Scribd Logo
Upload

Welcome to Scribd!

  • 119 views

    CSSR Topic

    Uploaded by

    quens884
    This document discusses troubleshooting a cell with low CSSR (15%-60%) where the typical causes have been ruled out. Suggestions are provided based on the cell statistics, including the cell possibly being at a location area boundary causing high location update requests, low call setup indications indicating SDCCH blocking or timeout, and providing formulas to calculate CSSR accurately. The discussion clarifies the components of the CSSR formula and recommends alternatives to consider non-circuit services and SDCCH access failures.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd

    CSSR Topic

    Uploaded by

    quens884
    119 views3 pages
    This document discusses troubleshooting a cell with low CSSR (15%-60%) where the typical causes have been ruled out. Suggestions are provided based on the cell statistics, including the cell possibly being at a location area boundary causing high location update requests, low call setup indications indicating SDCCH blocking or timeout, and providing formulas to calculate CSSR accurately. The discussion clarifies the components of the CSSR formula and recommends alternatives to consider non-circuit services and SDCCH access failures.

    Original Description:

    Telekomunikasi

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses troubleshooting a cell with low CSSR (15%-60%) where the typical causes have been ruled out. Suggestions are provided based on the cell statistics, including the cell possibly being at a location area boundary causing high location update requests, low call setup indications indicating SDCCH blocking or timeout, and providing formulas to calculate CSSR accurately. The discussion clarifies the components of the CSSR formula and recommends alternatives to consider non-circuit services and SDCCH access failures.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    119 views3 pages

    CSSR Topic

    Uploaded by

    quens884
    This document discusses troubleshooting a cell with low CSSR (15%-60%) where the typical causes have been ruled out. Suggestions are provided based on the cell statistics, including the cell possibly being at a location area boundary causing high location update requests, low call setup indications indicating SDCCH blocking or timeout, and providing formulas to calculate CSSR accurately. The discussion clarifies the components of the CSSR formula and recommends alternatives to consider non-circuit services and SDCCH access failures.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    You are on page 1of 3

    improve CSSR :

    I think to improve CSSR you must improve other KPIs as : SD block, TCH drop, SD
    drop... Because CSSR is relative to these KPI. You can look formula of CSSR.
    Plus TCH Congestion and correct CGI both on BSC and NSS.
    Please check assignment rate per trx on cells with low cssr.
    check uplink , downlink qualty of cells, check overshooting, TCH congestion , SD
    congestion, sd drop, sd assign is not included in Cssr formula as far as i know
    .but not sure about it.Please check all these things and let us know did you fin
    d any issue in above mentioned kpi's
    Cases :
    Hi all
    In one cell of Huawei site CSSR is very low (15%-60%)by statistics.
    1. DT measurement has been done, but no any problem, CSSR is 100 % in DT.
    2. No hardware issue
    3. No transmission alarm
    4. All rest KPIs are normal
    This is formula for CSSR:
    [Success Rate of TCH Assignment]*[Success Rate of Call Setup(immediate assignmen
    t)]/100
    This formula is the same for all Huawei cells and I have never seen any unknown
    problem like this.
    If someone of you has idea please share your experience with me.
    Thanks in advance
    Step :
    Yes yes, I found. Thanks.
    Can location update failure affect to CSSR even no SD congestion?
    Hi
    Ideally,LU shouldn't be considered for calculating CSSR,but the formula you are
    using considers SDCCH drop during LU.So,yes,your CSSR will get impacted.
    P.S:There is a way out & you will find that in that very post.
    I have defined "Channel Request (Packet Call)" is 500-800-1800 times on this cel
    l.
    Actually what does it mean, what is Packet Call?
    Channel Request for Packet Call means the MS is sending a RACH to access the PS
    services.
    please have a look stat for one hour of the mention cell. Its CSSR is very low.
    I can't find the cause.

    Maybe you can give some ideas to find the reason, PLEASE. Thanks a lot.
    Start Time 13/07/2010 06:00:00
    Object Name CellA
    CA300J:Channel Requests (Circuit Service) 208
    CA303J:Call Setup Indications (Circuit Service) 45
    Call Setup Success Rate 21.635
    CA3030J:Call Setup Indications (SDCCH) (Circuit Service) 45
    CA3039J:Call Setup Indications (TCH) (Circuit Service) 0
    CA303A:Call Setup Indications (Call Type) 3
    CA303B:Call Setup Indications (Non-Call Type) 42
    A300A:Channel Requests (MOC) 4
    A300C:Channel Requests (MTC) 4
    A300D:Channel Requests (Emergency Call) 0
    A300E:Channel Requests (Call Re-establishment) 0
    A300F:Channel Requests (Location Updating) 200
    A300H:Channel Requests (Packet Call) 100
    A300I:Channel Requests (LMU+Reserved) 0
    A300K:Channel Requests (Protocol Incompatible) 0
    CA300A:Channel Requests (Call Type) 8
    CA300B:Channel Requests (Non-Call Type) 300
    CA303H:Call Setup Indications (Packet Service) 0
    K3000:SDCCH Seizure Requests 208
    K3003:Successful SDCCH Seizures 208
    K3003A:Successful SDCCH Seizures (Call Type) 7
    RCA313:Success Rate of TCH Assignment 100
    RA303I:Success Rate of Call Setup (Immediate Assignment) 21.635
    From this data,what I can conclude is:
    1.This cell is either at LA boundary or overshooting at LA boundary beacuse LU r
    equest is high.
    2.Call setup Indication is Low,which means there is either Imm. assignment rejec
    t(SDCCH Blk) or call setup indication timed out(T3101 expiry).
    3.Your immediate aasignment success is poor for Non-call type.
    Suggestions
    1.Give tilt to the cell if overshooting
    2.Check Co-BSIC-BCCH cells,if nearby
    3.Increase Cell reselection hysteresis if on LA boundary.
    4.Check for SDCCH Blocking(remote possibility)
    This formula is actually too gross,you should use CSSR for CS services only.
    P.S:
    You can increase the "RACH Min. Access level","RACH Busy threshold",& "RACH erro
    r threshold" to reduce this,but you cant eliminate the effect totally.
    It is better if you use "Immediate assignment commands/Immediate Assignment requ
    ests" in place of RA303I.
    You mean I should use following formula for CSSR?
    Immediate assignment commands/Immediate Assignment requests*100
    Or what is useful formula for CSSR in Huawei system?
    Call Setup Success Rate=BSS Call Establishment Success Rate = [([Success Rate of
    Call Setup (Immediate Assignment)/{100}) x ([Success Rate of TCH Assignment]/{1
    00}) x (1 - ([Call Drop Rate on SDCCH]/{100})) x {100}.

    In this formula,it is recommended to replace [Success Rate of Call Setup (Immedi


    ate Assignment)] by "Immediate assignment commands/Immediate Assignment requests
    ".
    Hi all,
    Instead of "Immediate assignment commands/Immediate Assignment requests" I would
    recommend using "Channel Requests (Call Type)/Call Setup Indications(Call Type)
    ".
    This excludes Location Update, but considers SDCCH access failures for MOC or MT
    C (meaning: BSC sends Immediate Assignment but MS does not respond on a given ti
    me, which is given by T3101)
    What is the value of RACH Min Access level ? TX integer ? RACH busy thrshold ?
    Hi HW
    RACH Min. Access Level (dbm): -106
    RACH busy Threshold: 16
    Tx-integer: 32
    You have checked if this cell is overshoot from TA measurment ? also you have to
    check the UL DL unbalance (TRX Level)
    Hi, I want to know the calculation of transit traffic in ericsson MSC. POI & int
    er MSC is also connected to that msc. also I want to calculate the traffic in sa
    me BSC connecteing to the MSC. Will anybody help.
    In the case of Call Setup Indications (SDCCH) (Circuit Service) and Call Setup I
    ndications (TCH) (Circuit Service), where This counter provides the number of ES
    T IND messages received by the BSC from the BTS when the MS access reason indica
    ted in the EST IND message is not Packet Service and the type of the access chan
    nel assigned to the MS is SDCCH, respectively TCH, what are the scenarios when t
    he access channel is SDCCH and when it is TCH?

    You might also like