Scribd
Upload
102 views

Call Flow

This document describes the signaling procedures between a mobile station (MS) and network during a mobile originating call and mobile terminating call. It outlines the steps which include channel request, authentication, ciphering mode setting, call initiation, assignment of a traffic channel, call acceptance, and call release. It also breaks down the call phases in a mobile originating call between the MS, base transceiver station (BTS), and base station controller (BSC) covering paging, assignment, signaling, ciphering, conversation and release.

Uploaded by

11009105053
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
102 views

Call Flow

This document describes the signaling procedures between a mobile station (MS) and network during a mobile originating call and mobile terminating call. It outlines the steps which include channel request, authentication, ciphering mode setting, call initiation, assignment of a traffic channel, call acceptance, and call release. It also breaks down the call phases in a mobile originating call between the MS, base transceiver station (BTS), and base station controller (BSC) covering paging, assignment, signaling, ciphering, conversation and release.

Uploaded by

11009105053
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 3

Signalling (Mobile Originating Call)

MS

Channel request (RACH)

NETWORK

Immediate assignment (AGCH)

Immediate assignment

Service request (SDCCH)


Service request
Authentication request (SDCCH)
Authentication response (SDCCH)

Authentication

Ciphering mode command (SDCCH)


Ciphering mode complete (SDCCH)

Ciphering mode setting

Setup (SDCCH)
Call proceeding (SDCCH)

Call initiation

Assignment command (SDCCH)


Assignment complete (FACCH)

Assignment of traffic channel

Alert (FACCH)
Call confirmation
Connect (FACCH)
Connect acknowledged (FACCH)

Call accepted

Signalling (Mobile Terminating Call)


MS

Page request (PCH)

NETWORK

Channel request (RACH)

Immediate assignment

Immediate assignment (AGCH)


Page response (SDCCH)
Service request
Authentication request (SDCCH)
Authentication response (SDCCH)

Authentication

Ciphering mode command (SDCCH)


Ciphering mode complete (SDCCH)

Ciphering mode setting

Setup (SDCCH)
Call confirmation (SDCCH)

Call initiation

Assignment command (SDCCH)


Assignment complete (FACCH)

Assignment of traffic channel

Alert (FACCH)
Call confirmation
Connect (FACCH)
Connect acknowledged (FACCH)

Call accepted

Call Phases (MOC case)


MS

BTS

BSC

CH. REQUEST (RACH)


IMMEDIATE ASSIGN(AGCH)

Phase 1 : Paging, initial MS

SERVICE REQUEST (SDCCH)


AUTHENTICATION (SDCCH)
CIPHERING MODE (SDCCH)
TMSI REALLOCATION (SDCCH)

Phase 2 : MM signalling
Phase 8 : Ciphering
Phase 2 : MM signalling

SETUP (SDCCH)
ASSIGNMENT (SDCCH-FACCH)
CH.RELEASE
ALERTING & CONNECT (FACCH)
CONN. ACK. and MEASUREMENT
DISCONNECT & RELEASE
(FACCH)

Phase 3 : Basic assignment


Phase 4 : Release
Phase 2 : MM signalling
Phase 15 : Conversation
Phase 4 : Release

Signalling procedures are used during the 15 phases in a basic call


Certain parameters influence the setting up and the release of a call

You might also like