Scribd
Upload
231 views5 pages

Sequences of Functions - Pointwise and Uniform Convergence

The document defines and provides examples of pointwise and uniform convergence of sequences of functions. It begins by introducing sequences of real-valued functions and defines pointwise convergence as the limit of the sequence at each point existing. Several examples demonstrate pointwise convergence and non-convergence. Uniform convergence is then defined as the limit being uniform across all points, and an example shows a sequence can converge pointwise but not uniformly. The document concludes with a theorem relating uniform convergence to continuity.

Uploaded by

zanibab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
231 views5 pages

Sequences of Functions - Pointwise and Uniform Convergence

The document defines and provides examples of pointwise and uniform convergence of sequences of functions. It begins by introducing sequences of real-valued functions and defines pointwise convergence as the limit of the sequence at each point existing. Several examples demonstrate pointwise convergence and non-convergence. Uniform convergence is then defined as the limit being uniform across all points, and an example shows a sequence can converge pointwise but not uniformly. The document concludes with a theorem relating uniform convergence to continuity.

Uploaded by

zanibab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

MATH 401 - NOTES

Sequences of functions
Pointwise and Uniform Convergence
Fall 2005
Previously, we have studied sequences of real numbers. Now we discuss
the topic of sequences of real valued functions. A sequence of functions {fn }
is a list of functions (f1 , f2 , . . .) such that each fn maps a given subset D of
R into R.

I. Pointwise convergence
Definition. Let D be a subset of R and let {fn } be a sequence of functions
defined on D. We say that {fn } converges pointwise on D if
lim fn (x) exists for each point x in D.

This means that lim fn (x) is a real number that depends only on x.
n

If {fn } is pointwise convergent then the function defined by f (x) = lim fn (x),
n

for every x in D, is called the pointwise limit of the sequence {fn }.


Example 1. Let {fn } be the sequence of functions on R defined by fn (x) =
nx. This sequence does not converge pointwise on R because lim fn (x) =
n
for any x > 0.
Example 2.
Let {fn } be the sequence of functions on R defined by fn (x) = x/n. This
sequence converges pointwise to the zero function on R.
Example 3. Consider the sequence {fn } of functions defined by
nx + x2
n2
Show that {fn } converges pointwise.

for all x in R.

fn (x) =

Solution: For every real number x, we have:






x x2
1
1
2
lim fn (x) = lim + 2 = x lim
+x
lim
=0+0=0
n
n n
n n
n n2
n
1

Thus, {fn } converges pointwise to the zero function on R.


Example 4. Consider the sequence {fn } of functions defined by
fn (x) =

sin(nx + 3)

n+1

for all x in R.

Show that {fn } converges pointwise.


Solution: For every x in R, we have

sin(nx + 3)
1
1

n+1
n+1
n+1

Moreover,
1
= 0.
n
n+1
Applying the squeeze theorem for sequences, we obtain that
lim

lim fn (x) = 0

for all x in R.

Therefore, {fn } converges pointwise to the function f 0 on R.


Example 5. Consider the sequence {fn } of functions defined by fn (x) =
n2 xn for 0 x 1. Determine whether {fn } is pointwise convergent.
Solution: First of all, observe that fn (0) = 0 for every n in N. So the
sequence {fn (0)} is constant and converges to zero. Now suppose 0 < x < 1
then n2 xn = n2 en ln(x) . But ln(x) < 0 when 0 < x < 1, it follows that
lim fn (x) = 0 for 0 < x < 1

Finally, fn (1) = n2 for all n. So, lim fn (1) = . Therefore, {fn } is not
n

pointwise convergent on [0, 1].


Example 6. Let {fn } be the sequence of functions defined by fn (x) = cosn (x)
for /2 x /2. Discuss the pointwise convergence of the sequence.
Solution: For /2 x < 0 and for 0 < x /2, we have
0 cos(x) < 1.
2

It follows that
lim (cos(x))n = 0

for x 6= 0.

Moreover, since fn (0) = 1 for all n in N, one gets lim fn (0) = 1. Therefore,
n

{fn } converges pointwise to the function f defined by



0 if 2 x < 0 or 0 < x
f (x) =
1 if
x=0

Example 7. Consider the sequence of functions defined by


fn (x) = nx(1 x)n

on [0, 1].

Show that {fn } converges pointwise to the zero function.


Solution: Note that fn (0) = fn (1) = 0, for all n N. Now suppose
0 < x < 1, then
lim fn (x) = lim nxen ln(1x) = x lim nen ln(1x) = 0

because ln(1 x) < 0 when 0 < x < 1. Therefore, the given sequence converges pointwise to zero.
Example 8. Let {fn } be the sequence of functions on R defined by
 3
n
if
0 < x n1
fn (x) =
1 otherwise
Show that {fn } converges pointwise to the constant function f = 1 on R.
Solution: For any x in R there is a natural number N such that x does
not belong to the interval (0, 1/N ). The intervals (0, 1/n) get smaller as
n . Therefore, fn (x) = 1 for all n > N . Hence,
lim fn (x) = 1 for all x.

The formal definition of pointwise convergence


Let D be a subset of R and let {fn } be a sequence of real valued functions
defined on D. Then {fn } converges pointwise to f if given any x in D and
given any > 0, there exists a natural number N = N (x, ) such that
|fn (x) f (x)| < for every n > N.
Note: The notation N = N (x, ) means that the natural number N depends
on the choice of x and .
3

I. Uniform convergence
Definition. Let D be a subset of R and let {fn } be a sequence of real
valued functions defined on D. Then {fn } converges uniformly to f if given
any > 0, there exists a natural number N = N () such that
|fn (x) f (x)| < for every n > N

and for every x in D.

Note: In the above definition the natural number N depends only on .


Therefore, uniform convergence implies pointwise convergence. But the converse is false as we can see from the following counter-example.
Example 9. Let {fn } be the sequence of functions on (0, ) defined by
fn (x) =

nx
.
1 + n2 x2

This function converges pointwise to zero. Indeed, (1 + n2 x2 ) n2 x2 as n


gets larger and larger. So,
1
1
nx
=
lim
= 0.
n n2 x2
x n n

lim fn (x) = lim

But for any < 1/2, we have


 
 


fn 1 f 1 = 1 0 > .

n
n 2
Hence {fn } is not uniformly convergent.
Theorem. Let D be a subset of R and let {fn } be a sequence of continuous
functions on D which converges uniformly to f on D. Then f is continuous
on D

Homework
Problem 1.
Let {fn } be the sequence of functions on [0, 1] defined by fn (x) = nx(1x4 )n .
Show that {fn } converges pointwise. Find its pointwise limit.
Problem 2.
1
Is the sequence of functions on [0, 1) defined by fn (x) = (1 x) n pointwise
convergent? Justify your answer.
Problem 3.
Consider the sequence {fn } of functions defined by
fn (x) =

n + cos(nx)
2n + 1

for all x in R.

Show that {fn } is pointwise convergent. Find its pointwise limit.


Problem 4.
Consider the sequence {fn } of functions defined on [0, ] by fn (x) = sinn (x).
Show that {fn } converges pointwise. Find its pointwise limit. Using the
above theorem, show that {fn } is not uniformly convergent.

You might also like