from IHS

    Not for Resale

    PART AM MATERIAL REQUIREMENTS

    60

    Minimum specified
    yield strength
     450, < 660 MPa

    50

    380 MPa

    --`,,```,,,,````-`-`,,`,,`,`,,`---

    Cv, J (average of three specimens)

    40

    350 MPa

    310 MPa
    30

     260 MPa

    20

    10

    0
    0

    10

    20

    30

    40

    50

    60

    70

     75

    Maximum Nominal Thickness, mm


    GENERAL NOTES:
    (a) Interpolation between yield strengths shown is permitted.
    (b) The minimum impact energy for one specimen shall not be less than two-thirds of the average energy required for three specimens.
    (c) Materials produced and impact tested in accordance with SA-320, SA-333, SA-334, SA-350, SA-352, SA-420, SA-437, SA-508 Grade
    5 Class 2, SA-540 (except for materials produced under Table 2, Note 4 in the specification), and SA-765 do not have to satisfy these
    energy values. They are acceptable for use at minimum design metal temperature not colder than the test temperature when the energy
    values required by the applicable specification are satisfied.
    (d) For materials having a specified minimum tensile strength of 655 MPa or more, see AM-211.2.

    FIG. AM-211M CHARPY V-NOTCH IMPACT TEST REQUIREMENTS FOR FULL-SIZE SPECIMENS FOR CARBON
    AND LOW ALLOY STEELS, HAVING A SPECIFIED MINIMUM TENSILE STRENGTH OF LESS THAN 655 MPa,
    LISTED IN TABLE ACS-1

    19

    Copyright ASME International


    Provided by IHS under license with ASME
    No reproduction or networking permitted without license from IHS

    Not for Resale

    You might also like