Scribd
Upload
2K views4 pages

EXPT:-Study of J K Flip Flop Using IC 7476 Apparatus:-IC 7476, Breadboard, Single Stand Wires

The document discusses the JK flip-flop, which can be used to store state information. A JK flip-flop has two stable states and two inputs, J and K, that control its state. Applying different combinations of signals to J and K result in setting, resetting, or toggling the output of the flip-flop. The document provides circuit diagrams of a JK flip-flop made with NAND gates and the pin diagram of the IC 7476 chip, which implements a JK flip-flop. It also includes the characteristic equation, truth table, and timing diagram of the JK flip-flop.

Uploaded by

Poonam Gholap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2K views4 pages

EXPT:-Study of J K Flip Flop Using IC 7476 Apparatus:-IC 7476, Breadboard, Single Stand Wires

The document discusses the JK flip-flop, which can be used to store state information. A JK flip-flop has two stable states and two inputs, J and K, that control its state. Applying different combinations of signals to J and K result in setting, resetting, or toggling the output of the flip-flop. The document provides circuit diagrams of a JK flip-flop made with NAND gates and the pin diagram of the IC 7476 chip, which implements a JK flip-flop. It also includes the characteristic equation, truth table, and timing diagram of the JK flip-flop.

Uploaded by

Poonam Gholap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

EXPT:-Study of J k Flip Flop using IC 7476

Apparatus:-IC 7476, breadboard, single stand wires


A flip-flop or latch is a circuit that has two stable states and can be used to store state
information. A flip-flop is a bistable multivibrator. The circuit can be made to change state by
signals applied to one or more control inputs and will have one or two outputs. It is the basic
storage element in sequential logic. Flip-flops and latches are a fundamental building block
of digital electronics systems used in computers, communications, and many other types of
systems.
Flip-flops and latches are used as data storage elements. Such data storage can be used for
storage of state, and such a circuit is described as sequential logic
JK flip-flop

A circuit symbol for a positive-edge-triggered JK flip-flop

A JK flip-flop made of NAND gates


The JK flip-flop augments the behavior of the SR flip-flop (J=Set, K=Reset) by interpreting the
S = R = 1 condition as a "flip" or toggle command. Specifically, the combination J = 1, K = 0 is a
command to set the flip-flop; the combination J = 0, K = 1 is a command to reset the flip-flop;
and the combination J = K = 1 is a command to toggle the flip-flop, i.e., change its output to the
logical complement of its current value. Setting J = K = 0 does NOT result in a D flip-flop, but

rather, will hold the current state. To synthesize a D flip-flop, simply set K equal to the
complement of J. Similarly, to synthesize a T flip-flop, set K equal to J. The JK flip-flop is
therefore a universal flip-flop, because it can be configured to work as an SR flip-flop, a D flipflop, or a T flip-flop.
The characteristic equation of the JK flip-flop is:

Truth table and Excitation Table

Characteristic table

Excitation table

Comment

Qnext

Comment

Qnext

hold state

No Change

reset

Set

set

Reset

toggle

No Change

JK flip-flop timing diagram

Pin diagram of IC 7476

Procedure:1.Make the connection as per the circuit diagram


2. Verify the truth table.

Conclusion:-

You might also like