Scribd
Upload
295 views2 pages

AeroShell Grease 14 TDS

AeroShell Grease 14 is a calcium soap-based, mineral oil helicopter multi-purpose grease. It has outstanding anti-fret and anti-corrosion properties, and can operate within a wide temperature range of -54 to +93 degrees Celsius. AeroShell Grease 14 is approved by all major helicopter manufacturers and is particularly suitable for lubricating helicopter main rotor bearings, splines, and tail rotor bearings due to its anti-fret properties.

Uploaded by

SkySupplyUSA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
295 views2 pages

AeroShell Grease 14 TDS

AeroShell Grease 14 is a calcium soap-based, mineral oil helicopter multi-purpose grease. It has outstanding anti-fret and anti-corrosion properties, and can operate within a wide temperature range of -54 to +93 degrees Celsius. AeroShell Grease 14 is approved by all major helicopter manufacturers and is particularly suitable for lubricating helicopter main rotor bearings, splines, and tail rotor bearings due to its anti-fret properties.

Uploaded by

SkySupplyUSA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet

AeroShell Grease 14
AeroShell Grease 14 is a helicopter multi-purpose grease composed of a mineral oil thickened with a calcium soap,
possessing outstanding anti-fret and anti-moisture corrosion properties. It is oxidation and corrosion inhibited.
The useful operating temperature range is 540C to +930C.

Main Applications

Specifications, Approvals & Recommendations

AeroShell Grease 14 is the leading helicopter multi-purpose U.S. : Approved MIL -G-25537C
grease and is approved by all helicopter manufacturers.
British : Approved DEF STAN 91-51
Owing to its anti-fret properties, AeroShell Grease 14 is
NATO Code : G-366
particularly suitable for the lubrication of helicopter main and Joint Service Designation : XG-284
For a full listing of equipment approvals and recommendations,

tail rotor bearings, splines, etc.

please consult your local Shell Technical Helpdesk.

Typical Physical Characteristics


Properties
Oil type
Thickener type

MIL-G-25537C
-

Typical
Mineral

Calcium soap

Base Oil viscosity

@400C

mm2/s

12.5

Base Oil viscosity

@1000C

mm2/s

3.1

Useful operating temperature range

54 to +93

Drop point

140 min

148

C
C

Worked penetration

@250C

265 to 305

273

Unworked penetration

@250C

200 min

269

Bomb oxidation pressure drop 100 hrs @990C

MPa

0.0345 max

0.0207

Bomb oxidation pressure drop 400 hrs @990C

MPa

0.1378 max

0.0689

%m

5.0 max

1.5

%m

7.2

Oil separation 30 hrs

@1000C

Water resistance test loss


Evaporation loss 22 hrs

@1000C

%m

7.0 max

5.6

Antifriction bearing performance

@930C

hrs

1700+

Copper corrosion 24 hrs

@1000C

Must pass

Passes

Bearing protection 2 days

@520C

Must pass

Passes

Tan

Colour

These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.

Page 1 of 2

AeroShell Grease 14, v 1.1

22.07.2014.12.16

Health, Safety & Environment

Health and Safety


Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/

Protect the Environment


Take used oil to an authorised collection point. Do not discharge into drains, soil or water.

Additional Information

Advice
Advice on applications not covered here may be obtained from your Shell representative.

Page 2 of 2

AeroShell Grease 14, v 1.1

22.07.2014.12.16

You might also like