Scribd
Upload
351 views1 page

0160e - Welding Procedures Data Sheet

This document is a welding procedure data sheet that provides specifications for a welding process, including: - The welding process, shielding gas, positions, process mode, joint type, penetration, backing, and joint configuration - Materials to be welded including their specifications, thickness or diameter, and any special requirements - Filler materials including trade name, classification, and group - Welding parameters such as thickness, weld size, layer, pass number, welding process, wire feed speed, current, voltage, polarity, welding speed, gas flow rate, and heat input rate - Requirements for heat treatment, preheat and interpass temperatures - Space for remarks and authorization by the company

Uploaded by

Amanpreet Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
351 views1 page

0160e - Welding Procedures Data Sheet

This document is a welding procedure data sheet that provides specifications for a welding process, including: - The welding process, shielding gas, positions, process mode, joint type, penetration, backing, and joint configuration - Materials to be welded including their specifications, thickness or diameter, and any special requirements - Filler materials including trade name, classification, and group - Welding parameters such as thickness, weld size, layer, pass number, welding process, wire feed speed, current, voltage, polarity, welding speed, gas flow rate, and heat input rate - Requirements for heat treatment, preheat and interpass temperatures - Space for remarks and authorization by the company

Uploaded by

Amanpreet Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

CWB Form 160E/99-1

WELDING PROCEDURE
DATA SHEET

WPDS NO.:
DATE:

Rev.:

Company Name:

Ref. Standards:

Address:

Ref. WPS:

Welding Processes:
Shielding Gas Type:

Yes

Pulsed:

No

Positions:
Process Mode:
Joint Type:
Penetration:
Backing:

Yes

No

Joint Configuration & Pass/Layer Sequence

Manual
Butt

Semi-Auto
Tee
Corner

Complete

Partial

Machine
Lap

Auto
Edge
Fillet

ETT=

Material:

Backgouging:

Pulsed:

Thickness:

Yes

Method:

No

Depth:

Electrode Extension:
Nozzle Diameter(s):
Flux Classification:
Tungsten Electrode:

Type:

Dia.:

Cleaning Procedures

CSA W186 Rebar


Splice Type:

Direct Splice
Indirect Splice
Rebar to Structural Member Only

Lap Splice

Identification of Base Material (for CSA W186 indicate carbon equivalent, max. phosphorus & sulphur content)
Part

Specification & Grade

Thickness or Dia.

Special Requirements

I
II
Identification of Filler Material
Process

Trade Name

Classification

Group

Filler Treatment

Welding Parameters
Thickness
(
)

Weld
Size/
ETT

Layer

Pass
Welding Dia.
Number Process
(

Heat treatment :
Preheat min:

Wire Feed Speed Current


(
)
A

Volt
V

Current
Welding
Polarity Speed
(
)

Burn-Off Gas Flow Heat Input


Rate
Rate
(
)
(
)
(
)

CWB Acceptance

Company Authorization

Interpasstemp.max.:
Interpasstemp.min.:

Remarks:

Date:

You might also like