Scribd Logo
Upload

Welcome to Scribd!

  • 133 views

    Design Calculation

    Uploaded by

    Kilaru Hareesh
    This document provides specifications for installing granite panels using steel support angles. It analyzes the load calculations and structural capacity for angles of size 130x40x5, 90x40x5, and 150x40x5 to support granite panels weighing 185N and 363N. Bolt shear capacity for 8mm bolts is also checked. All designed elements are found to have sufficient capacity based on allowable stress limits. The conclusion recommends angle sizes based on granite panel dimensions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Design Calculation

    Uploaded by

    Kilaru Hareesh
    133 views10 pages
    This document provides specifications for installing granite panels using steel support angles. It analyzes the load calculations and structural capacity for angles of size 130x40x5, 90x40x5, and 150x40x5 to support granite panels weighing 185N and 363N. Bolt shear capacity for 8mm bolts is also checked. All designed elements are found to have sufficient capacity based on allowable stress limits. The conclusion recommends angle sizes based on granite panel dimensions.

    Original Description:

    Granite Panel Installation

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for installing granite panels using steel support angles. It analyzes the load calculations and structural capacity for angles of size 130x40x5, 90x40x5, and 150x40x5 to support granite panels weighing 185N and 363N. Bolt shear capacity for 8mm bolts is also checked. All designed elements are found to have sufficient capacity based on allowable stress limits. The conclusion recommends angle sizes based on granite panel dimensions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    133 views10 pages

    Design Calculation

    Uploaded by

    Kilaru Hareesh
    This document provides specifications for installing granite panels using steel support angles. It analyzes the load calculations and structural capacity for angles of size 130x40x5, 90x40x5, and 150x40x5 to support granite panels weighing 185N and 363N. Bolt shear capacity for 8mm bolts is also checked. All designed elements are found to have sufficient capacity based on allowable stress limits. The conclusion recommends angle sizes based on granite panel dimensions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 10

    PROJECT:

    LOCATION:
    SUBJECT :

    GRANITE PANEL INSTALLATION

    DATE :

    SEP. 28, 2015

    GIVEN DATA :
    A

    FOR GRANITE PANEL(790X305X30)


    1
    UNIT WEIGHT =
    2600 Kg/M
    2
    PANEL SCREEN DIMENSION
    a)
    HEIGHT =
    790 mm
    WIDTH =
    305 mm
    THICKNESS =
    30 mm
    3
    VOLUME =
    L x W x Thk
    790x305X30
    VOLUME = Vol=
    7228500 mm
    or Vol =
    0.0072285 M
    4

    WEIGHT = WT.= UNIT WEIGHT x VOLUME


    WT. =
    2600 x 0.0072285
    18.79 Kg x 9.81
    184.37012 N
    say WT. =
    185 N

    TYPICAL PANEL
    130x40x5

    PAGE

    TYPICAL PANEL
    90x40x5

    FOR STEEL
    1
    YIELD STRESS Fy =
    2
    3

    UNIT WEIGHT =
    STRESS ALLOWABLES
    SHEAR STRESS ( Fv )
    BENDING ( Fb)
    DEFLECTION ( def )

    275 MPa or N/mm


    40000 psi
    7850 Kg/M

    0.4Fy
    0.66Fy
    L
    240
    4
    E (MODULUS OF ELASTICITY) =
    CALCULATION

    since Fy < 65000 psi


    for none structural member
    200000 MPa or N/mm

    DESIGN FOR STEEL ANGLE (130x40x5)


    Dead Weight of Granite
    Weight of angle
    Total laod

    185 N
    40 N
    225 N

    The above laod is sharing by two angles


    Therefore load on angle=

    PAGE

    Ga = 40

    112.5 N

    AT SECTION xx
    x

    130
    D

    CAPACITY OF ANGLE
    I=
    b h
    12
    (130)(5)
    12

    b=
    h=
    c = 5/2 =

    130
    5
    2.5

    4
    1354.167 mm
    CHECK FOR BENDING, SHEAR AND DEFLECTION

    fb =

    Mc
    I

    BENDING
    fb =

    but M = Wt. ( s )
    M = 113(130)
    M=
    14625 N-mm

    14625 x 1.5
    1354.1667

    fb =

    27 N/mm

    ALLOW. Fb = 0.66Fy = 0.66(275)=


    2

    fv =

    SHEAR

    fv =
    fv =

    181.5 N/mm

    P
    A

    WHERE P = WT. = 113 N


    A = SECT. AREA = 130(5)
    A=
    650 mm

    113
    650
    0.174 N/mm

    ALLOW. Fv = 0.4Fy = 0.4(275)=


    3

    OK, LESS THAN ALLOW. Fb

    OK, LESS THAN ALLOW. Fv


    110 N/mm

    DEFLECTION
    def =

    Pl
    WHERE :
    3EI
    (113x130x130x130)
    3(200000) 1354.1667
    L=
    P = WT. =
    0.306 mm

    ALLOW. DEF = L/240 = 130(240) = 0.5


    0.5416667
    mm
    mm
    THE def < ALLOW. DEF, OK

    PAGE

    130 mm
    113 N

    CHECK ON THE ANCHOR BOLTS


    DL ( WT.)

    113 N

    Try use 8 mm () bolt

    SHEAR DUE WT. ONLY


    fv (bolts) = Rb
    As

    but As =

    but Wt. = Rb

    Rb =
    Rb =

    (d)
    4
    As = 3.141592654( 8 )
    4
    As =
    50.27 mm

    113
    1
    113 N

    fv (bolts) =

    805
    113
    50.27
    fv (bolts) =
    2.25 N/mm
    OK, LESS THAN ALLOW. (0.4 X 275=110 N/mm )
    E

    DESIGN FOR STEEL ANGLE (90x40x5)


    FOR GRANITE PANEL(790X305X30)
    1
    UNIT WEIGHT =
    2600 Kg/M
    2
    PANEL SCREEN DIMENSION
    a)
    HEIGHT =
    790 mm
    WIDTH =
    600 mm
    THICKNESS =
    30 mm
    3
    VOLUME =
    L x W x Thk
    600x790X30
    VOLUME = Vol=
    14220000 mm
    or Vol =
    0.01422 M
    4

    PAGE

    WEIGHT = WT.= UNIT WEIGHT x VOLUME


    WT. =
    2600 x
    0.01422
    36.97 Kg x 9.81
    362.69532 N
    say WT. =
    363 N

    Dead Weight of Granite


    Weight of angle
    Total laod

    363 N
    30 N
    393 N

    The above laod is sharing by two angles


    Therefore load on angle=

    196.5 N

    AT SECTION xx
    x

    90
    F

    CAPACITY OF ANGLE
    I=
    b h
    12
    (90)(5)
    12

    b=
    h=
    c = 5/2 =

    90
    5
    2.5

    4
    937.5 mm
    CHECK FOR BENDING, SHEAR AND DEFLECTION

    fb =
    BENDING

    Mc
    I

    fb =

    17685 x 1.5
    937.5

    fb =

    47.16 N/mm

    ALLOW. Fb = 0.66Fy = 0.66(275)=


    PAGE

    but M = Wt. ( s )
    M = 197(90)
    M=
    17685 N-mm

    OK, LESS THAN ALLOW. Fb

    181.5 N/mm

    fv =

    SHEAR

    fv =
    fv =

    P
    A
    197
    450
    0.438 N/mm

    ALLOW. Fv = 0.4Fy = 0.4(275)=


    3

    WHERE P = WT. = 197 N


    A = SECT. AREA = 90(5)
    A=
    450 mm

    OK, LESS THAN ALLOW. Fv


    110 N/mm

    DEFLECTION
    P l3
    3EI
    (197x90x90x90)
    3(200000) 937.5

    def =

    WHERE :

    L=
    P = WT. =

    90 mm
    197 N

    0.255 mm
    ALLOW. DEF = L/240 = 90(240) = 0.5 mm0.375 mm
    THE def < ALLOW. DEF, OK

    CHECK ON THE ANCHOR BOLTS


    DL ( WT.)

    197 N

    Try use 8 mm () bolt


    5

    SHEAR DUE WT. ONLY


    fv (bolts) = Rb
    As
    but Wt. = Rb

    Rb =
    Rb =
    fv (bolts) =

    but As =

    (d)
    4
    As = 3.141592654( 8 )
    4
    As =
    50.27 mm

    197
    1
    197 N

    805
    113
    50.27
    fv (bolts) =
    3.92 N/mm
    OK, LESS THAN ALLOW. (0.4 X 275=110 N/mm )
    PAGE

    CHECKING FOR CAPACITY OF HORIZONTAL CHANNEL SCETION(40X20X3)

    Loads Considered
    Self weight of Channel
    W

    Case 1
    Moment

    197.00 N
    113.00 N
    40 N

    a
    b
    l

    150 mm
    450 mm
    600 mm

    197.00 N
    Wab/l
    KNm

    22162.5

    Nmm

    Case 1
    Moment
    W

    113.00 N
    12712.5 Nmm

    Total Moment

    I=

    34875 Nmm
    0.034875 KNm

    b h
    12
    (600)(40)
    12

    b=
    h=
    c = 5/2 =

    600
    40
    20

    4
    3200000 mm
    CHECK FOR BENDING, SHEAR AND DEFLECTION

    fb =
    BENDING
    fb =

    Mc
    I

    but M = Wt. ( s )
    M = 3200000
    M=
    34875 N-mm

    34875 x 20
    3200000

    fb = 0.2179688 N/mm
    ALLOW. Fb = 0.66Fy = 0.66(275)=
    PAGE

    OK, LESS THAN ALLOW. Fb

    181.5 N/mm

    Design of Angle (150x40x5)

    TYPICAL PLAN OF ANGLES


    Laods coming on Angle

    Total Weight
    This load is taking by two Angles

    PAGE

    197.00 N
    113.00 N

    Weight of granite
    Weight of granite
    Extra Loads from All
    connections

    100 N
    410.00 N
    205

    AT SECTION xx
    x

    20

    150
    I

    CAPACITY OF ANGLE
    I=
    b h
    12
    (150)(20)
    12

    b=
    h=
    c = 5/2 =

    150
    20
    10

    4
    100000 mm
    CHECK FOR BENDING, SHEAR AND DEFLECTION

    fb =

    Mc
    I

    fb =

    30750 x 1.5
    100000

    BENDING

    fb =

    3.075 N/mm

    ALLOW. Fb = 0.66Fy = 0.66(275)=


    2

    fv =

    SHEAR

    fv =
    fv =

    OK, LESS THAN ALLOW. Fb

    181.5 N/mm

    P
    A

    WHERE P = WT. = 205 N


    A = SECT. AREA = 150(20)
    A=
    3000 mm

    205
    3000
    0.068 N/mm

    ALLOW. Fv = 0.4Fy = 0.4(275)=


    3

    but M = Wt. ( s )
    M = 205(150)
    M=
    30750 N-mm

    OK, LESS THAN ALLOW. Fv


    110 N/mm

    DEFLECTION
    def =

    Pl
    3EI
    (210x150x150x150)
    3(200000) 100000

    WHERE :

    L=
    P = WT. =

    0.012 mm
    ALLOW. DEF = L/240 = 130(240) = 0.5 mm0.625 mm
    THE def < ALLOW. DEF, OK

    PAGE

    150 mm
    210 N

    CONCLUSION
    a
    b
    c

    Use 90x40x5mm angles with panel size not exceeding as mentioned above
    Use 40x40x5mm angles with panel size not exceeding as mentioned above
    Use 8 mm SS Bolts with embedded length of minimum 150 mm

    You might also like