Yas SHANGHAI AILE PETROLEUM EQUIPMENT MFG.CO.,LTD. Vapor Recovery System Products° PUIG srici ace rereoieuneaurnenrnesco.tro, ZYQ-200 Series Of Vapour Recovery Nozzles AILE ZYQ-200 series of vapour recovery nozzles are ‘suitable for full electronic vapour/volume control dispensers. ‘The fuel-despensing nozzle with an automatic safety shut off for wet-hose use with electrical operated petrol dispensing pumps for the ‘active’ vapour recovery. Each nozzle has been subject to stringent tests before leaving the factory and validated by the applied markings and date code. AILE ZYQ-200 is supplied for connecting to the AILE-SSI hose. > Materials: Body: aluminium alloy ‘Seals: vito ‘SPOUT: brass with nickel coated ‘GUARD: aluminium of PAGS Lever: electrophoresis coated Covers: Soff PVC. > Packag Ne Weight: 1.8 kalpc Gross Weight: 2 kgipe £55x34x32.20m/Case of 10pC » Ordering Specifications: Product Int thea > Features & nefits: ‘¢ APPLICATION: For all normal gasoline fuels - leaded of Unleaded. Not suitable for water and hydrous liquids, alcohols, solvents, viscous oils and diesel fuels. ‘¢ EQUPMENT: TRISTOP=venture controlled automatic shutoff ¢safety (protection when titing and fling) + optionally wth pressure controlled safety shut-off ‘ SPECIFICATION: Automatic nozzle ZYO-200 series for ‘motorcar refueling up to 45L/min, with Vapour recovery for working pressure from 0.Sbar up to 3.Sbar, at ambient temperatures from -20°C up to +55°C. ‘+ AVAILABLE COLORS: Red, Yellow, Blue, Green, Black * THREE POSTION HOLD-OPEN DEVICE: control of hold-open mechanism means easy setting of flow rate Warnin: Using foreign objects to hold open automatic nozzles could resut in failure to shutoff and personal injury. ute mar —_—_‘taottegtrd “Type > AILE ZVQ-200 Series ‘ ; BORE omc 2 , ae ee . = a ~_¢ 2¥0-2008, cet! zva2008 a aa zva-2006. PILE surscen ace peraoceun eournenrursco.tr0 AILE-SSI Vapor Hose > For Stage Il Vacuum Assist Systems where a pump in» COAX hose assembly for dispensers with active vapour the dispenser pulls the gasoline vapors away fromthe recovery. vehicle fill pipe during fueling. Wire braid construction _Available hose colours: black, green, blue, yellow, red. provides excellent kink resisiance and low computer Low Temperature (LT) versions available Low Temperature creep. Bending Force / Flexibility With increasing cold petro! pump hoses become stiffer and more difficult to handle, particularly when they are empty or > Features & Benefits: filed with Diesel which causes litle swelling. When filed with gasoline the swelling of the tube acts as plasticizer ‘* TUBE: Nitrile synthetic rubber (ORS) improving tha cold flexibility. ‘COVER: Chemivic synthetic rubber (ORS), The EN 1360 specifies that a new petrol pump hose must thermoplastic outer with textile reinforcement and ‘not require a higher bending force than 180 .N. when wire helix bending the hose at - 30° C in a normed device. Our ‘# REINFORCEMENT: Braided (1) steel wire standard qualities regularly require clearly lower bending “TEMPERATURE! 40" Fo 140" F(C40" Cto60" c) __‘foF¢8S°GOOD YEAR” hoses (Low Temperature”) re cod fevblo up to - 40" Celsius. They meet all requirements of EN 1360. Wy > Ordering Specifications: oduct # Inlet thread Outi ameter Length Hose by YOuG-36 _Msax1.5 YyouG-400 M24 x15 yauG-500M34x1.5 yauG-600 Ma4x1.5 > fAILE SSI Vapor Hose = ae 34x48 Max 4.5 Maax1.5 Maa. 360M so0cm 00cm 00cm _—=s ‘TUE ‘Good Year 00d Year Good Yeat G00 Year 1 L 57 state com° PILE sors sce rereoieu eournentureco.tro YQLD-01 COAX Safety Break ZYQ-200 Vapor Proportional Valve > against drive-off incidents. For assembly between vapour > recovery nozzle and COAX hose assembly. Separates at axial or angular pullof forces less than 150 kg ‘Again and again motorists leave the nozzie inserted in the filer neck of their cars when pulling off the forecourt Most crive-away incidents are not published ~ but they happen every day, due to absentmindness, rush - e. g.after a petrol theft, and occasionally vandalism. AILE COAX break-away couplings prevent dispensers from being pulled over and fuel spills. In other words: They save costs. >» Body: aluminium alloy Seals: viton > Features & Benefit: * INTEGRATED SWIVEL: The AILE COAX Safety Breaks have an integrated swivel which substitutes the standard swivel. This saves costs, and there is only a minimal increase in weight and size of the nozzle. ‘¢ OPTIMAL FIT FOR THE ZVA SYSTEM: AILE COAX Safety Breaks are well sulted to our ZYQ-200 Vapor nozzles, as they maintain the excellent flow rates. A large number of thread connections are available. NO THROWAWAY MENTALITY: Our Safety Breaks are reusable. After a separation the coupling can be re-assembled by qualified service personnel. ¢ EASY INSTALLATION: Existing dispensers without Safety Breaks can be easily retrofitted > > > AILE YQLD-01 COAX Safety Break > ZYQ-200 Vapor Proportional Valve is used for AILE ZYQ- 200A Vapor Recovery Nozzies. Its easiled to adjust vapor recovery rate. AIL€ SSI Vapor Hose r YQFL-01 COAX adaptor AILE YQFL-01 COAX adaptor (splitter valve) for petro! pumps.itis a cast aluminum hose adapter used to connect a non vapor-ready gasoline dispenser to a coaxial Healy stage Il vapor recovery hose. It has tapered BSPT threads ‘on the inlet and straight threads on the outlet side. Ordering Specifications: Product# _Inletthread_——Outlet ameter Materia YOFLO1-801_NPTSIA M34X1.5 Aluminum YOFL01-802 —-NPTI™ 96X45 Aluminum YOFL01-803 BSPTaid 4x4. Aluminum YorL01-80¢ —_BSPTI™ 26x18 Aluminum AIL YQFL-01 COAX adaptor wate focom 58. PAD LE sussci are rernoueum eoument wro.c0..70 VRP-76L Dispener Mounted Vacuum Pump For Stage|| Vapor Recovery > VRP-76L dispenser mounted vacuum pump able to operate > Features: with all type of nozzle, hose, breakaway and adapter. * High durability as it has cast iron.casing and able to work ‘under extreme tough condition in various temperature and ' climate; mishandling last long running without lubricant. ‘¢ Easy mount in all type of dispenser + Simple and easy installation driven by pulley & belt and + Driven by suction type dispenser motor powered by motor form dispen ser. + No electronic parts + One pump one dispenser to give you maximum capacity * Durable & high efficiency and efficiency. + Less maintenance cost, * Easy for maintenance and big saving for long term, © Able to handle 2 nozzies in simultaneous + No electrical and electronic parts, ‘© Compatible to all vapor recovery syste ‘ Simple mechanism using only vane and rotor to pull * Full service parts support vacuum and minimize cost of spare parts. ‘¢ Designed for UL and ATEX standard > Sp Efficiency: 1/8 HP RPM: 1800 rpm Capacity: 80 LPM Inlet outiet dia: 1/2 ‘averse ‘Temperature Range: -35° to 65°C > Installation Instruction: (One pupm is required to mout on a bracket and attached on the frame of the dispenser. Calculation is required to work out the dimension of pulley for VRP-76L pump It is then driven by a belt eatended form dispenser motor and fuel pumping unit ower Diameter of vapor pump pulley related to speed and pulley size of dispenser motor VRP-76L pump will give you optimum, performance of vacuum 90” W.C. At 1800 rpm. Therefore to ‘work out diameter of VRP-76L pulley will be 1800 rpm divided Pumping unit by rpm of motor and multiply the diameter of motor pulley > AILE VRP-76L ©° PILE sors ate rereoizu eournentureco.tro DR-030 Dispener Mounted Vacuum Pump For Stage|l Vapor Recovery > DR-030 dispenser mounted vacuum pump able to operate * Features: with all type of nozzle, hose, breakaway and adapter > Benefits: ‘¢ Easy munt in all type of dispenser ‘ Driven by AC electric motor in single phase and three phase power supply No electronic board or control device require + Full aluminum die casting construction * Durable & high efficiency Less maintenance cost “ Able to handle 3 nozzles in simultaneous * Compatible to all vapor recovery system '¢ Full service parts support ‘* Designed for UL and ATEX standard > Specifications: Horsepower: 1/5 HP. Voltage: 220V single phase / 380V three phase Hertz: 50/60Hz RPM, 1450 RPM Maxinum Capacity: 120 LPM InletOutlet diameter : 3/4 6 Ambient Temperature: ~35°C to 65°C > Installation Instruction: One pump isrequired to mount on a bracket and attached ‘on the frame of the dispenser. Wiring direct connect to power supply in conjunction with nozzle hook signal to turn ‘on the motor. A simple circuit board with relay control to handle the nozzie hook up signal is required. R030 pump will work at optimum Vacuum level 90" W.C. and will produce max capacity of vapor return in 120 Ipm ‘when dispenser operating 3 nozzles in simultaneous. > AILE DR-030 ‘ High durability as it is a full aluminum die cast construction land able to work under extreme tough conditions in various temperature and climate; mishandling, last long running without lubricant, ‘ Simple and easy installation driven by AIC power in tphase 220 or phase 380V. One pump one dispenser to guve you maximum capacity and efficiency. ‘¢ Easy for maintenance and big saving for long term. ‘¢ No external electrical and electronic parts, Simple mechanism using only vane and rotor to pull ‘vacuum and minimize cost of spare parts. pler wea focon 6D° PILE serpin sce rereoieun eournentureco.tro VRVP Vapor Recovery Vacuum Pump > AILE brand VRVP Series gasoline vapor recovery vacuum » Features: ump is a relatively consummate pump for gasoline vapor Teoovery system, it can work between the temperature of minus 40 degrees and 60 degrees, and can be used alone oF as a part of the system in gas stations. In the Gasoline vapor recovery system, the pump is mainly used for collecting gasoline vapor so to lower the pollution and save resources. As the environment pollution goes from bad to worse and the requirement for efficient use of resources increases persistently, gasoline vapor recovery vacuum ump will be used extensively in this ares. > Electrical connection of appliance with 3~electrical motor Black—_e 12 | smo bom 2 3 kelly @® conductor Now: Tee a wresin cls 248-10 and 20-59 41) The Bive, Black, Brown wires connect for 380 Voltage power. 2) The Kelly one connects the ground. Blue —____» U1 Motor cable > Alle vRVP ‘¢ The characteristics of VRVP Series gasoline vapor recovery vacuum pump as follows: ¢ There fixed a pump shaft that is driven by the electromotor and is connected by a brace to a pole that link to a piston Which can move up and down freely in a bush inside the pump. ‘* Above the piston, there is a seat assembly which includes a ‘hon return inlet valve and outlet valve for the gasoline vapor, land the above mentioned valves are linked to the pump inlet and outlet chamber respectively. What we need to do is to connect the pump inlet chamber with a pipe to the vapor recovery adapter, and connect the adapter to the refueling nozzle with a soft, double wall tube, Ordering Specifications: Mode! ‘vRvP-100 vvave.53 Power iw) ‘370 370 Suction Capacity (Lim) 100 83 Vacuum Pressure (Mpa) 209 209 Rotation Speed (RPM ) 2a00 2000 votage(¥) 380 10% 380 10% Woignt (Ko) 16 15 Dimension mm) 501651205 31041654205, Ex Marking Exot Exolar3 x Coniicate Number GYB081008, ‘Gyeoet008 61 wamateseconOur Sincerely and innovated service, BMT tel at el cs eS USS COR Ce a UT at Or uC er