Scribd
Upload
17 views9 pages

HW#1.a Contour Diagram of The Temperature Solution Mesh Size at 0.001

This document contains the results of a finite element analysis on the temperature variation and heat flux of a cylinder. It includes: 1. Contour plots showing the temperature variation along the height and radius of the cylinder for different mesh sizes. 2. Plots of heat flux along the bottom surface of the cylinder for varying mesh sizes. 3. A log file of the FEA simulation commands and results for a steady state thermal analysis on the cylinder with a fixed temperature boundary condition and convection heating.

Uploaded by

Bashu Poudel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
17 views9 pages

HW#1.a Contour Diagram of The Temperature Solution Mesh Size at 0.001

This document contains the results of a finite element analysis on the temperature variation and heat flux of a cylinder. It includes: 1. Contour plots showing the temperature variation along the height and radius of the cylinder for different mesh sizes. 2. Plots of heat flux along the bottom surface of the cylinder for varying mesh sizes. 3. A log file of the FEA simulation commands and results for a steady state thermal analysis on the cylinder with a fixed temperature boundary condition and convection heating.

Uploaded by

Bashu Poudel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 9

HW#1.

a Contour diagram of the Temperature Solution


Mesh size @ 0.001

HW#1.b
40
39.8
39.6
39.4
Temperature (o C) 39.2
39
38.8
38.6
0

0.02 0.04 0.06 0.08 0.1 0.12 0.14


Height of Cylinder (m)

1.b. Temperature variation on the outside surface along the height of cylinder

HW#1.C
2791
2741
2691
2641
2591
Heat Flux

2541
2491
2441
2391
2341
2291
0

0.01

0.01

0.02

0.02

0.03

Radius of Cylinder (m)

1.c. Heat Flux variation along the bottom surface of the Cylinder
HW#1.D.1
Mesh size @ 0.002

HW#1.D.2

40
39.8
39.6
39.4
Temperature (o C) 39.2
39
38.8
38.6
0

0.03

0.05

0.08

0.1

0.13

0.15

Height of Cylinder (m)

1.d2. Temperature variation on the outside surface along the height of


cylinder

HW#1d3
2739
2689
2639
2589
2539
Heat Flux 2489
2439
2389
2339
2289
0

0.01

0.01

0.02

0.02

0.03

Radius of Cylinder (m)

1.d3. Heat Flux variation along the bottom surface of the Cylinder
HW#1.e- Log file
/BATCH
! /COM,ANSYS RELEASE 12.0.1 UP20090415
21:03:04 09/14/2010
!*
!*
/NOPR
/PMETH,OFF,0
KEYW,PR_SET,1
KEYW,PR_STRUC,0
KEYW,PR_THERM,1
KEYW,PR_FLUID,0
KEYW,PR_ELMAG,0
KEYW,MAGNOD,0
KEYW,MAGEDG,0
KEYW,MAGHFE,0
KEYW,MAGELC,0
KEYW,PR_MULTI,0
KEYW,PR_CFD,0
/GO
!*
! /COM,
! /COM,Preferences for GUI filtering have been set to display:
! /COM, Thermal
!*
/PREP7

!*
ET,1,PLANE55
!*
KEYOPT,1,1,0
KEYOPT,1,3,1
KEYOPT,1,4,0
KEYOPT,1,8,0
KEYOPT,1,9,0
!*
!*
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,KXX,1,,237
RECTNG,0,2.5/100,0,15/100,
ESIZE,0.003,0,
MSHKEY,0
CM,_Y,AREA
ASEL, , , ,
1
CM,_Y1,AREA
CHKMSH,'AREA'
CMSEL,S,_Y
!*
AMESH,_Y1
!*
CMDELE,_Y
CMDELE,_Y1
CMDELE,_Y2
!*
FINISH
/SOL
FLST,2,1,4,ORDE,1
FITEM,2,1
!*
/GO
DL,P51X, ,TEMP,40,0
FLST,2,2,4,ORDE,2
FITEM,2,2
FITEM,2,-3
/GO
!*
SFL,P51X,CONV,13, ,25,
! /STATUS,SOLU
SOLVE
FINISH
/POST1
!*
! /EFACET,1
! PLNSOL, TEMP,, 0
FLST,2,2,1
FITEM,2,2

FITEM,2,11
!*
PATH,outside,2,30,100,
PPATH,P51X,1
PATH,STAT
!*
!*
PDEF, ,TEMP, ,AVG
! /PBC,PATH, ,0
!*
! /PBC,PATH,1
! /REPLOT
! /PBC,PATH,0
!*
! /PBC,PATH,1
! /REPLOT
! /PBC,PATH,0
!*
! /PBC,PATH,1
! /REPLOT
! /PBC,PATH,0
!*
! /PBC,PATH,1
! /REPLOT
! /PBC,PATH,0
!*
! /PBC,PATH,1
! /REPLOT
! /PBC,PATH,0
!*
! PLPATH,TEMP
! PRPATH,TEMP
! APLOT
!*
PDEF, ,TF,Y,AVG
! /PBC,PATH, ,0
!*
! PLPATH,TEMP,TFY
! APLOT
!*
! /EFACET,1
! PLNSOL, TEMP,, 0
FLST,2,2,1
FITEM,2,1
FITEM,2,2
!*
PATH,bot,2,30,100,
PPATH,P51X,1
PATH,STAT
!*

!*
PDEF,flx,TF,Y,AVG
! /PBC,PATH, ,0
!*
! PLPATH,FLX
! PRPATH,FLX
! APLOT
! LGWRITE,'HW1','txt','C:\Users\bdp0076\',COMMENT

You might also like