0% found this document useful (0 votes)
74 views4 pages

Chapter13 Current Sweep Generators PDF

1. The document describes a current sweep generator circuit using an inductor and transistor. It provides calculations to determine: 2. The voltage required from the power supply to increase the inductor current from 0 to 50 mA in 1 ms is 5V. With a damping resistance of 10 ohms, the waveforms of the inductor current and collector-emitter voltage are shown. 3. For a maximum collector-emitter voltage of 60V, the maximum damping resistance that can be used is 1100 ohms.

Uploaded by

vmspraneeth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
74 views4 pages

Chapter13 Current Sweep Generators PDF

1. The document describes a current sweep generator circuit using an inductor and transistor. It provides calculations to determine: 2. The voltage required from the power supply to increase the inductor current from 0 to 50 mA in 1 ms is 5V. With a damping resistance of 10 ohms, the waveforms of the inductor current and collector-emitter voltage are shown. 3. For a maximum collector-emitter voltage of 60V, the maximum damping resistance that can be used is 1100 ohms.

Uploaded by

vmspraneeth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Pulse and Digital Circuits

Venkata Rao K., Rama Sudha K. and Manmadha Rao G

Chapter 13
Current Sweep Generators
1.

In the circuit shown in Fig.13p.1, L = 100 mH. It is required that the current in L
increases from 0 to 50 mA in 1 ms. Find V CC for R L = 0 and V CE(sat) = 0. If R d
(damping resistance) is 10 , draw the waveforms of i L and vCE with voltage levels.
If the transistor can withstand a collector to emitter voltage of 60 V, what is the
maximum value of R d that may be used?

Fig.13p.1 The given current sweep generator


Solution:
Assume diode is ideal. Given that the inductor current increases from 0 to its maximum
value of 50 mA in 1 ms, as shown in Fig. 1.1.

(a) VCC

Fig. 1.1 Calculation of the slope of the sweep


di
50 0
L L 100 103
5V
dt
1 0

(b) Time constant

L 100 103

10 ms
Rd
10

For 0 < t < T s

Dorling Kindersley India Pvt. Ltd 2010

Pulse and Digital Circuits

Venkata Rao K., Rama Sudha K. and Manmadha Rao G

VCC t 1 RL RCS t
1

L 2
L

at t Ts 0.001 s

iL

0 0
5 1 103 1
0.001
1
3
3
100 10 2 100 10

I L 0.05 A
For t > T s , i L decays with a time constant 10 ms.
The waveforms of i L and v CE are shown in Fig. 1.2.
iL I L

Fig. 1.2 Waveforms of i L and v CE


Spike amplitude = I L R d = 0.0510 = 0.5 V.
(c) If the transistor can withstand a collector to emitter voltage of 60 V,
vCE VCC I L Rd (max)
Rd (max)

vCE VCC
55

1100 .
IL
0.05

2. For the circuit shown in Fig.13p.2, at t = 0 the input waveform is applied to the base
of the transistor.
(a) Calculate the time required for the inductor current to reach a maximum value of I L .
Assume that inductor is ideal and the saturation resistance of transistor is zero and h FE =
40.
(b) Calculate the time required for the inductor current to decay to 10 mA.
(c) If the sum of saturation resistance and inductive resistance is 20 , determine the time
required for sweep, T s , to reach its maximum value I L .
(d) Calculate collectoremitter voltage at T s when the transistor is reverse-biased.

Dorling Kindersley India Pvt. Ltd 2010

Pulse and Digital Circuits

Venkata Rao K., Rama Sudha K. and Manmadha Rao G

Fig.13p.2 The given current sweep and the input


Solution:

vB VBE (20 0.7) V

1.93 mA .
RB
10 k
iL I L hFE I B 40 1.93 77.2 mA
Since the transistor is in saturation, the voltage available for charging the inductor is:

(a) At t = 0, the base current iB I B

v L = V CC V CE (sat) = 20 0.3 = 19.7 V


v
i L max L Ts
L
3
L iL 10 10 77.2 103

39.18 106 s.
Ts
19.7
vL
(b) At t Ts , the transistor is reverse-biased, current flowing in the inductor decays with a
L 10 103

1ms. The time duration in which the current in


Rd
10
inductor decays to 10 mA can be found from:
time constant

iL I L e
We have to calculate t at which i L = 10 mA.
3
10 10 3 77.2 10 3 e t / 110
3
et /10 7.72
t 2.04 ms.
(c) If we consider inductor resistance R L and transistor saturation resistance R CS , the
current flowing in the circuit is given by
vL
t ( R R ) / L
iL
1 e L CS
RL RCS
At t = T s , i L = I L .

Dorling Kindersley India Pvt. Ltd 2010

Pulse and Digital Circuits

Venkata Rao K., Rama Sudha K. and Manmadha Rao G

3
19.7
1 e 20t /1010

20
Ts 38.4 s
(d) At the instant when transistor is reverse-biased, v CE is equal to
vCE VCC I L Rd

77.2 103

20 77.2 103 10
20 0.772
20.772 V.

Dorling Kindersley India Pvt. Ltd 2010

You might also like