BAB IV

ANALOG TO DIGITAL CONVERTER

4.1. Abstrak
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________

4.2. Tujuan Percobaan

4.2.1. Mengetahui prinsip kerja dari Analog to Digital converter pada mikrokontroller.
[IRFAN FATAHUDDIN/D41113035]

4.2.2. Mengetahui register-register yang berperan dalam analog to digital converter

4.2.3. Mampu menjelaskan kelebihan dan kekurangan dari ADC pada mikro dan pada
devais lainnya.
4.3. Teori Dasar
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________

4.4. Alat dan Bahan

1. Modul Minimum ATMEGA 16
2. USB 2.0 A to B Printer Cable
3. LCD 16 x2
[IRFAN FATAHUDDIN/D41113035]

4. Jumper
5. Catu daya DC
6. Multimeter Digital
7. Bread Board
8. Resistor
9. Potensiometer
10. Laptop dengan Software Codevision AVR
4.5. Gambar Percobaan

[IRFAN FATAHUDDIN/D41113035]

4.6. Prosedur Percobaan

1. Menyiapkan alat dan bahan yang akan digunakan
2. Merangkai rangkaian seperti pada rangkaian percobaan dengan menghubungkan pin Vcc
dan pin Ground pada prot Ao ke kaki potensiometer.
3. Menghubungkan LCD ke port ATMEGA 16 untuk menampilkan hasil konversi ADC.
4. Selanjutnya buka codevision AVR pada laptop dan lakukan inisialisasi dari ADC. Setelah
selesai, lakukan generated program dan lihat pada listing program, ketik instruksi sebagai
berikut :
Unsigned int dtadc, tegangan ;
Unsigned char buf, buf1;
while (1)
{
dtadc = read_adc (0);
tegangan = (((float)dtadc/1023)*5000);
lcd_gotoxy (0,0);
sprintf (buf, hasil = %i,dtadc);
lcd_puts (buf);
lcd_gotoxy (0,1);
sprintf (buf1,v=%i,tegangan);
lcd_puts(buf1);
lcd_gotoxy(12,1);
lcd_puts (mv);
}
5. Setelah listing program selesai, maka hubungkan rangkaian dengan catu daya dan
hubungkan downloader pada laptop.
6. Build all program, kemudian click Program the chip jika program tidak ada yang error.
Tunggu hingga proses downloader selesai.
7. Kemudian lihat hasilnya pada LCD, ukurlah tegangan pada potensiometer dengan
menggunakan multimeter dan catat hasilnya yang ditunjukkan oleh LCD dan multimeter
pada lembaran data.
8. Melakukan langkah ke-tujuh dengan merubah nilai potensiometer dengan kenaikan 200
[IRFAN FATAHUDDIN/D41113035]

. Dimulai dari 200 - 7 k.

9. Merapikan alat dan bahan yang telah digunakan.

4.7. Hasil Pengamatan

[IRFAN FATAHUDDIN/D41113035]

4.8. Analisa Hasil Pengamatan

[IRFAN FATAHUDDIN/D41113035]

4.9. Kesimpulan dan Saran

[IRFAN FATAHUDDIN/D41113035]

[IRFAN FATAHUDDIN/D41113035]

DATA SEMENTARA
NAMA

NIM

TANGGAL

ASISTEN

[IRFAN FATAHUDDIN/D41113035]

LAMPIRAN

/*****************************************************
This program was produced by the
CodeWizardAVR V2.05.3 Standard

[IRFAN FATAHUDDIN/D41113035]

Automatic Program Generator

Copyright 1998-2011 Pavel Haiduc, HP InfoTech s.r.l.
http://www.hpinfotech.com
Project :
Version :
Date : 10/10/2015
Author : Irfan
Company :
Comments:
Chip type
: ATmega16A
Program type
: Application
AVR Core Clock frequency: 8.000000 MHz
Memory model
: Small
External RAM size
:0
Data Stack size
: 256
*****************************************************/
#include <mega16a.h>
#include <delay.h>
#include <stdio.h>
#include <alcd.h>
#define ADC_VREF_TYPE 0x00
// Read the AD conversion result
unsigned int read_adc(unsigned char adc_input)
{
ADMUX=adc_input | (ADC_VREF_TYPE & 0xff);
// Delay needed for the stabilization of the ADC input voltage
delay_us(10);
// Start the AD conversion
ADCSRA|=0x40;
// Wait for the AD conversion to complete
while ((ADCSRA & 0x10)==0);
ADCSRA|=0x10;
return ADCW;
}
// Declare your global variables here
unsigned int dtadc,tegangan;
unsigned char buf[33],buf1[33];
void main(void)
{
// Declare your local variables here
// Input/Output Ports initialization
// Port A initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTA=0x00;
DDRA=0x00;
// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTB=0x00;
DDRB=0x00;
// Port C initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTC=0x00;

[IRFAN FATAHUDDIN/D41113035]

DDRC=0x00;
// Port D initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTD=0x00;
DDRD=0x00;
// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: Timer 0 Stopped
// Mode: Normal top=0xFF
// OC0 output: Disconnected
TCCR0=0x00;
TCNT0=0x00;
OCR0=0x00;
// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer1 Stopped
// Mode: Normal top=0xFFFF
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
OCR1BH=0x00;
OCR1BL=0x00;
// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer2 Stopped
// Mode: Normal top=0xFF
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;
// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
// INT2: Off
MCUCR=0x00;
MCUCSR=0x00;
// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x00;
// USART initialization
// USART disabled
UCSRB=0x00;

[IRFAN FATAHUDDIN/D41113035]

// Analog Comparator initialization

// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;
// ADC initialization
// ADC Clock frequency: 750.000 kHz
// ADC Voltage Reference: AREF pin
// ADC Auto Trigger Source: ADC Stopped
ADMUX=ADC_VREF_TYPE & 0xff;
ADCSRA=0x84;
// SPI initialization
// SPI disabled
SPCR=0x00;
// TWI initialization
// TWI disabled
TWCR=0x00;
// Alphanumeric LCD initialization
// Connections are specified in the
// Project|Configure|C Compiler|Libraries|Alphanumeric LCD menu:
// RS - PORTB Bit 0
// RD - PORTB Bit 1
// EN - PORTB Bit 2
// D4 - PORTB Bit 4
// D5 - PORTB Bit 5
// D6 - PORTB Bit 6
// D7 - PORTB Bit 7
// Characters/line: 16
lcd_init(16);
while (1)
{
// Place your code here
dtadc = read_adc(0); // data adc yang terbaca sesuai rangkaian yang tersambung ke Port A0
tegangan = (((float)dtadc/1023)*5000);// dtadc=input analog, 1023=10bit resolusi, 5000= tegangan
input(vcc)
lcd_gotoxy(0,0); //posisi karakter yang ditampilkan di lcd, lcd_gotoxy itu x,y
sprintf(buf,"hasil =%i",dtadc);// sprintf perintah untuk menampilkan data
lcd_puts(buf); //untuk menampilkan karakter di lcd
lcd_gotoxy(0,1);
sprintf(buf1,"v = %i mV",tegangan);
lcd_puts(buf1);
}
}

[IRFAN FATAHUDDIN/D41113035]