SOCIETY FOR ROBOTICS OF BOSNIA AND HERZEGOVINA

U BOS
TIK N
O

E&
O Z A ROB

H
ERCEG
TV

O
VI
NE DRUŠ

UNIVERSITY OF BIHAĆ INTERNATIONAL

FACULTY OF TECHNICAL BIOGRAPHICAL CENTRE
ENGINEERING CAMBRIDGE
BIHAĆ ENGLAND

7th INTERNATIONAL SCIENTIFIC CONFERENCE

ON PRODUCTION ENGINEERING

EGYPT, CAIRO
RIM 2009
DEVELOPMENT AND MODERNIZATION OF PRODUCTION

FINAL PROGRAMME
th th
September 26 - October 3 2009, Cairo, Egypt
 SPONSORS / POKROVITELJI
Ministry Council of B&H Vijeće ministara BiH
Academy of Science and Art of B&H Akademija nauka i umjetnosti BiH
Government of the Federation B&H Vlada Federacije BiH
Ministry of Science, Education and Culture Ministarstvo nauke, obrazovanja i kulture
of the Federation B&H Federacije BiH
Ministry of Industry and Energetical of the Ministarstvo energije, rudarstva i industrije
Federation B&H Federacije BiH
Foreign Trade Chamber of B&H Vanjskotrgovinska komora BiH
Chamber of Economy of the Federation B&H Privredna/gospodarska komora Federacije BiH
Government of the Una-Sana Canton Vlada Unsko sanskog kantona
Municipality of Bihać Općina Bihać

ORGANIZER / ORGANIZATOR COORGANIZER / SUORGANIZATOR

Society for Robotics of Bosnia and Herzegovina Chamber of Economy of B&H

Faculty of Technical Engineering Bihać Chamber of Economy of Federation B&H
International Biographical Centre, Cambridge Chamber of Economy of the Una-Sana Canton

Društvo za robotiku, Bosna i Hercegovina Vanjskotrgovinska komora BiH

Tehnički fakultet Bihać Privredna/gospodarska komora Federacije BiH
Međunarodni biografski centar, Kembridž Privredna komora Unsko sanskog kantona

ORGANIZING BOARD / PROGRAM BOARD /

ORGANIZACIONI ODBOR PROGRAMSKI ODBOR
D.Sc. Isak Karabegović, President D.Sc. Vlatko Doleček, President
D.Sc. Hossam Kamel Mahmoud D.Sc. Ismet Bišćević
D.Sc. Ismet Bišćević D.Sc. Branko Božić
D.Sc. Vlatko Doleček D.Sc. Fuad Ćatović
D.Sc. Milan Jurković D.Sc. Zijad Haznadar
D.Sc. Salah Eldien Omer D.Sc. Munir Jahić
D.Sc. Slobodan Šoja D.Sc. Milan Jurković
D.Sc. Stipo Buljan D.Sc. Isak Karabegović
D.Sc. Edina Karabegović D.Sc. Smail Klarić
M.Sc. Mehmed Mahmić D.Sc. Budimir Mijović
M.Sc. Ismet Pašalić D.Sc. Salah Eldien Omer
M.Sc. Husein Rošić D.Sc. Husein Pašagić
M.Sc. Samir Vojić D.Sc. Zinaid Raljević
M.Sc. Seid Žapčević D.Sc. Darko Ujević
Esad Bajramović, dipl.ing.
Eldin Okanović, dipl.ing.
Amel Džanić, dipl.ing.
Midhat Pašić, dipl.ing.
Ermin Husak, dipl.ing.
Damir Hodžić, dipl.ing.
 SCIENTIFIC BOARD / NAUČNI ODBOR

D.Sc. M. Jurković, President D.Sc. G. J. - Doleček (Mexico) D.Sc. S.E. Omer (Croatia)
D.Sc. P.R.Apeagyei (UK) D.Sc. R.A. Kahn (Bangladesh) D.Sc. S. Osterrieder (Germany)
D.Sc. S. Avdić (BiH) D.Sc. I. Karabegović (BiH) D.Sc. M. Pahl (Germany)
D.Sc. J. Balič (Slovenia) D.Sc. D. Katović (Croatia) D.Sc. H. Pašagić (Croatia)
D.Sc. Ž. Bazaras (Lithuania) D.Sc. A. Kecshkmethy (Germany) D.Sc. S. Pašić (BiH)
D.Sc. I. Bišćević (BiH) D.Sc. S. Klarić (BiH) D.Sc. Z. Pašić (BiH)
D.Sc. B.Božić (Croatia) D.Sc. A. Kovačević (UK) D.Sc. A. Pavić (Croatia)
D.Sc. S. Brdarević (BiH) D.Sc. V.K Kothari (India) D.Sc. M. Plančak (Serbia)
D.Sc. M. Brezočnik (Slovenia) D.Sc. I. Krucinska (Poland) D.Sc. I. Polajnar (Slovenia)
D.Sc. I. Budić (Croatia) D.Sc. M. Kulenović (BiH) D.Sc. P. Popović (Serbia)
D.Sc. P. Butala (Slovenia) D.Sc. K. Kuzman (Slovenia) D.Sc. W. Poppy (Germany)
D.Sc. G.Csaba (Romania) D.Sc. A. Luximon (Hong Kong) D.Sc. K.H. Reinck (Germany)
D.Sc. F. Ćatović (BiH) D.Sc. J.-S. Lee (Korea) D.Sc. M. Riaz (Pakistan)
D.Sc. R. Dahlberg (Sweden) D.Sc. Z. Maglajlić (BiH) D.Sc. Stjepan Risović (Croatia)
D.Sc. P. Dašić (Serbia) D.Sc. N. Majdandžić (Croatia) D.Sc. D. Schmid (Germany)
D.Sc. M. Daunys (Lithuania) D.Sc. V. Majstorović (BiH) D.Sc. G. Schneider (Germany)
D.Sc. K. Dems (Poland) D.Sc. I. Mamuzić (Croatia) D.Sc. R.P. Singh (India)
D.Sc. E. Dick (Belgium) D.Sc. M. Marić (BiH) D.Sc. M. Soković (Slovenia)
D.Sc. V. Doleček, (BiH) D.Sc. V. Marinković (Serbia) D.Sc. M. Stefanović (Serbia)
D.Sc. K.E. Ducket (USA) D.Sc. I. Martinek (Germany) D.Sc. R. Šelo (BiH)
D.Sc. H. Đukić (BiH) D.Sc. D. Martinović (BiH) D.Sc. M. Trajanović (Serbia)
D.Sc. S. Ekinović (BiH) D.Sc. J. Masajtis (Poland) D.Sc. Dž. Tufekčić (BiH)
D.Sc. H.A. El-Dessouki (Egypt) D.Sc. M. Math (Croatia) D.Sc. D. Ujević (Croatia)
D.Sc. A. Galović (Croatia) D.Sc. D. Mićević (Serbia) D.Sc. I.K. Varma (Croatia)
D.Sc. B. Grizelj (Croatia) D.Sc. T. Mikac (Croatia) D.Sc. B. Verble (BiH)
D.Sc. J. Grum (Slovenia) D.Sc. B. Mijović (Croatia) D.Sc. I. Vitez (Croatia)
D.Sc. A. Hadžipašić (BiH) D.Sc. J. Militky (Czech Republic) D.Sc. D. Vukojević (BiH)
D.Sc. Z. Haznadar (Croatia) D.Sc. A. Mišković (BiH) D.Sc. L. Wadsworth (USA)
D.Sc. E. Hodžić (Croatia) D.Sc. Š. Muhić (Denmark) D.Sc. N. Zaimović-Uzunović (BiH)
D.Sc. M. Jahić (BiH) D.Sc. A. Netravali (USA) D.Sc. D. Zhang (USA)
D.Sc. S. Jecić (Croatia) D.Sc. P. Niederer (Switzerland) D.Sc. M. Zlatar (BiH)
D.Sc. D. Jovanović D.Sc. M. Omanović (BiH) D.Sc. I. Žigić (BiH)

REVIEWERS BOARD / RECENZENTSKI ODBOR

D.Sc. Isak Karabegović, University of Bihać, Faculty of Technical Engineering (BiH)

D.Sc. Milan Jurković, University of Bihać, Faculty of Technical Engineering (BiH)
D.Sc. Vlatko Doleček, University of Sarajevo, Faculty of Mechanical Engineering (BiH)
D.Sc. Ismet Bišćević, University of Bihać, Faculty of Technical Engineering (BiH)
D.Sc. Salah-Eldien Omer, University of Bihać, Faculty of Technical Engineering (BiH)
D.Sc. Darko Ujević, University of Zagreb, Faculty of Textile Technology (Croatia)
D.Sc. Fuad Ćatović, University „Džemal Bijedić“ Mostar, Faculty of Civil Engineering (BiH)
D.Sc. Smail Klarić, University „Džemal Bijedić“ Mostar, Faculty of Mechanical Engineering (BiH)
D.Sc. Sead Pašić, University „Džemal Bijedić“ Mostar, Faculty of Mechanical Engineering (BiH)
D.Sc. Stjepan Risović, University of Zagreb, Faculty of Forestry (Croatia)
D.Sc. Budimir Mijović, University of Zagreb, Faculty of Textile Technology (Croatia)
D.Sc. Miran Brezočnik, University of Maribor, Faculty of Mechanical Engineering (Slovenia)
D.Sc. Himzo Đukić, University of Mostar, Faculty of mechanical engineering (BiH)
 SCHEDULE OF EVENTS / PROGRAM RADA

Sunday / Nedjelja, 27.09.2009

18-20 - Registration of participants / Registracija učesnika

Monday / Ponedjeljak, 28.09.2009

00 30
8 -9 - Registration of participants / Registracija učesnika

1000-1015 - Opening Ceremony / Otvaranje konferencije

1015-1200 - Invited lectures / Pozivna predavanja
1200-1245 - Coctail / Koktel

Hall / Dvorana 1 Hall / Dvorana 2

00 30
14 -15 - Section A / Sekcija A Section C+D / Sekcija C+D
(12 Lectures / 12 predavanja) (12 Lectures / 12 predavanja)

1600-1730 - Section A / Sekcija A Section E / Sekcija E

(12 Lectures / 12 predavanja) (10 Lectures / 10 predavanja)
00 30
18 -19 - Section A / Sekcija A Sections G+H / Sekcije G+H
(12 Lectures / 12 predavanja) (12 Lectures / 12 predavanja)
2100 - GALLA DINNER / SVEČANA VEČERA

Tuesday /Utorak, 29.09.2009

Hall / Dvorana 1 Hall / Dvorana 2

00 30
9 -10 - Section A / Sekcija A Section B+H / Sekcija B+H
(12 Lectures / 12 predavanja) (12 Lectures / 12 predavanja)
00 30
11 -12 - Section A+H / Sekcija A+H Section H / Sekcija H
(12 Lectures / 12 predavanja) (14 Lectures / 14 predavanja)
SCHEDULE OF PAPERS PRESENTATION / RASPORED IZLAGANJA
Monday / Ponedjeljak, 28.09.2009
00 15
10 -10 Opening Ceremony / Otvaranje konferencije

1015-1200 Invited lectures / Pozivna predavanja

Chairmen / Predsjedavajući : Isak Karabegović, Milan Jurković, Vlatko Doleček
Salah Eldien Omer, Fuad Ćatović
Gordana Jovanovic DIGITAL FILTERS: DESIGN AND APPLICATIONS
Dolecek
Salah Eldien Omer THE ROLE OF TIMBER ON THE DEVELOPMENT OF EGYPTIAN CULTURE
Zoran Jurkovic MODELLING AND OPTIMIZATION METHODS PREREQUISITE FOR
IMPLEMENTATION IN THE INTELLIGENT MACHINING SYSTEMS

00
14 -15
30
Section A / Sekcija A Hall / Dvorana
1
Chairmen / Predsjedavajući : Husein Pašagić, Damir Hodžić
Adis Fajić
Džemo Tufekčić RAPID PROTOTYPING DATA FORMATS
Alan Topčić
Enes Mujić
Fikret Alić THERMAL PVC BARRIERS IN ENGINEERING APPLICATIONS
Fuad Ćatovic
Sanel Buljubašić INTERACTION OF TECHNICAL DIAGNOSTICS WITH WATER
Hasan Avdić SUPPLY SYSTEMS
Džemo Tufekčić
Pašaga Muratović
Bahrudin Šarić DETERMINATION OF RESIDUAL STRESS DEPENDING ON THE
Fadil Islamović WELDING TECHNOLOGY
Adnana Muratović
Štefanija Klarić
Ivica Kladarić THE INFLUENCE OF AUSTENITIZING PARAMETERS ON THE GRAIN SIZE
Ivan Samardžić OF HYPOEUTECTOID STEEL
Željko Rosandić
Halima Hadžiahmetović
Elizabeta Hristovska MODELLING OF WELDED TRUSS JOINTS OF LATTICE GIRDER
Mirsad Čolić
Adil Muminović SOLID MODELING AND STRESS ANALYSIS OF A CRANE HOOK
Meho Gutić
Sabahudin Ekinovic
Edin Begovic NUMERICAL MODELING OF CHIP GENERATION PROCESS

Milenko Sekulić
Marin Gostimirović CALIBRATION OF CUTTING FORCE COEFFICIENTS IN FACE MILLING
Zoran Jurković
Pavel Kovač
Mãrieş Gh. R. E. STUDY REFERRING TO MANUFACTURING TECHNOLOGIES OF THE
Timbusz A. SURVIVAL KIT CASES MADE OF PLASTIC MATERIALS
Podolski T.
Dudziak M. SELECTION ASPECTS OF FINITE ELEMENTS IN CONTACT ANALYSIS
Kroczak J. OF AXIAL-SYMMETRICAL CONNECTIONS
Dudziak M.
Podolski T. SIMULATION OF METROLOGICAL FORM DEVIATIONS OF
Kroczak J. AXIALSYMMETRICAL ELEMENTS
Kolodziej A.
 1400-1530 Section C+D / Sekcija C+D Hall / Dvorana
2
Chairmen / Predsjedavajući : Gordana Jovanović Doleček, Branko Božić
Maya Lakhdara NUMERICAL MODELLING AND OPTIMIZATION OF SIGEC HBT FOR
Saϊda Latreche 0.13μM BICMOS TECHNOLOGY
Christian Gontrand
Lebaroud Abdesselam DIAGNOSIS OF SHORT-CIRCUIT FAULTS
Clerc Guy OF THE INDUCTION MACHINE
Gordana Jovanovic Dolecek
Isak Karabegovic SIMPLE METHOD FOR MULTIPLIERLESS FIR FILTER DESIGN
Vlatko Dolecek
Gordana Jovanovic Dolecek
ON DESIGN OF FIR MINIMUM-PHASE FILTERS
Vlatko Dolecek
M. Bouhouche MIXED-MODE SIMULATION AND PHASE NOISE ANALYSIS OF
S. Latreche RADIOFREQUENCY OSCILLATOR IN SIGE TECHNOLOGY
C. Gontrand
Jovanovic Relja SELF-INDUCED OSCILLATIONS AND RESONANSE IN THE MECHANICAL
Gavrilovic S. Branislav SYSTEM OF THE DIODE AND THIRISTORE LOCOMOTIVES OF
Vasiljevic Marko RAILWAYS IN THE BALKANS AND PREVENTION OF DRIVEN GEAR FAST
WEARING AND AXLE FRACTURES
Maja Prskalo RUBBER DAM - APLICATION OF NEW TECHNOLOGIES IN THE
Suad Špago REGULATION OF WATER LEVELS IN B&H
Fuad Ćatović
ENGINEERING GEOLOGY ROCK PARAMETERS FOR BLAST DESIGN
Branko Božić
ON THE HIGHWAY SPLIT-DUBROVNIK
APPLICATION OF DISCRETE MODEL BASED ON FEM, ANALYZING
Mirsad Tarić
AND TESTING OF COMPOSITE BRIDGE STRUCTURES ON TEST WEIGHT
Bujar Emra
Milić Milićević ANOTHER APPROACH TO CALCULATION OF CONCRETE
Dragoslav Stojić AGE COEFFICIENTS
Mirsad Tarić
Munir Jahić URBAN, REGIONAL AND MUNICIPAL ASPECTS IN SEWAGE
Aida Husetić SYSTEMS PLANNING
Suad Špago MANAGEMENT OF REHABILITATION OF A PIPE WATER SUPPLY NETWORK
Fuad Ćatović THROUGH APPLICATION OF FUZZY SETS

1600-1730 Section A / Sekcija A Hall / Dvorana

1
Chairmen / Predsjedavajući : Sead Pašić, Ante Cibalić
K. J. Walus
POSSIBILITIES OF VEHICLE MOVEMENT TRAJECTORY CHARACTERIZING
A. Lewandowski
WITH THE USE OF ACCELERATION SENSORS
K. Kedziora
M. Dudziak
Pejo Konjatić
Dražan Kozak STRUCTURAL INTEGRITY ASSESSMENT OF WELDED CYLINDRICAL TANK
Franjo Matejiček WITH TORISPHERICAL HEADS USED FOR UNDERGROUND STORAGE
Željko Ivandić OF PETROL
Todor Ergić
Josip Sertić
Ante Cibilic FAULTS DIAGNOSIS IN FUEL OIL SYSTEM OF MARINE PROPULSION
Radovan Antonic DIESEL ENGINE
Ivana Golub
Vitez Ivan DAMAGES RAILWAY RAILS CAUSED BY WELDING AND
Krumes Dragomir RESURFACING DEFECTS
Kladarić Ivica
Krešimir Grilec INFLUENCE OF AUSTEMPERING ON PARTICLE EROSION OF DUCTILE
Suzana Jakovljević CAST IRON
Gojko Marić
Lidija Ćurković
Vera Rede
Krešimir Grilec STUDY OF INDENTATION INDUCED CRACKS IN SIC CERAMICS
Marijo Lalić
Almir Bećirspahić OPTIMIZATION OF ENGINEERING PROCESSES IN GENETIC
Nermin Bišćević ALGORITHMS APPLICATIONS
Mirjana Rajčić-Vujasinović
Svetlana Nestorović
Ivana Rangelov CORROSION BEHAVIOR OF SINTERED CUAG4AT.% ALLOY
Vesna Grekulović
Slavko Simov
Svetlana Nestorović INFLUENCE OF ALLOYNG WITH Ag AND Pd ON ANNEAL HARDENING
Desimir Marković EFFECT IN SINTERED COPPER ALLOYS
Milan Vukčević
Mileta Janjić MEASUREMENT OF WELDING FORCE IN A FSW PROCESS
Nikola Šibalić
Nikola Šibalić MODELLING OF STRAIN AND KINEMATIC PARAMETERS AT
Mileta Janjić AXI-SYMMETRICAL DEFORMATION PROCESS IN OPEN DIES
Milan Vukčević
Svetislav Lj. Marković
Ivana Krsmanović REGENERATION OF A SHIP BODY AN ESSENTIAL REPAIR ACTION
Dojčilo Sretenović

00
16 -17
30
Section E / Sekcija E Hall / Dvorana
2
Chairmen / Predsjedavajući : Darko Ujević, Edin Fatkić
Danijela Paunovic
Gordana Colovic THE ANALYSIS OF SOME QUALITY METHODS IN GARMENT INDUSTRY
Goran Savanović
Slavica Bogović
Dubravko Rogale 3D SCANNING AND MEASURING OF HUMAN BODY OF DISABLED PERSON
Maja Tomšić
Canan Saricam SCENARIO PLANNING METHOD AND ITS APPLICABILITY WITH AN EXAMPLE
Fatma Kalaoglu FROM TURKISH TEXTILE AND APPAREL INDUSTRY
Sena Terliksiz
Fatma Kalaoğlu AIR AND WATER VAPOUR PERMEABILITY OF COTTON FABRICS
Ümmühan Şan
Edin Fatkić COMPRESSION PROPERTIES OF KNITTED FABRICS WITH INCORPORATED
Jelka Geršak ELASTOMER YARN
Alica Grilec
Darko Ujević BRAND MANAGEMENT IN THE TEXTILE AND CLOTHING INDUSTRY
Blaženka Brlobašić Šajatović
Darko Ujević
Blaženka Brlobašić Šajatović
Stjepan Risović DETERMINATION OF BODY DIMENSIONS OF ATHLETES IN THE
Ksenija Doležal REPUBLIC OF CROATIA
Renata Hrženjak
T. Pokrajčić
Omer Demirović
Ana Marija Grancarić MODIFIED PET FABRIC FOR PROTECTION OF UV AND IR RADIATION
Anita Tarbuk
Irena Šabarić DESCRIPTION OF THE TERMS FROM FORMAL DRESS OVER SMART
Nina Modronja Breyer CASUAL TO BUSINESS CASUAL
Maja Vinković
Darko Ujević
S. Petrak CONVENTIONAL AND COMPUTER-CONTROLLED METHODS IN
Dubravko Rogale ANTHROPOMETRY UNDER CONSIDERATION
Ksenija Doležal
Blaženka Brlobašić Šajatović

00
18 -19
30
Section A / Sekcija A Hall / Dvorana
1
Chairmen / Predsjedavajući : Saud Hasanbegović, Peter Butala

Mileta Janjić
Milan Vukčević TEMPERATURE MEASUREMENT IN FSW PROCESS
Nikola Šibalić
Isad Šarić
Adil Muminović IMPLEMENTATION OF CAD/CAM/CAE SYSTEMS
Nedžad Repčić
Suad Hasanbegović
THE STRESS INTENSITIES
Izet Bijelonja
Fadil Islamović
Pašaga Muratović
BEND TESTING OF THE WELDED JOINTS
Dženana Gačo
Fatka Kulenović
Isak Karabegović A RELIABILITY OF MOTION OF AN INDUSTRIAL ROBOT END GRIPPER
Sanel Gredelj
Milan Jurković
Sanel Gredelj THE RELIABILITY OF THE PRODUCTION OF TECHNOLOGICAL PROCESS
Nermin Bišćević
BRIEF VIEW OF KEY STAGES TECHNOLOGICAL PRODUCTION
Jozef Kuba PREPARATION WITH ASPECT TO AUTOMATION TREATMENT OF
DIGITAL INFORMATION
Lebaroud. A DETECTION AND DIAGNOSIS OF INDUCTION MACHINE FAULTS BY TIME
Medoued. A FREQUENCY REPRESENTATION
Clerc. G
Seid Žapčević TOWARDS SELF-LEARNING AUTONOMOUS WORK SYSTEMS
Peter Butala
Viera Poppeová
Juraj Uríček
Peter Šindler DESING OF PARALLEL KINEMATIC STRUCTURES COMPONENTS
Ján Ďurica AND SUBSYSTEMS
Vladimír Bulej
Rudolf Rejda
Lutvo Haznadarević
Jusuf Kevelj GRINDING PROCESS MODELING
Viktor Baričak
Lutvo Haznadarević
OUTPUT DATA USAGE FOR ADAPTIVE CONTROL BY GRINDING PROCESS
Ante Mišković

1800-1930 Section G+H / Sekcija G+H Hall / Dvorana

2
Chairmen / Predsjedavajući : Ismet Biščević, Mersud Ferizović, Ermin Husak
BUSINESS REENGINEERING AND COMPUTERIZATION OF COMPANIES AS
Mirela Kljajic Dervic
A COMPETITIVE ADVANTAGE ON THE MARKET

Kurtanović Senada FLEXIBLE MANAGEMENT MODEL OF THE POLITICS OF DEPRECIATION

WITHIN MANAGEMENT CHANGES OF THE COMPANY
Marek Potkány OUTSOURCING AND MAKE OR BUY DECISION MAKING TASKS
Jusuf Kumalić THE ROLE AND IMPORTANCE OF ISLAMIC BANKING IN THE
DEVELOPMENT OF BOSNIA AND HERZEGOVINA
Ferizovic Mersud FINANCIAL CRISIS
Ferizovic Naida
Elvira Ćatić-Kajtazović CONSUMERS' VIEWS AND PREFERENCES
WITH ANALYSIS OF EXAMPLES OF UNA SANA CANTON
Ismet Biscevic THE NECESSITY OF OCCUPATION NOMENCLATURE AND ITS
COMPABILITY WITH MANAGAMENT CLAIMS OF HUMAN RESOURCES
COOPERATION WITH BIG COMPANIES AND STRATEGY REPOSITION OF
Amir Bišćević SMALL AND MIDDLE ENTERPROSIES, SURVIVAL IMPERATIV IN THE
CONDITIONS OF ECONOMICAL CRISIS
Ruzena Králiková PRODUCT LIFE CYCLE MANAGEMENT APPLICATIONS
Renata Miháliková
Hanadija Omanović
Alma Mićijević
RUISTE AS A NATURAL RESOURCE OF MEDICINAL HERBS
Fuad Ćatović
Aida Sukalic
Đulsa Bajramović BORACKO LAKE- THE CURRENT STATE AND SUSTAINABLE MAINTENANCE
Emina Ademović
Đulsa Bajramović
Fuad Ćatović EU GUIDELINES AND QUALITY OF THE DRINKING WATER IN B&H
Maida Đapo

Tuesday / Utorak, 29.09.2009

00
9 -10
30
Section A / Sekcija A Hall / Dvorana
1
Chairmen / Predsjedavajući : Ahmed Kovačević, Aida Husetić
Ahmed Kovacevic
Nikola Stosic COMPUTATIONAL FLUID DYNAMICS IN SCREW MACHINES
Elvedin Mujic
Ian K Smith
Ibrahim Čačković
Amir Arnautović THE ANALYSE OF SUPPLEMENTARY LOADINGS OF ROAD STRUCTURES
Suvada Durmić DEPENDING ON VEHICLE MOVING
Šefik Suljić
D. Sprečić DESIGN OF THE COMPUTER MODEL OF ROTARY CRANES MECHANISM
H. Bukvić WITH FEEDBACK CONTROL
I. Marinović
D. Sprečić
OPTIMAL SYNTHESIS OF A STRAIGHT LINE MECHANISM BY METHOD
T. Čampara
OF EVOLUTIONARY ALGORITHM
H. Bukvić
Fatka Kulenović
Fadil Islamović LOCATION MODELS AND APPLICATIONS
Dženana Gačo
Husein Pašagić QUANTITATIVE METHODS IN LOGISTICS
Ivan Presečki
Dženana Gačo
Zijah Burzić
Fadil Islamović BEHAVIOUR OF HIGH ALLOY STEEL X20 IN VARIABLE LOAD CONDITIONS
Fatka Kulenović
Ramo Halilagić
Ion Cârpean
Ion Sporea ELABORATION OF THE CASTING TECHNOLOGY FOR THE MOVING
Vasile Băeţan PARTS OF BRAKING MACHINE
Remus Boboescu
Ramo Halilagić EXPERIMENTAL DETERMINATION OF THE FORCE OF FRICTION BETWEEN
Milan Đudurović PNEUMATIC AND ROADWAY IN THE PASSENGER MOTOR VEHICLE
Dženana Gačo
Sefik Behrem MODELING BLADE OF AXSIAL IMPELLER
Daut Denjo
Nermina Zaimović Uzunović
Safet Isić GROUND VIBRATION MEASUREMENT IN LABORATORY SPACES
Ibrahim Badžak
Vlatko Doleček
AN ESTIMATION OF LARGE DEFORMATION
Safet Isić
BASED ON LINEAR ANALYSIS
Avdo Voloder
00
9 -10
30
Section B+H / Sekcija B+H Hall / Dvorana
2
Chairmen / Predsjedavajući :Budimir Mijović, Salah Eldien Omer
THE EXISTING AND REQUIRED WORKFORCE AND TRAINING IN THE
Ismar Alagić WOODPROCESSING INDUSTRY FBiH AS PRECONDITIONS FOR
COMPETITIVENESS OF WOOD PROCESSING INDUSTRY IN B&H
Salah-Eldien Omer WOOD PELLETS FOR USE AS TOMORROW FUEL
Minka Ćehić MODERN MATERIALS FOR WOODEN CONSTRUCTIONS
Salah - Eldien Omer
Atif Hodžić EXPERIMETAL RESEARCH AND THERMODYNAMIC MODELING PROCESS
Husein Rošić FACTORS IN WOOD DRYING
Damir Hodžić
Ekrem Nezirević
Isak Karabegović EXPERIMENTALLY MEASURING OF THE CONTACT
Salah Eldien Omer PRESSURE ON AXISYMMETRICAL PRESSINGS
Milan Jurković
Adela Gluhalić
Atif Hodžić PERSPECTIVE PRODUCTION BIOMASS FROM WOOD WASTE IN
Esad Bajramović BOSNIA AND HERZEGOVINA
Miljenko Haiman COST-EFFECTIVE TIMBER STRUCTURES
Budimir Mijović 3D FURNITURE VISUALIZATION
Budimir Mijović
MODELED BENT LAMINATED FURNITURE
Salah Eldien Omer
Lejla Riđanović
MOLECULAR BIOLOGY OF DISEASE RESISTANCE IN PLANTS
Sanel Riđanović
E. Zlomušica
S. Sijarić
M. Behmen ANALYSIS OF VERTICAL WIND PROFILES AT MALI GRAD MOSTAR SITE
E. Sarač
K. Šehbajraktarević
Osman Perviz DETERMINING THE CONDITIONS THE MOST IMPORTANT PROCESS
Ifet Šišić PARAMETERS CONTACT DRYING OF PAPER USING SEMIFLUIDITY MODELS
Semira Hotić

00
11 -12
30
Section A+H / Sekcija A+H Hall / Dvorana
1
Chairmen / Predsjedavajući : Mehmed Mahmić, Edina Karabegović, Amel Džanić
Razija Begić
Sead Pašić ANALYSES OF WELDING FUME CHEMICAL COMPOSITION
Boris Meštrić GENERATED IN SMA WELDING OF Cr-Ni STEELS
Jurica Alešković
Zijad Mustedanagić PROCESS MODELING AND IDENTIFIKACION FOR USE IN ONLINE
Nedjeljko Perić SELF-TUNING PID CONTROLLERS
Isak Karabegović ROBOTIC ASSEMBLY USING MACHINE VISION AND CAD INTEGRATION
Edin Mustafić
Bernadin Ibrahimpašić SECURITY OF KMOV AND LUC CRYPTOSYSTEMS
Karabegović Edina
Jurković Milan MODELING AND OPTIMIZATION OF AXIAL FORCE IN TUBE
Brezočnik Miran HYDROFORMING PROCESS
Mahmić Mehmed
Samir Vojić
MODELLING THE ROBOT WELDING PROCESS
Isak Karabegović
Karabegović Isak APPLICATION OF MECHATRONIC SYSTEM IN SIMULATION OF
Husak Ermin MANUFACTURING PROCESS
Milan Jurković
Armin Čolić THE NEW TENDENCIES IN THE DEVELOPMENT OF MACHINING
Miran Brezočnik AND PRODUCTION SYSTEMS
Mehmed Mahmić
THE DRIVE SYSTEM WITH STEP BY STEP
Livinti Petru
MOTOR FOR THE PLAYING CHESS ROBOT
Amel Džanić
WEB 2.0 SERVICES AND THEIR WIDESPREAD APPLICATION
Jasmin Ćosić
Smail Klarić EFFECTS BY APPLYING TOOLS AND METHODS OF THE
Senada Pobrić QUALITY MANAGEMENT
Marijana Blažić
Željko Stanić
Zlatko Jurac LACTOSE INTOLERANCE
Bojan Matijevic
Josip Čulig
Miroslav Horvatić

Hall / Dvorana
1100-1230 Section H / Sekcija H
2
Chairmen / Predsjedavajući : Safet Brdarević, Zoran Jurković, Samir Vojić
Fikret Veljović
Nezira Kovač ERGONOMIC RESEARCH ACTIVITIES OF BELIVERS AND ATHEISTS WHO
Sanja Drljević ARE EMPLOYED IN THE SAME FIELD
Fahira Veljović
Sabahudin Jašarević
Safet Brdarević EXPERIENCES OF B&H ORGANIZATIONS IN THE PHASE OF
Slavko Dolinšek INTRODUCTION OF QUALITY SYSTEM
Darko Petković
Jasmina Pašagić Škrinjar MAJOR GUIDELINES OF PRODUCTION LOGISTICS AS SCIENCE
Antun Presečki AND AS ACTIVITY
Djulsa Bajramovic THE LEVEL OF DISSOLVED SUGAR IN HERZEGOVINA TOBACCO
Alma Leto DEPENDING FROM THE TYPE OF SOIL
Pavol Gejdoš E-LEARNING TOOL HOW TO INCREASE QUALITY IN
EDUCATIONAL PROCESS
Jasminka Klarić THE CONTENT OF LEAD (Pb) ALONG THE ROADS IN THE MOSTAR REGION
Jovan Vučinić
Snježana Kirin LIVING ENVIRONMENT AS THE IMPLEMENTATION OF THE POLITICAL SYSTEM
Zoran Vučinić
Silvija Vitner Marković
Ivan Pukšar YIELD MANAGEMENT IN HOTEL SECTOR
Anna Šatanová
Martina Merková QUALITY AT THE UNIVERSITY
Katarína Hanáčeková
SUCCESSIVE SINUSOIDAL MOTIONS OF OPEN KINEMATIC CHAINS FOR
Pavel Sinilkov
TRANSPORTATION OF MOBILE SELF-PROGRAMMING ROBOT-TECHNICAL
COMPLEXES
Jusuf Midžić MESOSCALE PROGNOSTIC NUMERICAL ATMOSPHERE MODELS
Rajfa Musemić APPLICATION FOR LOCATING AREAS WITH RESPECTABLE WIND
POTENTIAL IN BOSNIA-HERZEGOVINA
Ervin Lumnitzer
Miroslav Badida USING OF GIS IN THE FIELD OF ENVIRONMENTAL RESEARCH
Ruzena Králiková
Monika Bilová
Djulsa Bajramovic IDENTIFICATION AND PROTECTION OF MEDICINAL HERBS AS A NATURAL
Ahmed Dzubur RESOURCE OF THE WIDER REGION OF THE CITY OF MOSTAR
Jasmina Aliman
MODELING ORDER LOADING USING PALLET STACKABILITY CONCEPT
Ahmed Ibrahim Hassan Aly
IN A PRODUCTION WAREHOUSE TO MINIMIZE TOTAL TRAVEL TIME
Stipo Buljan
Zoran Jurković OPTIMIZATION OF THE RESULTS OF DEEP DRAWING EXPLOSION BY
Milan Jurković USING THE TAGUCHI METHOD
Himzo Đukić

INSTRUCTIONS FOR AUTHORS AND PARTICIPANTS

The conference fee is 200 Euro and it should be paid after paper has been accepted for
publishing to:
RAIFFEISEN BANKA dd, BiH, Bihać
Count number of bank 1610350000000042, SWIFT CODE: RZBABA2S
Count number for payment: 502012000, User: UDRUZENJE DRUSTVO ZA ROBOTIKU -
SOCIETY FOR ROBOTICS, with remark “Registration for RIM 2009” and name of Author.

Conference will be held in the Hotel Grand Pyramids in Giza, Cairo (www.grandpyramidshotel.com).

For all other informations please contact Conference organizer

Faculty of Technical Engineering Bihac
Tel.: +387 226 271, +387 226 273
Fax: +387 37 226 270, +387 226 273
E-mail: [email protected] or [email protected]
Web: www.rim-2009.ba