Scribd Logo
Upload

Welcome to Scribd!

  • 68 views

    Parapet Screen

    Uploaded by

    Kilaru Hareesh
    The document provides calculations to analyze the structural integrity of a GRC screen for a mall extension in Dubai. Key dimensions and material properties are given. Bending, shear, deflection and load calculations are shown to verify the screen and support brackets are structurally sufficient.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Parapet Screen

    Uploaded by

    Kilaru Hareesh
    68 views7 pages
    The document provides calculations to analyze the structural integrity of a GRC screen for a mall extension in Dubai. Key dimensions and material properties are given. Bending, shear, deflection and load calculations are shown to verify the screen and support brackets are structurally sufficient.

    Original Description:

    Design of parapet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides calculations to analyze the structural integrity of a GRC screen for a mall extension in Dubai. Key dimensions and material properties are given. Bending, shear, deflection and load calculations are shown to verify the screen and support brackets are structurally sufficient.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    68 views7 pages

    Parapet Screen

    Uploaded by

    Kilaru Hareesh
    The document provides calculations to analyze the structural integrity of a GRC screen for a mall extension in Dubai. Key dimensions and material properties are given. Bending, shear, deflection and load calculations are shown to verify the screen and support brackets are structurally sufficient.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 7

    PROJECT:

    DUBAI MALL FASHION AVENUE EXTENSION


    LOCATION: DUBAI, UAE
    SUBJECT:
    GRC SCREEN
    I
    FIG. 1 ELEVATION

    FIG. 2 SECTION

    FIG. 3 FRONT VIEW


    2024 mm

    1680

    3236

    II

    GIVEN DATA
    GRC UNIT WEIGHT =
    MODULUS OF ELASTICITY (E) =
    FOR THE SCREEN
    GRC THICKNESS =
    LENGTH =
    WIND PRESSURE =
    Wp =
    TRIBUTARY AREA = 1680x 2024=
    LESS AREA OF OPENINGS =
    NET EFFECTIVE AREA Ag =
    NET AREA FACTOR
    =

    2000 kg/m
    6895 MPa
    35 mm
    2024 mm
    2.19
    3400320
    3.400
    2094411
    2.094
    1.306
    1.31/3.40

    kPa
    mm
    m
    mm
    m
    m
    0.384

    FOR THE SECTION OF THE SCREEN


    two size of the screen section

    N. Axis
    c = 18.33

    35

    ave b = 35
    see at section bb

    35

    ave b = 25
    COMPUTE THE M.I. (I) OF SECTION
    Width of the panel
    = 1300 mm
    Effective width after reduction of the openings
    = 806 mm
    Effective moment of Inertia
    3
    = 806 x 35
    12
    4
    = 2,879,771 mm

    Wp =

    -3.16 kPa
    -3160 Pa

    Trib. B =

    Effective wind pressure

    = Wp x Net area factor


    = 3.16 x 0.384
    =
    -1.214 kPa

    Wind load per unit length

    = -2.04
    = 2.04

    1.68 M

    kN/m

    ASSUME AS A BEAM

    2024
    V = w L/2

    2064.48 N

    192560

    M =wL
    10
    max M =

    835,701.5

    835,702 N-mm

    M = wL
    10

    BENDING
    fb =

    fb =

    Mc
    I
    835701.504 x 18.33
    2,879,771
    5.32 N/mm

    FOR ALLOWABLE BENDING STRESS OR FLEXURAL =

    900 psi
    6.2 N/mm

    fb IS LESS THAN ALLOWABLE, HENCE OK


    SHEAR
    fv =

    fv =
    fv =

    V
    A
    2064.48
    8575
    0.241 N/mm

    A = (35 x 35)x2 + (25 x 35) x 7


    8575 mm
    OK

    FOR ALLOWABLE SHEAR STRESS=

    400 Psi
    2.758 N/mm

    fv IS LESS THAN ALLOWABLE, HENCE OK

    DEFLECTION
    Max. Deflection

    Allowable Deflection

    =
    =
    =
    =

    wl4
    384 EI
    4.49 mm
    span/200
    10.12 mm

    Maximum deflection is less than allowable. HENCE OK

    CHECK FOR THE MIDDLE SUPPORT STEEL BRACKET

    WT. = 720 N

    TRIBUTARY AREA = 1520 x 976


    AT =
    1483520 mm
    LESS OPENINGS =
    851224
    Ag =
    632296 mm
    COMPUTE FOR THE WEIGHT OF THE SCREEN AND BORDER AS PER TRIBUTARY AREA
    SCREEN :
    VOL =

    TOT VOL=

    Ag x THK
    632296 x 35
    22130360 mm
    0.02213036 m

    BORDER
    VOL =

    0.03657036 M

    WEIGHT OF GRC = VOLUME x UNIT WEIGHT


    0.03657036 x 2000
    WT. =
    73.14072 kg x 9.81
    717.51 N
    say WT. =

    720 N

    Ag x HEIGHT
    9500 x 1520
    14440000 mm
    0.01444 m

    BUT Ag = 50x95x2
    9500

    CHECK FOR THE SHEAR ON THE BOLT


    fv =

    P
    A

    USE 10 mm BOLT
    A=
    78.54 mm
    720
    78.54
    9.17 N/mm

    fv =

    OK

    ALLOWABLE Fv = 0.4Fy = 0.4(275)=

    110 N/mm

    SAFE

    CHECK FOR THE BENDING ON THE ANGLE ( 50x50x6mm )


    FOR THE SECTION OF ANGLE 50x50x6mm

    A1

    y1

    Y
    a1

    y2
    a2

    COMPUTE FOR THE CENTROID


    A1 =
    A2 =
    Atot =

    50 x 6 =
    44 x 6 =

    y1 =
    3 mm
    y2 =
    28 mm
    BY AREA MOMENT METHOD
    Atot ( Y ) = A1y1 + A2y2
    564 Y =
    300(3) + 264(28)
    Y=
    14.70

    300 mm
    264 mm
    564 mm

    A2

    a1= Y- y1=
    a2= y2- Y=

    11.70
    13.30

    COMPUTE FOR THE I(MOMENT OF INERTIA)


    I = bh + Aa
    12
    I1 =
    I1 =

    50 (6) + 300(11.7)
    12
    4
    41981.93753 mm

    I2 =

    6 (44) + 264(13.3)
    12
    4
    89276.01992 mm

    I total =

    4
    131257.9574 mm

    FOR BENDING
    fb =

    Mc
    I
    100080 x 14.7
    131257.9574

    fb =
    11.21 N/mm
    ALLOW. Fb = 0.66 Fy = 0.66(275) =
    FOR DEFLECTION
    def =

    P L
    3EI
    720( 139)
    3(200000)

    def =

    WHERE :
    M = 720(139)
    100080 N-mm
    c=Y=
    14.70 mm
    OK
    181.5 N/mm

    WHERE :
    P = WT. =
    L=
    E=

    720 N
    139 mm
    200000 N/mm

    131258

    0.025 mm

    ALLOW DEFLECTION = L / 240 =

    OK, LESS THAN THE ALLOWABLE. SAFE!


    0.58 mm

    NOTE : FOR THE OTHER STEEL BRACKET SUPPORT, USE THE PREVIOUS DESIGN :

    You might also like