Scribd
Upload
347 views1 page

Specifications

The document summarizes the status of blocked material for several coil numbers from the Bremen mill. Rust was observed on coils with thicknesses of 1-1.5mm even after cutting sheets, while rust disappeared on a 0.5mm thick coil after slitting. One coil was slitted from both sides up to 25cm from the edge with the remaining material in good condition. In total, the blocked material amounted to over 117 tons across different grades and thickness.

Uploaded by

Florence de Slegte
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
347 views1 page

Specifications

The document summarizes the status of blocked material for several coil numbers from the Bremen mill. Rust was observed on coils with thicknesses of 1-1.5mm even after cutting sheets, while rust disappeared on a 0.5mm thick coil after slitting. One coil was slitted from both sides up to 25cm from the edge with the remaining material in good condition. In total, the blocked material amounted to over 117 tons across different grades and thickness.

Uploaded by

Florence de Slegte
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

blocked tonns

blocked in
thickn width claimed T status of blocked sheets/narrow blocked in
coil nr. mill STA grade ess of coil total material strip<600mm coil details of rust
3,35t in sheets
1000x2000mm/ rust even after
764476192 Bremen 183 DX51D Z275 MA C 1 1000 15.97 12,62t in coil 3.350 12.620 cuting 3,35t
5,815t in sheets
1500x3000mm/ rust even after
779182155 Bremen 172 DX51D Z275 MA EP 1.5 1500 24.94 19,125t in coil 5.815 19.125 cuting 5,815t
3,42t in sheets
1500x3000mm/21,56t rust even after
777495162 Bremen 172 DX51D Z275 MA EP 1.5 1500 24.98 in coil 3.420 21.560 cuting 3,42t
after cuting
3,995t in sheets 3,995t rust
780047231 Bremen 2911 DX51D Z140 MA EP 0.5 1000 3.995 1000x3800mm 3.995 0.000 disappeared
wholeafter sliting
from from both
slited to 2xto width sides, upto
775343366 Bremen 1671 220 A O 1.2 1590 24.82 790mm 0.000 24.820 25cm from side
3,46t in sheets
1000x2000mm/12,3t rust even after
764476186 Bremen 183 DX51D Z275 MA EP 1 1000 15.76 in coil 3.460 12.300 cuting 3,46t

6,885t in strips width second part of


763542258 Bremen 872 GXES G10/10 O 1.47 1590 6.885 175mm, rest OK 6.885 0.000 length of m.coil
117.35 26.925 90.425

You might also like