Scribd
Upload
213 views

Dump 1

This document contains configuration settings for a network device including: - Enabling an FTP server and setting the router ID and VLAN configurations - Configuring user accounts and access for local users "admin" and "huawei" - Configuring interfaces including IP addresses, VLAN assignments, and trunk/access settings - Setting routing, SNMP, and console configurations

Uploaded by

Gerardo Butler
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
213 views

Dump 1

This document contains configuration settings for a network device including: - Enabling an FTP server and setting the router ID and VLAN configurations - Configuring user accounts and access for local users "admin" and "huawei" - Configuring interfaces including IP addresses, VLAN assignments, and trunk/access settings - Setting routing, SNMP, and console configurations

Uploaded by

Gerardo Butler
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

scheme

/0/1

!Software Version V200R003C00SPC300


#
sysname TNCHNPEROSS1
#
FTP server enable
#
router id 10.159.252.23
#
vlan batch 2 to 49 51 to 4094
#
undo http server enable
undo http secure-server enable
#
clock timezone IST add 05:30:00
#
diffserv domain default
#
vlan 104
description link for test bsc
vlan 200
description U2000 connectivity
#
aaa
authentication-scheme default
---- More ---default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %@%@+J6IU&kbRQ]|<9>!cW}+u.[@%@%@
local-user admin privilege level 3
local-user admin ftp-directory flash:
local-user admin service-type telnet ftp http
local-user huawei password cipher %@%@^>-OU#39/9'1JO1YJ"n&u.ZP%@%@
local-user huawei privilege level 3
local-user huawei ftp-directory flash:
local-user huawei service-type telnet ftp http
#
interface Vlanif104
description for test bsc
ip address 192.168.40.210 255.255.255.240
#
interface Vlanif200
description U2000 connectivity
ip address 10.159.252.23 255.255.255.224
vrrp vrid 200 virtual-ip 10.159.252.22
vrrp vrid 200 priority 200
vrrp vrid 200 preempt-mode timer delay 255
#
---- More ---ip address 192.168.100.1 255.255.255.248
#
interface Eth-Trunk1
description B2B L2 Link
port link-type trunk
undo port trunk allow-pass vlan 1
port trunk allow-pass vlan 200
#
interface GigabitEthernet0/0/1

port link-type access


port default vlan 200
#
interface GigabitEthernet0/0/2
#
interface GigabitEthernet0/0/3
#
interface GigabitEthernet0/0/4
#
interface GigabitEthernet0/0/5
#
interface GigabitEthernet0/0/6
#
interface GigabitEthernet0/0/7
---- More ---interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
---- More ---interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
#
interface GigabitEthernet0/0/25
#
interface GigabitEthernet0/0/26
description Test_BSC
port link-type access
port default vlan 200
#
interface GigabitEthernet0/0/27
#
interface GigabitEthernet0/0/28
description test

port link-type access


port default vlan 104
---- More ---interface GigabitEthernet0/0/29
#
interface GigabitEthernet0/0/30
#
interface GigabitEthernet0/0/31
#
interface GigabitEthernet0/0/32
#
interface GigabitEthernet0/0/33
#
interface GigabitEthernet0/0/34
#
interface GigabitEthern
#
interface GigabitEthernet0/0/36
#
interface GigabitEthernet0/0/37
#
interface GigabitEthernet0/0/38
#
interface GigabitEthernet0/0/39
#
interface GigabitEthernet0/0/40
---- More ---interface GigabitEthernet0/0/41
#
interface GigabitEthernet0/0/42
#
interface GigabitEthernet0/0/43
#
interface GigabitEthernet0/0/44
#
interface GigabitEthernet0/0/45
#
interface GigabitEthernet0/0/46
port link-type access
port default vlan 200
#
interface GigabitEthernet0/0/47
description B2B L2 Link
eth-trunk 1
#
interface GigabitEthernet0/0/48
description B2B L2 Link
eth-trunk 1
#
interface XGigabitEthernet0/0/1
---- More ---interface XGigabitEthernet0/0/2
#
interface XGigabitEthernet0/0/3
#
interface XGigabitEthernet0/0/4
#
interface NULL0
#
ip route-static 10.159.194.0 255.255.255.0 192.168.40.219

vty 0 4

ip route-static 10.159.252.0 255.255.255.224 10.159.252.155.255.255.0 10.159.252


.237 description 2NDFLOOR
#
snmp-agent
snmp-agent local-engineid 800007DB039017ACB34E30
snmp-agent community read cipher %$%$VO=x"AS=>Lc5"LEPc+h@zTm6FOWJXUA{I+y5){#3ifP
0Tm9z$Po#0(.fkK\"0^COY7R2mBzT%$%$
snmp-agent sys-info version all
snmp-agent trap enable
#
header login information "You are about to log on to a proprietary computer syst
em where access is provided, by the Owner of the computer system, only to author
ised users.Unauthorized access to this system may be subjected to legal action."
#
user-interface con 0
authentication-mode password
set authentication password cipher %@%@nd"UE5`WZV,}GsH/"Ay5zJ"3h%*tRVO_rUg}0MXR
2Sl=J"6z%@%@
---- More ---authentication-mode aaa
idle-timeout 5 0
screen-length 5
protocol inbound all
user-interface vty 16 20
protocol inbound all
#
return
<TNCHNPEROSS1>
<TNCHNPEROSS1>
<TNCHNPEROSS1>
<TNCHNPEROSS1>qyuit
User interface con0 is available

Please Press ENTE

You might also like