*AWSSTANDARDSLIBRARYPUBLICATIONORDER FORM

The following is a list of publications offered as part of the AWS Standards eLibrary.
Please contact the AWSMembership Department at (800) 443-9353, ext. 259, or (305) 443-9353, ext. 259 for questions on how to
become an AWSSustaining Company Member.
Rev. 5/24/14

Publication Number
A1.1

Rev
01

Title
METRIC PRACTICE GUIDE FOR THE WELDING INDUSTRY

A2.4

12

STANDARD SYMBOLS FOR WELDING, BRAZING AND NONDESTRUCTIVE EXAMINATION (AWS A2.4)

A3.0

10

A4.2M/A4.2

06

A4.3

93R

A4.4M

01

A4.5M

12

q
q

A5.1/A5.1M

12

STANDARD WELDING TERMS AND DEFINITIONS; INCLUDING TERMS FOR ADHESIVE BONDING,
BRAZING, SOLDERING, THERMAL CUTTING, AND THERMALSPRAYING
CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE DELTA FERRITE CONTENT OF AUSTENITIC AND
DUPLEX FERRITIC-AUSTENITIC STAINLESS STEEL WELD METAL
STANDARD METHODS FOR DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF
MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDING
STANDARD PROCEDURES FOR DETERMINATION OF MOISTURE CONTENT OF WELDING FLUXES AND
WELDING ELECTRODE FLUX COVERINGS
Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables
in a Fillet Weld
SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING

A5.01M/A5.01
A.02/A5.02M

13
07

FILLER METAL PROCUREMENT GUIDELINES

SPECIFICATION FOR FILLER METAL STANDARD SIZES, PACKAGING, AND PHYSICAL ATTRIBUTES

A5.2

07

SPECIFICATION FOR CARBON AND LOW ALLOY STEEL RODS FOR OXYFUEL GAS WELDING

A5.3/A5.3M

99

q
q
q
q
q
q

A5.4/A5.4M
A5.5/A5.5M
A5.6
A5.7
A5.8/A5.8M
A5.9/A5.9M
A5.10/A5.10M

12
06
08
07
11
12
12

SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ELECTRODES FOR SHIELDED METAL ARC
WELDING
SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
COVERED COPPER & COPPER ALLOY ARC WELDING ELECTRODES
SPECIFICATION FOR COPPER AND COPPER ALLOY BARE WELDING RODS AND ELECTRODES
SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING
SPECIFICATION FOR BARE STAINLESS STEEL WELDING ELECTRODES AND RODS
SPECIFICATION FOR BARE ALUMINUM AND ALUMINUM-ALLOY WELDING ELECTRODES AND RODS

A5.11/A5.11M

10

A5.12/A5.12M

09

q
q
q
q

A5.13
A5.14/A5.14M
A5.15
A5.16/A5.16M
A5.17/A5.17M

10
11
90R
13
97

SPECIFICATION FOR NICKEL AND NICKEL ALLOY WELDING ELECTRODES FOR SHIELDED METAL ARC
WELDING
SPECIFICATION FOR TUNGSTEN AND TUNGSTEN ALLOY ELECTRODES FOR ARC WELDING AND
CUTTING
SPECIFICATION FOR SURFACING ELECTRODES FOR SHIELDED METAL ARC WELDING
SPECIFICATION FOR NICKEL AND NICKEL-ALLOY BARE WELDING ELECTRODES AND RODS
SPECIFICATION FOR WELDING ELECTRODES AND RODS FOR CAST IRON
SPECIFICATION FOR TITANIUM AND TITANIUM-ALLOY WELDING ELECTRODES AND RODS
CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING, SPECIFICATION FOR

A5.18/A5.18M

05

SPECIFICATION FOR CARBON STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING

q
q
q

A5.19
A5.20/A5.20M
A5.21
A5.22

92R
05
11
12

A5.23/A5.23M
A5.24/A5.24M
A5.25/A5.25M

11
14
97R09

A5.26/A5.26M

97R09

SPECIFICATION FOR MAGNESIUM ALLOY WELDING ELECTRODES AND RODS

CARBON STEEL ELECTRONICS FOR FLUX CORED ARC WELDING
SPECIFICATION FOR BARE ELECTRODES AND RODS FOR SURFACING
SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR FLUX CORED ARC WELDING AND
STAINLESS STEEL FLUX CORED RODS FOR GAS TUNGSTEN ARC WELDING
LOW ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING
SPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM-ALLOY WELDING ELECTRODES AND RODS
SPECIFICATION FOR CARBON AND LOW ALLOY STEEL ELECTRODES AND FLUXESFOR ELECTROSLAG
WELDING
SPECIFICATION FOR CARBON AND LOW ALLOY STEEL ELECTRODES FOR ELECTROGAS WELDING

A5.28/A5.28M

05

SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING

q
q
q
q
q

A5.29/A5.29M
A5.30/A5.30M
A5.31
A5.32/A5.32M
A5.34/A5.34M
A5.36/A5.36M

10
07
12
11
13
12

A9.5
A10.1M

13
07

SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING
SPECIFICATION FOR CONSUMABLE INSERTS
SPECIFICATION FOR FLUXES FOR BRAZING AND BRAZE WELDING
Welding Consumables -- Gases and Gas Mixtures for Fusion Welding and Allied Processes
SPECIFICATION FOR NICKEL-ALLOY ELECTRODES FOR FLUX CORED FOR ARC WELDING
Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored
Electrodes for Gas Metal Arc Welding.
Guide for Verification and Validation in Computation Weld Mechanics
SPECIFICATION FOR CALIBRATION AND PERFORMANCE TESTING OF SECONDARY CURRENT SENSING
COILS AND WELD CURRENT MONITORS USED IN SINGLE-PHASE AC RESISSTANCE WELDING

B1.10
B1.11
B2.1
B2.2
B2.3/B2.3M
B2.4

09
00
14
10
12
12

q
q
q
q

q
q
q
q
q
q
q
q
q

GUIDE FOR THE NONDESTRUCTIVE EXAMINATION OF WELDS

GUIDE FOR THE VISUAL EXAMINATION OF WELDS (AWS B1.11)
SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION
BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION
SPECIFICATION FOR SOLDERING PROCEDURE AND PERFORMANCE QUALIFICATION
SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION FOR
THERMOPLASTICS

q
q

B4.0
B5.1
B5.2

07
13
01

B5.4
B5.5
B5.9
B5.14
B5.15
B5.16
B5.17
C1.1M/C1.1
C1.4M/C1.4
C1.5
C2.16/C2.16M
C2.18

05
11
06
09
10
06
08
12
09
09
02
93

C2.19M/C2.19
C2.20/C2.20M
C2.21M/C2.21
C2.23M/C2.23

13
02
03
03

C2.25/C2.25M

12

SPECIFICATION FOR THERMAL SPRAY FEEDSTOCK - SOLID AND COMPOSITE WIRE AND CERAMIC RODS

C3.2M/C3.2
C3.3

08
08

C3.4M
C3.5
C3.6/C3.6M
C3.7
C3.8M/C3.8
C3.9M/C3.9
C3.11M/C3.11
C4.2/C4.2M
C4.3/C4.3M
C4.4/C4.4M

07
07
08
11
11
09
11
09
07
07

C4.5M
C4.6M

12
12

C5.10/C5.10M
C5.3
C5.5/C5.5M
C5.7
C6.1
C6.2/C6.2M
C7.1M/C7.1
C7.2
C7.3
C7.4
D1.1/D1.1M
D1.2/D1.2M
D1.3/D1.3M
D1.4/D1.4M
D1.5M/D1.5
D1.6
D1.7
D1.8
D1.9
D3.5
D3.6M
D3.7
D3.9
D8.1M
D8.6
D8.7M
D8.8M
AWS/SAE D8.9M

03
00
03
00
89
06
13
10
99
08
10
08
08
11
10
07
10
09
07
93

D8.14M/D8.14

08

q
q

D9.1M/D9.1
D10.4
D10.6/D10.6M

12
86
00

STANDARD METHOD FOR EVALUATING THE STRENGTH OF BRAZED JOINTS

RECOMMENDED PRACTICES FOR THE DESIGN, MANUFACTURE, AND EXAMINATION OF CRITICAL
BRAZED COMPONENTS
SPECIFICATION FOR TORCH BRAZING
SPECIFICATION FOR INDUCTION BRAZING
SPECIFICATION FOR FURNACE BRAZING
SPECIFICATION FOR ALUMINUM BRAZING
SPECIFICATION FOR THE ULTRASONIC EXAMINATION OF BRAZED JOINTS
SPECIFICATION FOR RESISTANCE BRAZING
Specification for Torch Soldering
RECOMMENDED PRACTICES FOR SAFE OXYFUEL GAS CUTTING TORCH OPERATION
RECOMMENDED PRACTICES FOR SAFE AND OXYFUEL GAS HEATING TORCH OPERATION
RECOMMENDED PRACTICES FOR HEAT SHAPING AND STRAIGHTENING WITH OXYFUEL GAS HEATING
TORCHES
UNIFORM DESIGNATION SYSTEM FOR OXYFUEL NOZZLES
THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND
QUALITY TOLERANCES
RECOMMENDED PRACTICES FOR SHIELDING GASES FOR WELDING AND CUTTING
RECOMMENDED PRACTICES FOR AIR CARBON ARC GOUGING AND CUTTING
RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING
RECOMMENDED PRACTICES FOR ELECTROGAS WELDING
RECOMMENDED PRACTICES FOR FRICTION WELDING
SPECIFICATION FOR FRICTION WELDING OF METALS
RECOMMENDED PRACTICES FOR ELECTRON BEAM WELDING
RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING, AND DRILLING
PROCESS SPECIFICATION FOR ELECTRON BEAM WELDING
PROCESS SPECIFICATION AND OPERATOR QUALIFICATION FOR LASER BEAM WELDING
STRUCTURAL WELDING CODE-STEEL
STRUCTURAL WELDING CODE-- ALUMINUM
STRUCTURAL WELDING CODE-SHEET STEEL (AWS D1.3)
STRUCTURAL WELDING CODE-REINFORCING STEEL
BRIDGE WELDING CODE
STRUCTURAL WELDING CODE - STAINLESS STEEL (AWS D1.6)
GUIDE FOR STRENGTHENING AND REPAIRING EXISTING STRUCTURES
STRUCTURAL WELDING CODE - SEISMIC SUPPLEMENT
STRUCTURAL WELDING CODE - TITANIUM
GUIDE FOR STEEL HULL WELDING
12 SPECIFICATION FOR UNDERWATER WELDING
GUIDE FOR ALUMINUM HULL WELDING
Specification for Classification of Weld-Through Paint Primers
SPECIFICATION FOR AUTOMOTIVE WELD QUALITY - RESISTANCE SPOT WELDING OF STEEL
AUTOMOTIVE RESISTANCE SPOT WELDING ELECTRODES
RECOMMENDED PRACTICES FOR AUTOMOTIVE WELD QUALITY - RESISTANCE SPOT WELDING
SPECIFICATION FOR AUTOMOTIVE FOR AUTOMOTIVE WELD QUALITY - ARC WELDING OF STEEL
RECOMMENDED PRACTICES FOR TEST METHODS FOR EVALUATING THE RESISTANCE SPOT WELDING
BEHAVIOR OF AUTOMOTIVE SHEET STEEL MATERIALS
SPECIFICATION FOR AUTOMOTIVE AND LIGHT TRUCK COMPONENTS WELD QUALITY - ALUMINUM ARC
WELDING
SHEET METAL WELDING CODE
WELDING AUSTENITIC CHROMIUM - NICKEL STAINLESS STEEL PIPING AND TUBING
RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING OF TITANIUM PIPING AND TUBING

D10.7M/D10.7
D10.8

08
96

GUIDE FOR GAS SHEILDED ARC WELDING OF ALUMINUM AND ALUMINUM ALLOY PIPE
RECOMMENDED PRACTICES FOR WELDING OF CHROMIUM-MOLYBDENUM STEEL PIPING AND TUBING

D10.10/D10.10M
D10.11M/D10.11
D10.12M/D10.12

99
07
00

RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING

RECOMMENDED PRACTICES FOR ROOT PASS WELDING OF PIPE WITHOUT BACKING
GUIDE FOR WELDING MILD STEEL PIPE

q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q

q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q

q
q
q
q
q
q

04
10
13
05
05
07
12

STANDARD METHODS FOR MECHANICAL TESTING OF WELDS

SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTORS
SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTOR SPECIALISTS AND WELDING
INSPECTOR ASSISTANTS
SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES
SPECIFICATION FOR THE QUALIFICATION OF WELDING EDUCATORS
SPECIFICATION FOR THE QUALIFICATION OF WELDING SUPERVISORS
SPECIFICATION FOR THE QUALIFICATION OF WELDING SALES REPRESENTATIVES
SPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERS
SPECIFICATION FOR THE QUALIFICATION OF WELDING ENGINEERS
SPECIFICATION FOR THE QUALIFICATION OF WELDING FABRICATORS
RECOMMENDED PRACTICES FOR RESISTANCE WELDING
SPECIFICATION FOR RESISTANCE WELDING OF CARBON AND LOW-ALLOY STEELS
SPECIFICATION FOR THE QUALIFICATION OF RESISTANCE WELDING TECHNICIAN
GUIDE FOR THERMAL-SPRAY OPERATOR QUALIFICATION
GUIDE FOR THE PROTECTION OF STEEL WITH THERMAL SPRAYED COATINGS OFALUMINUM AND ZINC
AND THEIR ALLOYS AND COMPOSITES
Specification for the Application of Thermal Spray Coatings to Machine Elements for OEM and Repair
SPECIFICATION FOR THERMAL SPRAYING ZINC ANODES ON STEEL REINFORCED CONCRETE
SPECIFICATION FOR THERMAL SPRAY EQUIPMENT ACCEPTANCE INSPECTION
SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM,
ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL

D10.13/D10.13M

01

q
q
q

D10.14M/D10.14
D10.18M/D10.18
D11.2
D14.1/D14.1M

10
08
89
05

D14.3/D14.3M
D14.4/D14.4M
D14.5
D14.6/D14.6M
D14.7/14.7M

10
12
09
12
05

D14.8
D14.9
D15.1/D15.1M
D15.2

09
13
12
13

D16.1M/D16.1
D16.2M/D16.2
D16.3M/D16.3
D16.4M/D16.4
D17.1
D17.2/D17.2M
D17.3/D17.3M

04
07
09
05
10
AMD1
13
10

D18.1

09

D18.3/D18.3M

05

F1.1M

06

F1.2M

13

F1.3

06

SPECIFICATION FOR WELDING OF AUSTENITIC STAINLESS STEEL TUBE AND PIPE SYSTEMS IN
SANITARY (HYGIENIC) APPLICATIONS
SPECIFICATION FOR WELDING OF TANKS, VESSELS, AND OTHER EQUIPMENT IN SANITARY (HYGIENIC)
APPLICATIONS
METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED
PROCESSES
LABORATORY METHOD FOR MEASURING FUME GENERATION RATE AND TOTAL FUME EMISSION OF
WELDING AND ALLIED PROCESSES
A SAMPLING STRATEGY GUIDE FOR EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT

q
q

F1.5M
F1.6
F2.3M

03
03
11

METHODS FOR SAMPLING AND ANALYZING GASES FROM WELDING AND ALLIED PROCESSES
GUIDE FOR ESTIMATING WELDING EMISSIONS FOR EPA AND VENTILATION PERMIT REPORTING
SPECIFICATION FOR USE AND PERFORMANCE OF TRANSPARENT WELDING CURTAINS AND SCREENS

F3.2M/F3.2
F4.1

01
07

G1.1M/G1.1
G1.10M

06
01

G1.2M/G1.2

99

VENTILATION GUIDE FOR WELD FUME

RECOMMENDED SAFE PRACTICES FOR THE PREPARATION FOR WELDING AND CUTTING OF
CONTAINERS AND PIPING
GUIDE TO ULTRASONIC ASSEMBLY OF THERMOPLASTICS
GUIDE FOR THE EVALUATION OF HOT GAS, HOT GAS EXTRUSION, AND HEATEDTOOL BUTT
THERMOPLASTIC WELDS
SPECIFICATION FOR STANDARDIZED ULTRASONIC WELDING TEST SPECIMEN FOR THERMOPLASTICS

G1.6

06

q
q
q
q
q
q

G2.1M/G2.1
G2.3M/G2.3

12
12

G2.4/G2.4M
G2.5/G2.5M
J1.1M/J1.1
ALL PUBLICATIONS

07
12
13

q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q

q
q
q
q
q

RECOMMENDED PRACTICES FOR THE BRAZING OF COPPER TUBING AND FITTINGS FOR MEDICAL GAS
SYSTEMS
Guide for Multipass Orbital Machine Pipe Groove Welding
GUIDE FOR WELDING FERRITIC/AUSTENITIC DUPLEX STAINLESS STEEL PIPING AND TUBING
GUIDE FOR WELDING IRON CASTINGS
SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING
EQUIPMENT
SPECIFICATION FOR WELDING EARTHMOVING AND CONSTRUCTION EQUIPMENT
SPECIFICATION FOR WELDED JOINTS IN MACHINERY AND EQUIPMENT
SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS
SPECIFICATION FOR WELDING OF ROTATING ELEMENTS OF EQUIPMENT
RECOMMENDED PRACTICES FOR SURFACING AND RECONDITIONING OF INDUSTRIAL MILL ROLLS
Standard Methods for the Avoidance of Cold Cracks
Specification for the Welding of Hydraulic Cylinders
RAILROAD WELDING SPECIFICATION - CARS AND LOCOMOTIVES
RECOMMENDED PRACTICES FOR THE WELDING OF RAILS AND RELATED RAIL COMPONENTS FOR USE
BY RAIL VEHICLES
SPECIFICATION FOR ROBOTIC ARC WELDING SAFETY
GUIDE FOR COMPONENTS OF ROBOTIC AND AUTOMATIC ARC WELDING INSTALLATIONS
RISK ASSESSMENT GUIDE FOR ROBOTIC ARC WELDING
SPECIFICATION FOR THE QUALIFICATION OF ROBOTIC ARC WELDING PERSONNEL
SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS
SPECIFICATION FOR RESISTANCE WELDING FOR AEROSPACE APPLICATIONS
SPECIFICATION FOR FRICTION STIR WELDING OF ALUMINUM ALLOYS FOR AEROSPACE APPLICATIONS

SPECIFICATION FOR THE QUALIFICATION OF PLASTICS WELDING INSPECTORS FOR HOT GAS, HOT
GAS EXTRUSION , AND HEATED TOOL BUTT THERMOPLASTIC WELDS
GUIDE FOR THE JOINING OF WROUGHT NICKEL-BASED ALLOYS
Guide for the Joining of Wrought Solid Solution Austenitic Stainless Steels
GUIDE FOR THE FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS
Guide for the Fusion Welding of Zirconium and Zirconium Alloys
Specification for Resistance Welding Controls
Please mark here if you want the entire library.