Scribd
Upload
791 views1 page

Screw Conveyor Calculation

This document summarizes the calculation of parameters for a screw conveyor designed to transport bagasse at a bulk density of 200 kg/m3. The conveyor will be 2 meters long, use a standard JHS-200 screw, and have a 35% degree of filling and capacity of 5 tons/hour. The calculations determine that the conveyor should operate at 281 rpm to achieve a product speed of 0.94 m/s and volume capacity of 25 m3/hour with no inclination and 1.1 kW of power required.

Uploaded by

113314
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
791 views1 page

Screw Conveyor Calculation

This document summarizes the calculation of parameters for a screw conveyor designed to transport bagasse at a bulk density of 200 kg/m3. The conveyor will be 2 meters long, use a standard JHS-200 screw, and have a 35% degree of filling and capacity of 5 tons/hour. The calculations determine that the conveyor should operate at 281 rpm to achieve a product speed of 0.94 m/s and volume capacity of 25 m3/hour with no inclination and 1.1 kW of power required.

Uploaded by

113314
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Screw conveyor calculation

1 of 1

http://www.solidsprocessing.nl/applic/jh/schroef/berekening.php

Request a stand-alone version with all calculation sheets


http://www.jh.nl
[email protected]
SCREW CONVEYOR CALCULATI ON
Product
Bulk density
Power factor
Degree of filling

bagasse

Standard screw

200 kg/m3
1

Product speed

35 %

Rpm screw

Capacity

5 ton/u

Volume capacity

Inclination height (+/-)

0 m

Inclination angle

Length of the screw

2 m

Section length

Standard screw

JHS-200

281.37 omw/min
25 m3/uur
0 deg
2000 mm

ok

Nr. of screw blades

10

* screw diameter

200 mm

Weight per section

30.25 kg

* pitch

200 mm

Number of sections

* screw blade thickness


* core, material
admissible stress
diameter
thickness
* Axis, material

JHS-200

0.94 m/s

3 mm
St-37
114.3 mm
St-37

diameter

40 mm

I NFO
program by BSE Enschede

Ideal stress core

2.45 N/mm2

Ideal stress axis

13.39 N/mm2

4 mm
40 N/mm2

Power selected

0.07 mm

140 N/mm2

admissible stress
Intermediate bearings

Sag

0
1.1 kW

Info calculation
Power ISO 7119

0.03 kW

Power J&H

0.09 kW
I NFO

CALCULATE
stop

print page

9/27/2015 3:02 PM

You might also like