Scribd
Upload
37 views2 pages

Concurrent

The document provides technical specifications for a mixing process, including mix rates of 1 sack and 1 cubic meter per minute. It lists properties like density and pounds per gallon both before and after increasing density from 1200 to 4250 kilograms per cubic meter. The final density achieved after mixing was 56.35 kilograms per cubic meter.

Uploaded by

Ardalan Fezzi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
37 views2 pages

Concurrent

The document provides technical specifications for a mixing process, including mix rates of 1 sack and 1 cubic meter per minute. It lists properties like density and pounds per gallon both before and after increasing density from 1200 to 4250 kilograms per cubic meter. The final density achieved after mixing was 56.35 kilograms per cubic meter.

Uploaded by

Ardalan Fezzi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Mix rate

OMD
POP

Density increase

1 sack/min
1200 kg/m3
0.5 m3/min
40 kg
4250 kg/m3
56.35104 kg/m3

1
10.01452
132.086
88.1848
35.4681
0.470272

0.470272

sack/min
ppg
gal/min
lb
ppg

1 sack/min
10 ppg
3.144905 bpm
88.1848 lb
35.4681 ppg

ppg

11.24475 ppg

You might also like