Scribd
Upload
57 views1 page

M M P P For P M M P M M P P For P M M P: Angle Steel Member Capacity Based On AISC 360-10 Input Data & Design Summary

The document summarizes the capacity design check of an L8x6x1 angle steel member subjected to axial compression (P), strong axis bending (Mrx), weak axis bending (Mry), strong direction shear (Vstrong), and weak direction shear (Vweak). It provides the input load values and member dimensions. The design check verifies that the member capacities for combined compression and bending per AISC 360-10 Chapter H1, and for shear per Chapter G2, exceed the applied load effects. The design is reported to be adequate.

Uploaded by

sushilkumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
57 views1 page

M M P P For P M M P M M P P For P M M P: Angle Steel Member Capacity Based On AISC 360-10 Input Data & Design Summary

The document summarizes the capacity design check of an L8x6x1 angle steel member subjected to axial compression (P), strong axis bending (Mrx), weak axis bending (Mry), strong direction shear (Vstrong), and weak direction shear (Vweak). It provides the input load values and member dimensions. The design check verifies that the member capacities for combined compression and bending per AISC 360-10 Chapter H1, and for shear per Chapter G2, exceed the applied load effects. The design is reported to be adequate.

Uploaded by

sushilkumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

PROJECT :

CLIENT :
JOB NO. :

PAGE :
DESIGN BY :
REVIEW BY :

DATE :

Angle Steel Member Capacity Based on AISC 360-10


INPUT DATA & DESIGN SUMMARY
ANGLE SIZE
L8X6X1
STEEL YIELD STRESS

Fy =

36

ksi

P=

10

kips, ASD
kLx =

20

ft

kLy =

10

ft

AXIAL COMPRESSION FORCE


STRONG GEOMETRIC AXIS EFFECTIVE LENGTH
WEAK GEOMETRIC AXIS EFFECTIVE LENGTH
STRONG GEOMETRIC AXIS BENDING MOMENT

Mrx =

ft-kips, ASD
Lbx =

Vstrong =

77

kips

Mry =

ft-kips, ASD
Lby =

Vweak =

60

kips

STRONG GEOMETRIC AXIS BENDING UNBRACED LENGTH


STRONG DIRECTION SHEAR LOAD, ASD
WEAK GEOMETRIC AXIS BENDING MOMENT
WEAK GEOMETRIC AXIS BENDING UNBRACED LENGTH
WEAK DIRECTION SHEAR LOAD, ASD

20

ft, (AISC 360-10 F2.2.c)

10

ft

THE DESIGN IS ADEQUATE.


ANALYSIS
CHECK COMBINED COMPRESSION AND BENDING CAPACITY (AISC 360-10, H1)

P r 8 M r ,max M r ,min

P c 9 M c ,max M c ,min

for

P r 0.2
Pc

for

P r 0.2
Pc

P r M r ,max M r ,min

2 P c M c ,max M c ,min

Where

Pc = Pn / c =

136

0.91

/ 1.67 =

81.28

>

<

1.0

[Satisfactory]

kips, (AISC 360-10 Chapter E5)


Pr
[Satisfactory]

Mr,max =

7.78

ft-kips

or

0.71

ft-kips

,(major principal axis bending)

Mr,min =

0.71

ft-kips

or

7.78

ft-kips

,(minor principal axis bending)

ft-kips, (smaller equal-leg section used, AISC 360-10 Chapter F10-2)


Mr,max
[Satisfactory]

Mc,max = Mn / b =

42.24

/ 1.67 =

25.29

Mc,min = Mn / b =

15.89

/ 1.67 =

9.51

>
>

ft-kips
Mr,min

[Satisfactory]

CHECK SHEAR CAPACITY (AISC 360-10, G2)


Vn,strong / v =

172.8

/ 1.67 =

103.5

kips

>

Vstrong =

77.0

kips

[Satisfactory]

Vn,weak / v =

129.6

/ 1.67 =

77.6

kips

>

Vweak =

60.0

kips

[Satisfactory]

You might also like