Scribd
Upload
179 views10 pages

Slides Ejercicios Ecodial

This document contains instructions for 10 exercises using the Ecodial V 4.8 software for electrical installation design. The exercises cover changing cable insulation type, customizing protection settings, switchboard constraints, operating modes, customizing earthing systems, setting voltage drop parameters, creating a cable extension, and analyzing total harmonic distortion. The exercises are from a 2015 Schneider Electric training on using the Ecodial software.

Uploaded by

Paul Richard Sanchez Tapia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
179 views10 pages

Slides Ejercicios Ecodial

This document contains instructions for 10 exercises using the Ecodial V 4.8 software for electrical installation design. The exercises cover changing cable insulation type, customizing protection settings, switchboard constraints, operating modes, customizing earthing systems, setting voltage drop parameters, creating a cable extension, and analyzing total harmonic distortion. The exercises are from a 2015 Schneider Electric training on using the Ecodial software.

Uploaded by

Paul Richard Sanchez Tapia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

DISEO DE INSTALACIONES

ELCTRICAS

Empleando software ECODIAL V 4.8 INT

Exercice N1
Change the type of insulation (XLPE to PVC)

Schneider Electric - Customer Software Ecodial 4 Training (C) - 2015

Exercice N 2
How to personalize a protection settings?

Schneider Electric - Customer Software Ecodial 4 Training (C) - 2015

Exercice N3

Schneider Electric - Customer Software Ecodial 4 Training (C) - 2015

Exercice N 4 switchboard constraints

Schneider Electric - Customer Software Ecodial 4 Training (C) - 2015

Exercice N5
operating modes (Normal/Emergency)

Schneider Electric - Customer Software Ecodial 4 Training (C) - 2015

N7: How to customize an Earthing system ?

IT

Schneider Electric - Customer Software Ecodial 4 Training (C) - 2015

N 8 Voltage drop
Project parameter =>
DeltaU cable = 4%

Schneider Electric - Customer Software Ecodial 4 Training (C) - 2015

Ex N9

create an extension

Single core cable /PVC/ trefoil


Cable voltage drop = 4%

Schneider Electric - Customer Software Ecodial 4 Training (C) - 2015

Ex N 10 - THDI
Single core cable

42 %

Schneider Electric - Customer Software Ecodial 4 Training (C) - 2015

10

You might also like