Verification of Ohm's Law
Verification of Ohm's Law
VI
V=IR
Apparatus:
Procedure:
1. Set variable power supply to DC and connect it to main power supply to check it for
any error.
2. Connect wires to variable power under DC mark then correct black wire to the black
and red to respective terminal in power supply
3. Ammeter should be connected to variable power supply in series
4. Now increase the voltage through block rotating regulator step by step
5. Note the reading and plot the graph
Precautions
1. Check that all the connections are tight and proper.
2. Dont turn on the power while making connections.
3. Check that current should not exceed the ammeter limit