Scribd
Upload
25 views

C Bot

The LearnCbot circuit board is designed for educational purposes, with 3 options to suit different objectives. It is compatible with all Arduino boards and allows users to learn programming in C through exercises involving motors and sensors. The card contains 9 Grove connectors to interface with Grove modules and future Didel sensors. The Kidule compatible LearnCbot is well-suited for teaching C as an intermediate step between simple Kidules and more complex robots with wheels and sensors. An alternative breadboard option works with any microcontroller providing access to 7 bidirectional pins.

Uploaded by

LotteDomine
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

C Bot

The LearnCbot circuit board is designed for educational purposes, with 3 options to suit different objectives. It is compatible with all Arduino boards and allows users to learn programming in C through exercises involving motors and sensors. The card contains 9 Grove connectors to interface with Grove modules and future Didel sensors. The Kidule compatible LearnCbot is well-suited for teaching C as an intermediate step between simple Kidules and more complex robots with wheels and sensors. An alternative breadboard option works with any microcontroller providing access to 7 bidirectional pins.

Uploaded by

LotteDomine
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

http://www.didel.

com/

[email protected]

www.didel.com/diduino/LearnCbotOptions.pdf

LearnCbot options
The LearnCbot circuit is populated according to 3 educational objectives.
The LearnCbot Arduino shield is compatible
with all Arduino boards. It allows a thorough
understanding of programming in C through
a set of exercises that insist also on the
realtime aspect: handling motors and
sensors is the base of all applications.
See

Most Grove modules are too primitive,


documentation is naive, but the concept is
good. The LearnCbot card has 9 grove
connectors, quite enough for testing Grove
modules and future Didel sensor and display
modules.

The Kidule compatible LearnCbot is perfect


for teaching C, as a transition between the
motivating simple kidules used with
beginners and robots with wheels and
sensors not so easy to program.

The breadboard LearnCbot option


can be used with any
microcontroller that provides
access to 7 bidirectionnal pins (5
outputs, 2 inputs) Pinguino,
Raspberry, Arm, etc.
Picture shows a MSP430 under the
control of CSS or Energia on the
LaunchPad.

jdn 140121

You might also like