Edge Brochure

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

pH EC DO

pH
Resolution selectable from 0.01
and 0.001 pH
Range -2.00016.000 pH
Accuracy 0.002 pH
Data logging
Manual log on demand
Manual log on stability
Interval logging
Temperature readout (C or F)
Automatic Temperature Compensation
CAL-CHECK Indicators:
Probe condition
Response time
Check buffer
Clean electrode
Sensor Check Indicators:
Broken electrode
Clogged junction
GLP data
Records date, time, offset, slope and buffers
used during calibration
5 point calibration
A choice of 7 pre-programmed buffers plus 2
selectable custom buffers
Calibration tag on screen
- Identifies buffers used for current calibration
Calibration expiration warning

Conductivity
Four ring potentiometric probe
Covers all ranges from 0.00 S/cm to
500 mS/cm (absolute EC)

Dissolved Oxygen
Clark type polarographic probe with
replacement membrane cap
Ranges:

Accuracy

2.00 - 45.00 mg/L (ppm)

1% of the reading (0.05 S/cm or 1 digit,


whichever is greater)

0.0 - 300.0 % oxygen saturation

Calibration
Offset (0 S/cm) and cell factor calibration
Choice of 5 standards
Auto-ranging or manual range selection
EC, TDS, and Salinity reading modes
Temperature compensation

Accuracy 1.5% full scale


Calibration at 1 or 2 points 0% and 100% (air)
Automatic temperature compensation
from 0 50 C
GLP data
Records date, time, calibration standards,
altitude value and salinity value
Altitude compensation -500 4000 meters

Automatic
NoTC (absolute)

Salinity compensation 0 - 40g/L

GLP data
Records date, time, offset, and cell constant
value (K)
Adjustable EC to TDS conversion factor
Adjustable temperature correction
coefficient

0 0.5 8.8 8 5.5

footprint

inch thick

oz. weight

hours battery life

inch display

USB ports

edge pH EC DO
Two USB Ports
Hanna Instruments is proud to introduce the worlds most
innovative pH meter... edge.
edge is thin and lightweight, measuring just 12 thick and
weighing less than 9 ounces. edge has an incredibly wide
viewing angle, 5.5 LCD and a sensitive capacitive touch keypad.
edge measures pH, conductivity and dissolved oxygen through
its unique digital electrodes. These digital electrodes are autorecognized. Providing sensor type, calibration data and a serial
number, and they connect to edge with an easy to plug-in
3.5mm connector. edges versatile design is equally at home in
your hand, on a lab bench or mounted on a wall. edge simplifies
measurement, configuration, calibration, diagnostics, logging
and transferring data to a computer or a USB drive.
edge features Hannas exclusive CAL-CHECK to warn
you if the electrode you are using is not clean or if your buffers
are contaminated during calibration. We have also added to
CAL-CHECK for sensors with matching pin: now it warns you if
the pH bulb is cracked, and if the junction of the electrode
is compromised.
edge is the culmination of Hannas vision, design capabilities,
integrated production facilities, and world class R&D teams.
With edge, Hanna has set the new standard!

edge includes one standard USB for exporting


data with a flash drive. edge also includes
one micro USB port for you to connect to a
computer for file export and for charging your
edge when the cradle is not available.

5.5"

Large, Easy to Read LCD


edge features a 5.5 LCD display
that you can clearly view from over
5 meters. The large display and its
wide 150 viewing angle provide
one of the easiest to read LCDs in
the industry.

Clear, Full Text Readout


edge features clear, full text guides
displayed on the bottom of the screen.
There is no need to decipher scrambled
abbreviations or symbols; these helpful
messages guide you through every process
quickly and easily.

Great Design

edge is incredibly thin and


lightweight, measuring just 1/2"
thick and weighing just 8.8 ounces.

Capacitive Touch Buttons


edge features a capacitive touch keypad that
gives a distinctive, modern look. Since the
keypad is part of the screen, your buttons
can never get clogged with sample residue.
The up and down keys move faster when
continuously held (ideal for scrolling through
numerous logs).

Cradle and Electrode Holder


edge is equipped with a benchtop
cradle with an adjustable swivel
electrode holder to charge and
hold the edge securely in place at
the optimium viewing angle.

Basic mode
You can use edge in Basic Mode,
ideally for routine measurements
for a simplified screen and
features.

GLP

Data of the last calibration you perform is


stored in the sensor: electrodes offset, slope,
date, time and buffer/standards. When any
sensor (pH, EC, or DO) is connected to the edge,
GLP data is automatically transferred.

CAL-CHECK
edge features Hannas exclusive
CAL-CHECK to warn you if the bulb
of the electrode is not clean or if the
buffers are contaminated during
calibration.

Zero Footprint
Using the wall mount cradle (included), edge
can be placed on a wall, leaving zero footprint
on the benchtop space. The cradle has a built
in connector to power edge and charge its
batteries. edge's zero footprint is designed to
save you valuable benchtop space.

Data Logging
edge allows you to store up to 1000
log records of data. Data sets include
readings, GLP data, date and time.

Sensor Check (only HI 12301 and HI 11311)

When used with Hannas electrodes


equipped with a matching pin, edge
constantly checks the impedance of the pH
measuring electrode to notify you in real
time in the event of glass breakage. During
calibration, Sensor Check checks the state of
the junction. The reference junction is also
evaluated and reported on the display.

3.5 mm Probe Input


Plugging an electrode in has never
been simpler, no alignments, no
broken pins, just connect the
3.5 mm plug and get started.

Digital Smart Electrodes


The electrodes used with edge are nearly
as advanced as the edge itself: featuring
a built-in microchip that stores sensor
type, ID, and calibration information that is
automatically retrieved by edge once the
electrode is plugged in.
Stored pH calibration information includes: calibrated
buffers, date, time, offset and slope characteristics of the
electrode. Conductivity calibration information includes:
calibrated conductivity standards, date, time, and cell
constant of the sensor. Dissolved oxygen calibration
information includes: standards used for calibration, date,
time, altitude and salinity correction.
These digital electrodes also feature an easy to plug in
3.5 mm connector so you never have to worry about the right
angle or aligning pin settings.

Technical Specifications
Specifications

pH

EC

DO

Temperature

Additional
Specifications

Range

Basic: -2.00 to 16.00 pH: 1000.0 mV


Standard: -2.00 to 16.00 pH, -2.000 to 16.000 pH; 1000 mV

Resolution

Basic: 0.1 mV
Standard: 0.01 pH; 0.001 pH

Accuracy (@25C/77F)

0.01 pH; 0.002 pH; 0.2 mV

Calibration Points

5in Standard; 3 in Basic

Calibration Buffers

standard mode: 1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45 and two custom buffers
basic mode: 4.01, 6.86, 7.01, 9.18, 10.01

Temperature Compensation

ATC (-5.0 to 100.0C; 23.0 to 212.0F)*

Electrode Diagnostics

Standard: probe condition, response time and out of calibration range, glass and reference junction diagnostics ( HI
11311 & HI 12301 only)
EC

TDS

Range

0.00 to 29.99 S/cm; 30.0 to 299.9


S/cm; 300 to 2999 S/cm; 30.0 to
200.0 mS/cm; up to 500.0 mS/cm
(absolute EC)**

0.00 to 14.99 mg/L (ppm); 15.0 to 149.9


mg/L (ppm); 150 to 1499 mg/L (ppm);
0.0 to 400.0 % NaCl;
1.50 to 14.99 g/L; 15.0 to 100.0 g/L;
0.01 to 42.00 PSU
up to 400.0 g/L (absolute TDS)**, with 0.0 to 80.0 g/L
0.80 conversion factor

Resolution

0.01 S/cm; 0.1 S/cm; 1 S/cm;


0.01 mS/cm; 0.1 mS/cm

0.01 mg/L (ppm); 0.1 mg/L (ppm);


1 (ppm) 0.01 g/L; 0.1 g/L (0.8 TDS
factor)

0.1 % NaCl; 0.01 PSU; .01 g/L

Accuracy (@25C/77F)

1% of reading (0.5 S or 1 digit,


whichever is greater)

1% of reading (0.03 ppm or 1 digit,


whichever is greater)

1% of reading

Calibration

1 point offset calibration (0.00 S/cm


in air); 1 point slope calibration in EC
standard 84 S/cm, 1413 S/cm, 5.00
mS/cm, 12.88 mS/cm,
80.0 mS/cm and 118.8 mS/cm

through EC calibration

1 point with HI 7037L 100% NaCl


sea water standard (other scales
through EC calibration)

Temperature Compensation

noTC, ATC (-5.0 to 100.0C; 23.0 to 212.0F)

TDS Factor

0.40 to 0.80

Range

0.00 to 45.00 ppm; 0.0 to to 300.0 % saturation

Resolution

0.01 ppm; 0.1 % saturation

Accuracy

1.5% of reading 1 digit

Calibration Points

one or two points at 0% (HI 7040 solution) and 100% (in air)

Temperature Compensation

ATC (0 to 50C; 32.0 to 122.0 F)*

Salinity Compensation

0 to 40 g/L (with 1 g/L resolution)

Altitude Compensation

-500 to 4000 m (with 100 m resolution)

Range

-20.0 to 120.0C; -4.0 to 248.0F

Resolution

0.1C; 0.1F

Accuracy

0.5C; 0.9 F

Logging

stores up to 1000 records: 200 records (log-on-demand and stability logging); 600 records interval logging

Connectivity

1 USB port for storage; 1 micro USB port for charging and PC connectivity

pH Electrode (included)

HI 11310 glass body pH electrode with 1/8(3.5mm) connector and 1 m (3.3) cable

Environment

0 to 50C (32 to 122F); RH max 95% non-condensing

Power Supply

5 VDC adapter (included)

Dimensions

202 x 140 x 12.7mm (8 x 5.5 x 0.5)

Weight

250 g (8.82 oz.)

* temperature limits will be reduced to actual probe/sensor limits


** with temperature compensation function disabled

Salinity

Ordering Information

Electrodes

edge is available in 3 configurations: pH, EC and DO


All Kits Include:

Benchtop docking station


with electrode holder

Wall-mount cradle

USB cable

5 VDC power adapter

The pH kit HI 2020-01 (115V) and HI 2020-02 (230V) also includes:

2 sachets of
pH 4 buffer solutions

2 sachets of
pH 7 buffer solutions

2 sachets of
pH 10 buffer solutions

Electrode cleaning
solutions

HI 11311
Single ceramic, double junction,
refillable pH electrode with
temperature sensor and matching pin

Recommended for laboratory and


general purpose

Recommended for laboratory and


general purpose

HI 12300
Double junction, gel filled,
PEI body, pH electrode with
temperature sensor

HI 12301
Double junction, gel filled, PEI body,
pH electrode with temperature
sensor and matching pin

Recommended for field


applications

Recommended for field


applications

HI 10530
Triple ceramic, single junction,
low temperature glass, refillable
pH electrode with conical tip and
temperature sensor

HI 10430
Single ceramic,double junction,
high temperature glass, refillable
pH electrode with double junction

Instruction manual

In addition to these components, the following items are also included:

HI 11310
Glass body, refillable
pH electrode with
temperature sensor

HI 11310
Single ceramic, double junction,
refillable pH electrode with
temperature sensor

Quality certificate

The EC kit HI 2030-01 (115V) and HI 2030-02 (230V) also includes:

HI 763100
Conductivity probe

3 sachets of
1413 S/cm
conductivity standard

3 sachets of
12880 S/cm
conductivity standard

Recommended for fats and


creams, and soil samples

Recommended for paints, solvents,


strong acids and bases, high
conductivity samples, and Tris buffer

HI 763100
Conductivity eletrode with
temperature sensor

HI 764080
Dissolved Oxygen electrode with
temperature sensor

Recommended for
general purpose

Recommended for
general purpose

Quality certificate

HI 764080
Dissolved Oxygen
electrode

HI 7041S
Refill electrolyte
solution

2 DO membrane caps

Hanna Instruments Inc.


584 Park East Drive, Woonsocket, RI 02895
www.hannainst.com

2 DO membrane cap
o-rings

Quality certificate

P/L edge 2/14

The DO kit HI 2040-01 (115V) and HI 2040-02 (230V) also includes:

You might also like