Samsung Performance Restoration v.1.0 Installation Guide

Download as pdf or txt
Download as pdf or txt
You are on page 1of 19

Sa

amsu
ung
Perfform
mance
e Resstora
ation v.1.0
0
Introducction and
a Installattion Guide

2014.10 (Rev
(
1.0)

Legal Disclaimer
SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE
PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE.
Products and specifications discussed herein are for reference purposes only. All
information discussed herein is provided on an AS IS basis, without warranties of any
kind. This document and all information discussed herein remain the sole and exclusive
property of Samsung Electronics. No license of any patent, copyright, mask work,
trademark or any other intellectual property right is granted by one party to the other
party under this document, by implication, estoppels or otherwise. Samsung products
are not intended for use in life support, critical care, medical, safety equipment, or
similar applications where product failure could result in loss of life or personal or
physical harm, or any military or defense application, or any governmental procurement
to which special terms or provisions may apply. For updates or additional information
about Samsung products, contact your nearest Samsung office.

Copyright 2014
This material is copyrighted by Samsung Electronics. Any unauthorized
reproductions, use or disclosure of this material, or any part thereof, is
strictly prohibited and is a violation under copyright law.

Trademarks & Service Marks


The Samsung Logo is the trademark of Samsung Electronics. Adobe is a
trademark and Adobe Acrobat is a registered trademark of Adobe
Systems Incorporated. All other company and product names may be
trademarks of the respective companies with which they are associated.

2
2

2014.10 (Rev 1.0)

Introduction
The Performance Restoration software is designed to restore Samsung
SSD 840 EVO SSD easily. Performance Restoration will restore
Samsung SSD 840 SSD Performance.
Samsung Performance Restoration software is developed and
distributed exclusively for owners of Samsung Solid Sate Drives (SSDs).

Performance Restoration Version 1.0


Performance Restoration version 1.0 features
- Support Model : Samsung SSD 840 EVO, 840 EVO mSATA
- Firmware Update
- SSD Performance Restoration

2014.10 (Rev 1.0)

System Requirements
Component

Operating System

Requirement
Windows XP SP2 (32bit)
Windows Vista (32/64bit)
Windows 7 (32/64bit)
Windows 8 & 8.1(32/64bit)

Disk Capacity

minimum 20MB available for installation

Supported Partition Types

MBR, GPT

Supported Languages

English

The following Samsung SSDs are supported*:


Samsung SSD 840 EVO (2.5)
Samsung SSD 840 EVO mSATA
SSD

*Some features may not be supported for all models.

2014.10 (Rev 1.0)

Driver Support
Chipset
Intel

AMD

Driver
Microsoft

Supported
Yes

Intel

Yes

Microsoft

Yes

AMD

Yes(Latest Driver only)

NVIDIA

Yes

Precautions
1) The SSD should not be removed or disconnected while SSD
Restoration is in progress. Doing so could result in data corruption.
2) Data corruption may result if the user terminates the Performance
Restoration application abnormally while SSD Performance
Restoration.
3) There is always the risk of data loss when updating SSD firmware. It is
imperative that the user backs up any important data before performing a
firmware update with Performance Restoration application or Dos Solution.
4) The SSD may be permanently damaged if it is unplugged while the
firmware update process is in progress via the Performance Restoration
application or DOS Utility.

General Limitations
1) Performance Restoration is designed specifically for Samsung SSD 840
EVO Series. Performance Restoration function is not supported for nonSamsung SSD 840 EVO Series SSD.
2) Samsung Performance Restoration does not work with SSDs connected via
the SCSI controller interface and USB to SATA interface.
3) Only MBR and GPT partition types are supported. Performance
Restoration may not work with other partition types.
4) Performance Restoration will not work on SSDs that are locked with a user
password.
5

2014.10 (Rev 1.0)

5) The user may need to manually refresh the disk list in System Information for
Performance Restoration to accurately reflect all connected/removed disks.
6) It may be necessary to manually refresh the disk list in System Information
before performing Performance Restoration on a newly attached disk.
7) Performance Restoration supports only the NTFS file system.
8) If RAIDmode turns on in SATA configuration, It is not supported by Samsung
Performance Restoration and DOS application.
9) Performance Restoration does not support dynamic disk.
10) PC will be shut down automatically after firmware update
(Performance Restoration counts down 20 seconds before shutdown)
11) Security mode (Class 0, TCG/Opal or Encrypted Drive) must be disabled
(unlocked) before removing and installing onto another PC.
12) Firmware Update may fail on Samsung brand SSDs connected to AMD
Controller. Please retry using default sata AHCI controller(Microsoft drivers)
13) If user is using any custom storage driver, then Performance Restoration
may not function properly. Please always use the latest storage driver or
Microsoft driver.
14) Performance Restoration supports default magnification (100%) of Display.
15) Performance Restoration cant communicate with SSD possibly due to
security, Vaccine or DRM application.
16) Performance Restoration cant support virtual disk created by Hypervisor.
17) If user tries to do firmware update on the different system as a secondary
drive using Performance Restoration, Installed OS such as Windows 7, Vista,
2008 R2 wont boot due to Windows policy. Performance Restoration doesnt
support this case.

2014.10 (Rev 1.0)

User Installation Guide


1. (Normal Mode) If the Disk has more than 10% of free space.
STEP 1. Start Performance Restoration

STEP 2. Update Firmware

2014. 07 (Rev 2.7.)

STEP 3.
3 Restora
ation is in Progress
P

STEP 4.
4 Restora
ation is com
mpleted

2. (Advvanced Mo
ode) If the Disk
D doesn
nt have mo
ore than 10
0% of free space.
STEP 1. Start Pe
erformance
e Restoration

STEP 2.
2 If the SS
SD doesntt have morre than 10%
% of free space,
s
go to STEP 3.

STEP 3.
3 Remove
e unused fiiles and prrograms for having more
m
than 1
10% of free
e space
in disk.
d

STEP 4.
4 After ensuring morre than 10%
% of free space.
s
Clicck the Startt button.

10

STEP 5.
5 Restora
ation is in Progress
P

STEP 6.
6 Restora
ation compllete

11

3. (Advvanced Mo
ode) If there
e is a compatibility is
ssue with chipset
c
drivver
STEP 1. Start Pe
erformance
e Restoratio
on

STEP 2 Error me
essage : if system
s
use third parrty driver orr old driverr

12

STEP 3 Update to
t the latesst driver or Microsoft driver
1) Upd
date to Microssoft driver
i)
Right-cllick on My co
omputer
Click M
Management (Below screen will be shown)
s
ii)

iii)

Device Manag
ger
Click D

13

iv)

Click Devices by connection in View menu

v)

Click Properties after right-click on driver for connected SSD

14

vi)

Click Uninstall on Drive


D
section in the scree
en of Propertties

vii)

OK
Click O

15

viii)

Rebootiing after drivver uninstall

ix)

nected to Sttandard AH
HCI
Check : SSD is conn

16

date to the lattest AMD Driver


2) Upd
A. Visit support page on motherboard
m
m
manufacture
e
s
and motherboard
m
d model
B. Check the system

C.

a install the latest SATA


TA AHCI drive
er
Download and

date to the lattest Microsofft Driver


3) Upd
A.

Click Upda
ate Driver on
n Driver section in the sc
creen of Properties

B.

w latest driverr
Update automatically if there is new

17

STEP 4.
4 Execute
e Performa
ance Resto
oration Softtware again.

STEP 5 Restorattion Compllete.

18

www.sam
msung .com/ssd
d,

2014.10 (Rev 1.0)


www.sam
msung.com/sam
msungssd

All brand and product


p
names arre trademarks off their respective companies.
Design and contents of this manual
m
are subje
ect to change witthout notice.

2014 Samsung Electronics,


E
Co., Ltd. All rights
s reserved.

19

You might also like