Scribd
Upload
16 views4 pages

Aztech Dsl605Ew: Reconfiguring The Wireless Access Point

Uploaded by

Asim Rafiq Janjua

Food Manufacture Technology

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

Aztech Dsl605Ew: Reconfiguring The Wireless Access Point

Uploaded by

Asim Rafiq Janjua
16 views4 pages
Food Manufacture Technology

Original Title

Aztech

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

Food Manufacture Technology

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
16 views4 pages

Aztech Dsl605Ew: Reconfiguring The Wireless Access Point

Uploaded by

Asim Rafiq Janjua
Food Manufacture Technology

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 4

AZTECH DSL605EW

4-PORT ADSL2/2+ WIRELESS-G MODEM ROUTER

RECONFIGURING THE WIRELESS ACCESS POINT

A. CONFIGURING THE DSL605EWS WIRELESS ACCESS POINT


1. Connect your computer to any of the Ethernet Ports 1-3 of the DSL605EW
2. Open your Internet browser
3. On the address box, type http://192.168.1.1

Note:
If theres a prompt for login, try the following

Username: admin
Password: admin
or
Username: admin
Password: (no password)
4. On the main page, click on Wireless

5. On the left panel menu, click on Setup, this will open the Wireless Setup page

PRODUCT ENGINEERING AND SUPPORT


Singapore

AZTECH TECHNOLOGIES PTE LTD

Frequently Asked Question

Page 2 of 4

6. On the Wireless Setup page, you can change the Primary SSID, Primary SSID will be the wireless
network name which you will see when you scan for wireless networks from your computer

7. Ensure that there is a check for Enable AP then click on Apply followed by Restart Access Point

8. On the left panel menu, click on Security, this will open the Wireless Security page

PRODUCT ENGINEERING AND SUPPORT


Singapore

AZTECH TECHNOLOGIES PTE LTD

Frequently Asked Question

Page 3 of 4

9. Click to select WEP from the security options


10. Ensure that you have a check mark on the Enable WEP Wireless Security
11. On the Authentication Type, ensure that Open is selected

12. There will be 4 boxes, fill the 1st box with 10 digits (combination of numbers from 0-9 and
letters A-F only), cipher for the first box should be set to 64 bits

13. Click on Apply followed by Restart Access Point to temporarily save the settings
14. To save the settings to the device click on Save Settings

PRODUCT ENGINEERING AND SUPPORT


Singapore

AZTECH TECHNOLOGIES PTE LTD

Frequently Asked Question

Page 4 of 4

B. CONNECTING TO THE WIRELESS ACCESS POINT FROM YOUR COMPUTER


1. Restart your computer
2. Ensure that the computers wireless device is switched on
3. Scan for the available wireless networks from your computer, look for your own wireless
network, connect to your own network and input the required wireless password, which youve
set earlier

Note:

1. If your computer is already connected to the wireless network and cannot access
the Internet, make sure that the IP address and DNS Server address are obtained
automatically

For
a.
b.
c.
d.

Windows XP:
Open Control Panel > Network Connection
Right click on the Wireless Network Connection and click on Properties
Click on Internet Protocol TCP/IP and click on Properties
Ensure that the following are selected
 Obtain an IP address automatically
 Obtain DNS server address automatically

For
a.
b.
c.
d.

Windows Vista or Windows 7:


Open Control Panel > Network and Sharing center
Click on Manage Network Connection or Change Adapter Settings
Right click on Wireless Network Connection and click on Properties
Click on Internet Protocol Version 4 (TCP/IPv4) and click on Properties
 Obtain an IP address automatically
 Obtain DNS server address automatically

PRODUCT ENGINEERING AND SUPPORT


Singapore

AZTECH TECHNOLOGIES PTE LTD

You might also like