Module 2 Part 66
Module 2 Part 66
Module 2 Part 66
10. What is the momentum of a ball of mass 2 grams and has a velocity
of 10cm/s
# a) 0.0002 kgm/s
b) 20 kgm/s
c) 5 kgm/s
11. What do you get when you add 2H2 and O2
a) H2O
b) 2H2O2
# c) 2H2O
12. A time period of 10 microseconds is equal to a frequency of
a) 10 kHz
b) 1 Mhz
# c) 100 kHz
13. When heat flows from a hot area to a cold area it is called
a) convection
# b) conduction
c) radiation
14. the specific heat capacity of a gas heated at constant pressure, when
compared to the specific heat capacity of a gas heated at constant
volume, is
a) the same
b) less
# c) more
15. A gyroscope suffers from apparent wander. This is due to
a) friction on the gimbals and bearings
b) the aircraft flying along a north/south track
# c) the earth's rotation
16. The splitting of a chemical compound is called
# a) analysis
b) bombardment
c) synthesis
17. The quadrature component of a vector is
a) 180o to the original
b) 45o to the original
# c) 90o to the original
18. 1 Newton is equal to
a) 1 joule per second
b) 1 kilogram of force
# c) 1 kilogram meter per second per second
Page 2 - Mod 2
Page 5 - Mod 2
Page 6 - Mod 2
Page 7 - Mod 2
Page 9 - Mod 2
Page 10 - Mod 2
Page 11 - Mod 2
111. A cyclist goes from rest to 50 m/s in 5 seconds. What is the average
acceleration?
a) 12 m/s2
# b) 10 m/s2
c) 8 m/s2
112. What form of heat is used to turn a solid into a liquid?
a) specific heat
b) coefficient of heat
# c) heat of fusion
113. When a steel bar is overstressed, what is the name of the point at
which it does not return to its original form after the load is released?
# a) yield point
b) ultimate point
c) Young's modulus
114. When a liquid is heated, it expands
# a) more than a solid
b) less than a solid
c) more than a gas
115. If pressure on a liquid increases, whilst temperature is held
constant, the volume will
a) increase
b) decrease
# c) remain constant
116. What is 1 btu in joules per kilogram
a) 9.18 J/kg
# b) 2346 j/kg
c) 4128 j/kg
117. Two pure tones of similar frequency are heard by a person. What
will they hear?
# a) A beat of the two tones
b) One pure tone
c) Two tones
118. If you push an object with a force of 5 N for 10 m in 4 seconds, how
much power is used?
a) 200 Watts
b) 8 watts
# c) 12.5 watts
119. The focal point of a mirror is
a) the radius
b) 2 x the radius
# c) 1/2 the radius
Page 13 - Mod 2
120. 2 couples with magnitude F act against each other. The resultant
will be
a) 2F
b) - 2F
# c) 0
121. The height of mercury required to give 1 bar is
# a) 760 mm
b) 700 mm
c) 1000 mm
122. A vessel has 25 ml of water which produces 10 kPa. If another 125
ml of water is added, what will be the pressure in the vessel
a) 40 kPa
b) 50 kPa
# c) 60 kPa
123. 2 hydraulic jacks with different diameters have the same fluid
pressures entering at the same rate. They will extend at
a) the same rate
# b) different rates
c) the same rate until the smaller jack becomes full
124. The standard for measuring pressure is
# a) +20oC and 760 mm of mercury
b) 0oC and 760 mm of mercury
c) -20oC and 700 mm of mercury
125. What load can be lifted on jack B?
a) 100N
b) 200N
c) 300N
136. Which type of circuit is used when the temperature of the source
has insufficient heat for thermocouple application?
a) Temperature bulb
b) Balanced bridge
# c) Thermistor
137. The most common method of expressing pressure is in
a) grams per square inch
b) inch pounds per square inch
# c) pounds per square inch
138. The difference between two pressures is
# a) differential pressure
b) vacuum pressure
c) static pressure
139. The impact pressure caused by the impression of air against the
opening of a
a) static port is pitot pressure
# b) pitot-tube is pitot pressure
c) pitot-tube is static pressure
140. Static pressure is present in
a) the pitot tube
b) any ram air port
# c) undisturbed air
141. What torque loading would you apply to a nut if the force is 50 lbs,
exerted 2 feet from its axis?
# a) 100 lbs.ft
b) 251 lbs.ft
c) 600 lbs.ft
142. When different signals are transmitted down a fibre optic core, are
they distinguished by a
a) star coupler
b) active filter
# c) passive filter
143. In a jack with a ram only on one side and hydraulic fluid applied
from both sides
# a) the ram will move to the side where the ram is, due to pressure
acting on differential areas
b) the ram will move opposite to the side where the ram is due to
pressure acting on differential areas
c) a condition of hydraulic lock exists and no movement will take
place
Page 16 - Mod 2
144. Using the same hydraulic pressure, the force applied by a hydraulic
jack of 4 sq inch piston area
a) will be equal to that applied by a similar jack of 2 sq inch piston
area
# b) will be twice that applied by a similar jack of 2 sq inch piston area
c) will be half that applied by a similar jack of 2 sq inch piston area
145. A pressure of 100 psi act on two jacks in a hydraulic system piston
area 2 sq in and 4 sq in
a) the smaller jack will exert a force of 50 lb and the larger a force of
25 lb
b) the two jacks will exert the same force
# c) the smaller jack will exert a force of 200 lb and the larger a force of
400 lb
146. on an Optical Time Domain Reflectometer (OTDR),the attenuation is
a) derived from a graph
b) dialed into OTDR
# c) read from the cathode ray display
147. The purpose of an accumulator in a hydraulic system is to
a) collect air from the hydraulic fluid, thus reducing the requirement
for frequent bleeding
b) relieve excess pressure
# c) store hydraulic fluid under pressure
148. If the hydraulic system accumulator has a low air pressure, it will
cause
# a) rapid pressure fluctuations during operation of services
b) rapid movement of the operating jacks
c) slow build up of pressure in the system
149. The specific torque loading for a bolt is 50 lbs.ins but an extension
of 2 is needed to reach the bolt in addition to the 8 torque wrench.
What will the actual reading?
a) 54 lb.ins
# b) 40 lb.ins
c) 60 lb.ins
150. If 1500 psi hydraulic pressure is pumped into an accumulator, with
a pre-charge air pressure of 1000 psi the gauge will read
a) 2500 psi
b) 1000 psi
# c) 1500 psi
151. A compressor increases
a) kinetic energy
# b) potential energy
c) moving energy
Page 17 - Mod 2
152. P1 x V1 / T1 = P1 x V2 / T2 is
a) Charles' law
b) Boyle's law
# c) Ideal gas law
153. V1 / T1 = V2 / T2
# a) Charles' law
b) ideal gas law
c) Boyle's law
154. P1 x V1 = P2 x V2
a) Charles' law
# b) Boyle's law
c) ideal gas law
at a constant pressure is
at a constant temperature is
155. Change from solid to gas state without going through liquid state is
called
a) state leap
b) transformation
# c) sublimation
156. 1 CHU = Centigrade Heat Unit = 1400 ft lbs = energy to raise
a) 1 lb of water by 1 F
# b) 1 lb of water by 1 C
c) 1 kg of water by 1 C
157. 1 BTU = 778 ft lbs to raise =
a) 1 kg of water to heat up by 1 F
b) 1 lb of water to heat up by 1 C
# c) 1 lb of water to heat up by 1 F
158. 1 HP = 33000 ft lbs / min or 500 ft lbs / s or
# a) 746 Watts
b) 736 Watts
c) 1360 Watts
159. 1 Watt =
a) 1 HP
# b) 1 Joule/s
c) 1kg/h
160. Temperature change -1.98C per 1000 ft up to 36,000 ft where it
remains constant at
a) - 56F
b) - 52C
# c) - 56C
Page 18 - Mod 2
161. A freely falling body, falling from a height of 2km, and assuming g =
10m/s2, will strike the ground in a time of
# a) 20s
b) 80s
c) 400s
162. What is the angular velocity of a shaft rotating at 300rpm in
radians/second?
a) 5pi radians/second
b) 2pi radians/second
# c) 10pi radians/second
163. If a machine has a mechanical advantage of 10 and a velocity ratio
of 20, the efficiency of the machine is
a) 2
# b) 0.5
c) 200%
164. The force that acts on a body to cause it to rotate in a circular path
is called the
a) centrifugal force
# b) centripetal force
c) inertia force
165. A temperature of 41 degrees Fahrenheit is, in Centigrade is
# a) 5 degrees
b) 9 degrees
c) 7 degrees
166. Heat is defined as
a) the stored energy in a hot body
# b) energy in transit
c) a high temperature
167. An aircraft of 2 metric tones uses 800 kilojoules kinetic energy to
make an emergency stop. Its brakes apply a force of 10 kiloNewtons.
What distance does it travel before it comes to a stop?
a) 40m
# b) 80m
c) 800m
168. What is the smallest particle of matter that can exist in nature?
a) A molecule
# b) An atom
c) An isotope
Page 19 - Mod 2
a) 3
b) 4
c) 7
a) 5
b) 4
c) 9
Page 23 - Mod 2
204. 1kg of water is heated from 0oC to 2oC. Does its volume
# a) decrease
b) stay the same
c) increase
205. A fire engine is approaching you with its siren on. As it passes you
does its pitch
a) increase
# b) decrease
c) stay the same
206. A body rotating at an angular velocity of 5 radians/sec, with a radius
of 5metres has a speed of
a) 5&pi meters per second
b) 5 meters per second
# c) 25 meters per second
207. A mass of 400 kg moves 27metres, with a force of 54N, what is the
work produced
# a) 1458 J
b) 10.1 KJ
c) 583.2 KJ
208. A cylinder filled with water to half a meter will exert a pressure of
a) 4.9 pa
b) 49 pa
# c) 4900 pa
209. A mass of 10kg placed 2 meters away from a pivot will have a
moment of
# a) 196 NM
b) 20 NM
c) 50 NM
210. 25 liters of fuel exerts a pressure of 10KPa, if a further 125 liters is
added, the pressure will now be
a) 50KPa
# b) 60KPa
c) 40KPa
211. The quantity of heat developed by burning 1 kg of fuel is known as
a) radiant heat
b) latent heat
#
c) heat of combustion
212. The transfer of heat through radiation is achieved by
a) warming up the intervening medium
b) not warming up the intervening medium
#
c) the application of radioactive isotopes
Page 24 - Mod 2
213. 1 kW is
a) 1.56 HP
#
b) 3413 btu per hour
c) 360 Joules
214. 1000 lb/in2 is in an accumulator. If 3000 lb/in 2 of hydraulic fluid is
pumped in, what is the pressure on the air side?
a) 4000 lb/in2
b) 1000 lb/in2
#
c) 3000 lb/in2
215. A converging lens converges light rays because
a) the light source is already converging
#
b) the light waves move slower in the centre of the lens than they
do at the extremities
c) it is not a sphere
216. Coded light waves of varying wavelength travel down a fiber optic
cable. To separate them at the other end you would use
a) a star coupling
#
b) a passive filter
c) an active filter
217. - 40C in Fahrenheit is minus
#
a) - 40F
b) 72F
c) 8F
218. Absolute zero is
a) 0C
b) 273.15 K
#
c) - 273.15C
219. A 4.5 kW electric motor is 90% efficient. How much energy does it
use in 20 seconds?
#
a) 100 kJ
b) 90 kJ
c) 2.25 kJ
220. An optical fiber has attenuation. When using an OTDR
#
a) dial in the known attenuation
b) the shape of the curve will tell you how much attenuation there is
c) ignore it
221. One degree on the Centigrade scale is equal to what on the
Fahrenheit Scale
a) 12F
#
b) 1.8F
c) 33F
Page 25 - Mod 2
Page 27 - Mod 2
Page 32 - Mod 2
293. When a beam of light passes from one medium to another with a
different refractive index, what will happen to the beam of light?
#
a) Change speed
b) Total internal reflection
c) Total internal refraction
294. A fiber optic cable has different refractive indexes across its
diameter, it is
a) step index
#
b) graded index
c) single mode
295. The formula for calculating shear is
a) force x area
#
b) force area
c) force cross-sectional area
296. Combined gas law relates volume, pressure and
#
a) temperature
b) velocity
c) density
297. An aircraft of 2 metric tones lands with 400 kilojoules of energy, 10
kiloNewtons of force is applied at the brakes, how far does the aircraft
take to stop?
a) 400 M
#
b) 40 M
c) 800 M
298. If a car travels 18km in 1 minutes, what is it velocity in m/s?
#
a) 200 m/s
b) 150 m/s
c) 100 m/s
299. Three common types of refrigerant are
#
a) dry ice, freon, ammonia
b) ammonia, freon, methyl bromide
c) dry ice. Methyl bromide, ammonia
300. The heat required to change a liquid to a gas at constant
temperature is the heat of
a) fusion
#
b) vaporization
c) condensation
301. An atom with a full outer shell is
a) a good conductor
#
b) practically inert
c) a good insulator
Page 34 - Mod 2
311. The standard temperature and pressure for measuring the density
of liquids is
a) 0C and 760 mmHg
#
b) 4C and 760 mmHg
c) 15C and 760 mmHg
312. The standard temperature and pressure for measuring the volume
of liquids and solids is
#
a) 20C and 760 mmHg
b) 20C and 700 mmHg
c) 0C and 760 mmHg
313. Pure semiconductors have
a) many holes
b) large amounts of free electrons
#
c) few free electrons
314. H20 in what form holds most energy
a) Ice
#
b) Steam
c) Water
315. If a tensile load is placed on a bar it will
#
a) stretch
b) bend
c) crush
316. Compressibility is
a) stress/strain
#
b) strain/stress
c) stress x strain
317. A radar rotates 1 revolution each 30 seconds and uses 10J of
energy each revolution. How many joules does it use in a day?
#
a) 28.8 kJ
b) 720 kJ
c) 7200 kJ
318. The usable bandwidth of a fiber is determined by
a) the angle of total internal reflection
#
b) the intermodal dispersion
c) the wavelength of the light
319. A block of metal is melted. It will
a) increase in volume
#
b) decrease in volume
c) remain the same volume
Page 36 - Mod 2
320. How would you work out the work done by a machine assuming it
is 100% efficient?
#
a) Mechanical advantage and input
b) Input and output
c) Mechanical advantage and output
321. A block slides down a slope. Assuming there is no friction
# a) kinetic energy is gained at the same rate as potential energy is
lost
b) kinetic energy is gained at a greater rate than potential energy is
lost
c) potential energy is gained at a greater rate than kinetic energy is
lost
322. Specific gravity is
a) kg/m3
#
b) pure numbers
c) m/s2
323. A body of 10 kg is swinging attached at the end of a 2m pole. What
is its moment at the bottom?
#
a) 196 NM
b) 20 NM
c) 80 NM
324. The transfer of heat from a hot place to a cold place is called
a) convection
#
b) conduction
c) radiation
325. A light aircraft flies in a semi-circle from point A to point B. If the
circle has a radius of 20km and the time taken is 30mins, the average
speed is?
#
a) 125.7 km/h
b) 80 km/h
c) 110 km/h
326. The landing speed of an aircraft is 54 m/s. If the maximum
deceleration is 3m/s2 the minimum length of runway required is
a) 162m
b) 360m
#
c) 486m
327. The number of radians in a semi circle are
a) exactly 3
b) 2pi
#
c) pi
Page 37 - Mod 2
337. 1 KW is equal to
a) 252 BTU
#
b) 1.34 HP
c) 1000 Joules
338. What atmospheric conditions will cause the true landing speed of
an aircraft to be highest?
#
a) High temp, high humidity
b) Low temp, high humidity
c) Head wind, low humidity
339. If a tuning fork is struck and held close to the ear and slowly
rotated about the vertical axis, in one rotation how many times is there
no sound?
a) 4
#
b) 2
c) Sound is audible for the whole revolution
340. What type of friction requires the greatest force to overcome it?
a) Rolling friction
#
b) Static friction
c) Dynamic friction
341. Which of Newton's laws relates to the formula: Force = mass x
acceleration
a) 1st
#
b) 2nd
c) 3rd
342. A 6000 kg engine is lifted off a wing to a height 0.5 meters and then
pushed across the hangar 24 meters. The force required to push the
trolley is 12 kN. What is the work done to move the trolley?
a) 298kJ
#
b) 288kJ
c) 84MJ
343. What is the phenomenon that occurs when a siren that approaches
you, at the point of passing, the pitch decreases?
a) Resonance
b) Echo
#
c) Doppler effect
344. Viscosity is known as
#
a) the internal resistance for a fluid to flow
b) fluids flowing in a straight line
c) Newton's 1st law of motion
Page 39 - Mod 2
Page 41 - Mod 2
Ahmed Marafi
26569