Scribd
Upload
4K views

API Spec q1 9th Edition

This document provides a conformity matrix comparing the requirements of API Spec Q1 9th Edition to ISO 9001:2008. It outlines the design and development process requirements, including planning, inputs, outputs, review, verification, validation, approval, and management of changes. New requirements in the 9th Edition compared to ISO 9001 are highlighted. The matrix is intended to help companies ensure their quality management system meets the additional specifications for design and development of products in the oil and gas industry.

Uploaded by

vtsusr fv
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
4K views

API Spec q1 9th Edition

This document provides a conformity matrix comparing the requirements of API Spec Q1 9th Edition to ISO 9001:2008. It outlines the design and development process requirements, including planning, inputs, outputs, review, verification, validation, approval, and management of changes. New requirements in the 9th Edition compared to ISO 9001 are highlighted. The matrix is intended to help companies ensure their quality management system meets the additional specifications for design and development of products in the oil and gas industry.

Uploaded by

vtsusr fv
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Company:

Facility Name/ID:
Date:
Reference: API Spec Q1 9th Ed
Paragraph
Number

5.4
5.4.1

NOTE: Areas shaded in blue are new API Spec Q1 9th Edition requirements.
ISO 9001:2008 Reference
Requirement
Reference

NR in 9001*

Design and Development


Design and
The organization shall maintain a documented procedure to plan
Development Planning and control the design and development of the product.

7.3.1
7.3.1

The procedure shall identify:


a) the plan(s), including plan updates, used for design
development;

7.3.1a
7.3.1; 7.3.1c

b) the design and development stages;


c) the resources, responsibilities, authorities, and their interfaces
to ensure effective communication;
d) the review, verification, and validation activities necessary to
complete each design and development stage; and

7.3.1b

5.4.2

NR in 9001*

e) the requirements for a final review of the design (see 5.4.5).

NR in 9001*

When design and development activities are performed at


different locations within the same organization, the procedure
shall identify the controls required to ensure that the designs
meet the requirements of 5.4.

NR in 9001*

When design and development are outsourced, the organization


shall ensure the supplier meets the requirements of 5.6.1.6.

7.3.2

Design and
Development Inputs

7.3.2a; 7.3.2d
NR in 9001*
7.3.2d
7.3.2d
NR in 9001*
7.3.2c

5.4.3

7.3.2b
NR in 9001*
NR in 9001*
7.3.3
7.3.3

Inputs shall be identified and reviewed for adequacy,


completeness, and lack of conflict.
Inputs shall include functional and technical requirements, and
the following, as applicable:
a) customer-specified requirements (see 5.1);
b) requirements provided from external sources, including API
product specifications;
c) environmental and operational conditions;
d) methodology, assumptions, and formulae documentation;

e) historical performance and other information derived from


previous similar designs;
f) legal requirements; and
g) results from risk assessments (see 5.3).
Records of design inputs shall be maintained (see 4.5).
Design and
Outputs shall be documented to allow verification against the
Development Outputs design and development input requirements.
Outputs shall:

API Spec Q1 9th Edition Conformity Matrix

Page 1 of 3

FM-186 Rev 2 Effective 7/16/2013

Company:
Facility Name/ID:
Date:
Reference: API Spec Q1 9th Ed
Paragraph
Number

NOTE: Areas shaded in blue are new API Spec Q1 9th Edition requirements.
ISO 9001:2008 Reference
Requirement
Reference

7.3.3a

a) meet the input requirements for design and development;

7.3.3b

b) provide appropriate information for purchasing, production,


and servicing;
c) identify or reference design acceptance criteria (DAC);
d) include identification of, or reference to, products and/or
components deemed critical to the design;
e) include results of applicable calculations; and
f) specify the characteristics of the product that are essential for
its safe and proper use.
Records of design outputs shall be maintained (see 4.5).

7.3.3c
NR in 9001*
NR in 9001*
7.3.3d
NR in 9001*
5.4.4

7.3.4
7.3.4a

Design and
Development Review

7.3.4b
7.3.4

Participants in such review(s) shall include representatives of


functions concerned with the design and development stage(s)
being reviewed.
Records of the results of the review(s) and any necessary actions
shall be maintained (see 4.5).

7.3.4
5.4.5

7.3.5

Design and
Development
Verification and Final
Review

7.3.4; 7.3.5
5.4.6

7.3.6

At suitable stages, review(s) shall be performed:


a) to evaluate the suitability, adequacy, and effectiveness of the
results of design and development stages to meet specified
requirements; and
b) to identify any problems and propose necessary actions.

To ensure that the design and development outputs have met the
design and development input requirements, design and
development verification and a final review shall be conducted
and documented in accordance with planned arrangements (see
5.4.1).
Records of design and development verification and the final
design review shall be maintained (see 4.5).

Design and
Development
Validation and
Approval

7.3.6
NR in 9001*
NR in 9001*

API Spec Q1 9th Edition Conformity Matrix

Design and development validation shall be performed in


accordance with planned arrangements (see 5.4.1) to ensure that
the resulting product is capable of meeting the specified
requirements.
Validation shall be completed prior to the delivery of the product,
when possible.
The completed design shall be approved after validation.
Competent (see 4.3.2.2) individual(s) other than the person or
persons who developed the design shall approve the final design.

Page 2 of 3

FM-186 Rev 2 Effective 7/16/2013

Company:
Facility Name/ID:
Date:
Reference: API Spec Q1 9th Ed
Paragraph
Number

5.4.7

NOTE: Areas shaded in blue are new API Spec Q1 9th Edition requirements.
ISO 9001:2008 Reference
Requirement
Reference

7.3.6

Records of the design and development validation, approval, and


any necessary actions shall be maintained (see 4.5).

7.3.7

Design and
Design and development changes shall be identified. The changes
Development Changes shall be reviewed, verified and validated, as appropriate, and
approved before implementation.
The review of design and development changes shall include
evaluation of the effect of the changes on product and/or their
constituent parts already delivered.
Design and development changes including changes to design
documents, shall require the same controls as the original design
and development.
Records of design and development changes, reviews of those
changes and any necessary actions shall be maintained (see 4.5).

7.3.7

NR in 9001*

7.3.7

API Spec Q1 9th Edition Conformity Matrix

Page 3 of 3

FM-186 Rev 2 Effective 7/16/2013

You might also like