Scribd Logo
Upload

Welcome to Scribd!

  • 33 views

    Mach Ani Cal Property

    Uploaded by

    votiendai
    The document provides mechanical property requirements for various steel grades used in construction, including yield strength, tensile strength, elongation percentages, and bendability specifications. Standards listed include JIS G 3505, JIS G 3101, JIS G 3112, GOCT 5781-82, TCVN 1651-85, ASTM A 615/A 615M, BS 4449, and DIN 17100. Mechanical properties vary depending on the specific steel grade and may include minimum requirements for properties like yield strength, tensile strength, and elongation percentages. Bendability specifications like minimum bend diameters and angles are also included for some grades.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    Mach Ani Cal Property

    Uploaded by

    votiendai
    33 views1 page
    The document provides mechanical property requirements for various steel grades used in construction, including yield strength, tensile strength, elongation percentages, and bendability specifications. Standards listed include JIS G 3505, JIS G 3101, JIS G 3112, GOCT 5781-82, TCVN 1651-85, ASTM A 615/A 615M, BS 4449, and DIN 17100. Mechanical properties vary depending on the specific steel grade and may include minimum requirements for properties like yield strength, tensile strength, and elongation percentages. Bendability specifications like minimum bend diameters and angles are also included for some grades.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides mechanical property requirements for various steel grades used in construction, including yield strength, tensile strength, elongation percentages, and bendability specifications. Standards listed include JIS G 3505, JIS G 3101, JIS G 3112, GOCT 5781-82, TCVN 1651-85, ASTM A 615/A 615M, BS 4449, and DIN 17100. Mechanical properties vary depending on the specific steel grade and may include minimum requirements for properties like yield strength, tensile strength, and elongation percentages. Bendability specifications like minimum bend diameters and angles are also included for some grades.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    33 views1 page

    Mach Ani Cal Property

    Uploaded by

    votiendai
    The document provides mechanical property requirements for various steel grades used in construction, including yield strength, tensile strength, elongation percentages, and bendability specifications. Standards listed include JIS G 3505, JIS G 3101, JIS G 3112, GOCT 5781-82, TCVN 1651-85, ASTM A 615/A 615M, BS 4449, and DIN 17100. Mechanical properties vary depending on the specific steel grade and may include minimum requirements for properties like yield strength, tensile strength, and elongation percentages. Bendability specifications like minimum bend diameters and angles are also included for some grades.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 1

    THEÙP XAÂY DÖÏNG CONSTRUCTION STELL

    TÍNH CHAÁT CÔ LYÙ MECHANICAL PROPERTY

    Tieâu Giới hạn chảy Giôùi haïn ñöùt Độ giản daøi


    Maùc theùp Khả năng uốn
    chuaån Yield strength Tensile strength Elongation (%)
    Grade Bendable
    Standard (N/mm2 = MPa) (N/mm2 = MPa)

    Goùc uoán Baùn kính goái uoán


    d ≤ 20mm 20 < d < 40
    Bend angle Inside radius

    SWRM 10 - - - - -
    JIS G 3505
    SWRM 20 - - - - -

    JIS G 3101 SS400 235 min 400 - 510 21 min 180 0


    1,5d

    20 min (d > 25 mm)


    SR235 235 min 380 - 510 1800 1,5d
    24 min (d ≤ 25mm)

    16 min (d > 25 mm) 1,5d (d ≤ 16)


    SD295 A 295 min 440 - 600 1800
    18 min (d ≤ 25mm) 2d ( d > 16)
    JIS G 3112
    16 min (d > 25 mm)
    SD390 390-510 560 min 1800 2,5d
    18 min (d ≤ 25mm)

    12 min (d > 25 mm) 2,5d (d ≤ 25 )


    SD490 490-625 620 min 900
    14 min (d ≤ 25mm) 3d (d>25 )

    32 min (d ≤ 20 mm)
    CT2 225 min 210 min 330 - 430 1800 0
    31 min (d > 20 mm)

    ГOCT 37 min (d ≤ 20 mm)


    CT3 245 min 235 min 370 - 480 1800 0,25d
    5781 - 82 36 min (d > 20mm)

    20 min (d ≤ 20 mm)
    CT5 280 min 270 min 490 - 620 1800 1,5d
    19 min (d > 20mm)

    CI 240 min 380 min 25 min 1800 0,25d

    CII 300 min 500 min 19 min 1800 1,5d


    TCVN
    1651-85
    CIII 400 min 600 min 14 min 1800 1,5d

    CIV 600 min 900 min 6 min 1800 1,5d

    32 min (d ≤ 20 mm)
    BCT34 225 min 210 min 330 - 430 1800 0
    31 min (d > 20mm)

    27 min (d ≤ 20 mm)
    BCT38 245 min 235 min 370 - 480 1800 0,25d
    TCVN 26 min (d > 20mm)
    1651 - 85 24 min (d ≤ 20 mm)
    BCT42 260 min 255 min 410 - 520 1800 1d
    23 min (d > 20mm)

    20 min (d ≤ 20 mm)
    BCT51 280 min 270 min 490 - 620 1800 1.5d
    19 min (d > 20mm)

    Gr300
    300 min 500 min 11 min 1,75d (d < 20 mm)
    (Gr 40 )
    ASTM A 615/
    1800
    A 615M Gr400 2,5d ( d ≥ 20 mm)
    420 min 620 min 9 min
    (Gr 60 ) 3,5d ( d ≥ 30 mm)

    Gr 250 250 min 280 min 22 min 1d

    BS 4449 180 0
    2,5d (d ≤16 mm )
    Gr 460 460 min 480 min 12 min
    3,5d (d > 16 mm )

    USt 37-1,2
    25 min (d ≤ 25 mm)
    RSt 37-1,2 235 min 360 - 440 1800 1d
    18 min (d > 25mm)
    St 37-3
    USt 42-1,2
    22 min (d ≤ 25 mm)
    RSt 42-1,2 250 min 410 - 490 1800 2d
    16 min (d > 25mm)
    DIN 17100 St 42-3

    RSt 46-2 22 min (d ≤ 25 mm) 2d (d ≤16 mm )


    280 min 430 - 530 1800
    St 46-3 16 min (d > 25mm) 3d (d > 16 mm )

    22 min (d ≤ 25 mm)
    St 52-3 350 min 510 - 690 1800 2d
    16 min (d > 25mm)

    1kPa = 1000Pa = 1000N/m2 = 0,001N/mm2


    1Mpa = 1000kPa = 10kG/cm 2
    1kPa =0,145psi
    1MPa = 1N/mm2

    You might also like