Scribd
Upload
81 views2 pages

Fault Simulation: Please Select ID of Desired Device

The document details the results of a fault simulation test. It lists the nominal frequency and voltage as 50 Hz and 50 V. The fault start and end voltages were 57.74 V and 5 V, decreasing in steps of 5 V. The fault current was set to 1 A. The test recorded the trip time in seconds for each fault voltage level from 57.74 V down to 7.74 V. A graph shows the relationship between fault voltage and trip time.

Uploaded by

zinab90
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
81 views2 pages

Fault Simulation: Please Select ID of Desired Device

The document details the results of a fault simulation test. It lists the nominal frequency and voltage as 50 Hz and 50 V. The fault start and end voltages were 57.74 V and 5 V, decreasing in steps of 5 V. The fault current was set to 1 A. The test recorded the trip time in seconds for each fault voltage level from 57.74 V down to 7.74 V. A graph shows the relationship between fault voltage and trip time.

Uploaded by

zinab90
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Fault

Fault Simulation
Frequency

50 Hz

Nominal Voltage
Nominal Current

50 V
1 A

Fault Start Voltage


Fault End Voltage
Voltage Step
Fault Current

57.74
5
-5
1
Fault Voltage
57.74
52.74
47.74
42.74
37.74
32.74
27.74
22.74
17.74
12.74
7.74

Device ID

Type

Serial Nr

please select ID
of desired
device

V
V
V
A
Trip Time
9.74E-01
2.02E+00
1.83E+00
1.85E+00
1.78E+00
1.89E+00
1.19E+00
1.36E+00
1.33E+00
2.96E+00
2.36E+00

3.50E+00
3.00E+00
2.50E+00
2.00E+00
1.50E+00
1.00E+00
5.00E-01
0.00E+00
57.74

Seite 1

47.74

37.74

27.74

17.7

Fault

LPT Port

37.74

27.74

LPT Address

17.74

7.74

Seite 2

You might also like