Scribd
Upload
39 views

Post 2

This program creates a login system with different forms for different user types. If the user enters "admin" they will see form2, and if they enter "staff" they will see form3. The document provides 10 steps to create the login system in C# using Visual Studio, including creating 3 forms, adding labels and buttons, and coding the login functionality.

Uploaded by

Mowski Kowski
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
39 views

Post 2

This program creates a login system with different forms for different user types. If the user enters "admin" they will see form2, and if they enter "staff" they will see form3. The document provides 10 steps to create the login system in C# using Visual Studio, including creating 3 forms, adding labels and buttons, and coding the login functionality.

Uploaded by

Mowski Kowski
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

POST #2

This program create a Log in System


that loads different forms for every user
type
and if the user type "admin" then the
form2 will load, then if the user type
"staff" the form3 will load
Presented By:
Rodolfo I. Marzo
BSIT B-1

Step 1. Open the Visual Studio 2012 or C# Application

Step 2. click new Project

Step 3. Select Visual C# and then select Windows Forms


Application after that click ok

Edit the
name
Of your
project
here into
log in
system

Step 4. Create a Form1 like this As your first form.

Select a control that you want to edit


Its properties

Step 5.Add two forms as your Form2 and Form3. just right click the
highlighted word logInSystem, then select Add after that select Windows form
and then just enter and no need to rename.
To Add form3 just do it again the instruction in step 2.

2nd

1st
3rd
3rd

2nd

1st Select
this

2nd click this

You can rename


this

Step 6.design your Form2 and Form3 just like this.


Form2 is almost the same as Form3 except the label1, just
rename
the label1 in Form3 to "User:Staff" the rest is the same.

Step 7.Here's the coding portion, double click the


button1 in Form1.
then copy or type the code below:

Continue
coding
here

Step 8.Here's the second coding portion,


double click the button1 or log in button in
then copy the code below:
Form2

Step 9.the same coding instruction in step 5,double click the


button1 in Form3 then copy the code below:

Outpu
t

Step 10. F5 to run the program and the output is


look like this.
username: admin password: admin or
Username: staff password: staff

Outpu
t

Reference of the program:

Thank you
I hope
You learn a lot

You might also like